11 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@chrisviscaino281 6 күн бұрын
You jsut jacked the car from the rad support without disconnecting anything was that enough room to get the passenger up pipe out ?
@ParkerMotorWorks 5 күн бұрын
Yes
@broccolirob5085 7 күн бұрын
Shenandoah stove .I got me one too Air intake not on .
@Stahodad Ай бұрын
Thanks for the video. I need to do this too.
@DarrenTowner 2 ай бұрын
Just bought a brand new 2023 4010 mule a month ago. I had it 4 days and dealership called me about returning it for a "recall". Something about seals in cooling system leaking after 8 hours. Mine had 5.9 when I returned it for recall. I cannot find a single thing on this recall. Even when I put in vin, it says no recalls for this unit. Nearly a month now and the parts haven't even came in....not happy. I too went with Mule for their "reliably" hope I didn't mess that up! Ps 1st ever commenting on KZbin after years of watching most everything. Just wanted your fans to know there is supposed to be a for these unit per dealership.
@ParkerMotorWorks 2 ай бұрын
I had a coolant leak at the start but it was from the t fitting the dealer installed to divert flow to the heater. Easy fix I'm sure they just tightened it or put a new gasket in. The fuel in oil hasn't gone away. I need to change the oil pretty frequently compared to what the service manual states. However I have no performance loss and the machine is still every bit as capable I just can't tell the height of the oil and the color is always milky. I need to send off a oil sample again however to see if it is still fuel or just bad condensation. Dipstick is always wet all the way up the tube but most of it is water bubbles collecting on the flat section of the dipstick tube. Hopefully the dealer takes care of you. Doesn't sound like it yet
@DarrenTowner 2 ай бұрын
You should get a recall paper in the mail. Just got mine. It's says the crankcase gasket needs replaced. Says job takes 2 hours once parts are received. Dealership had mine for exactly a month.
@ParkerMotorWorks 2 ай бұрын
Wow that's terrible having it a month. I can't go without this machine for that long. That's around when I started having issues and really noticed at 10+ hours. Told them something wasn't right oil was super milky instantly
@DarrenTowner 2 ай бұрын
Well, I gets it's a lot better than engine failure I guess. If you're model does have the recall, I would get it done. If not they'll probably tell you to kick rocks when engine goes. Just my opinion. Wish you the best. Hope our mules are as durable as the older models!
@ParkerMotorWorks 2 ай бұрын
@DarrenTowner yup I think you're right. Haven't gotten anything in the mail yet, fingers crossed
@comporangegt 2 ай бұрын
Fails state inspection, passes Toyota inspection. Come on Toyota, get real.
@JP-eg2rr 2 ай бұрын
I know this was a year ago but what was the drill bit size and the tap
@wastelandkillaforilla302 3 ай бұрын
Your the man
@declangrund7750 3 ай бұрын
Love these videos thank you very much for making them. However part 2 and part 4 freeze and it kinda sucks that we can’t see the rest of the video. Can still hear the audio which is helpful but yeah just thought I’d let you know. Thanks again I really appreciate how In depth these videos are.
@aidanrogers4636 3 ай бұрын
once your engine is turned off, unplug your exhaust back pressure valve sensor, trust me your turbo will build a lot more boost.
@ke6bnl 4 ай бұрын
On my 3010 I put a raised 2in hitch. Would help your situation
@ke6bnl 4 ай бұрын
How hard was it to get the bolt off top of the shock?
@ParkerMotorWorks 3 ай бұрын
The rear shocks were a breeze te remove the front was easy off and not horrible going back on but definitely tricky at first
@ke6bnl 3 ай бұрын
@@ParkerMotorWorks finally did the front and I removed the front storage tray and the bolts were easy to get to job went well, thanks
@BrandisFarm 4 ай бұрын
Seeing videos like this explains why your mule looks and runs like it does.
@miketracy9571 4 ай бұрын
Thanks
@2035jim 4 ай бұрын
Mines got the same problem the damn bed looks like it’s gonna fall off every bump I hit making brackets made no difference what so ever I’ll have to try this
@jefferyboring4410 4 ай бұрын
I have a 2010 with 2400 hrs it’s rough had some issues but it’s going and running
@jefferyboring4410 4 ай бұрын
He just needs a mini truck. He want a lot more than this thing is!😅
@mh-wy9jy 4 ай бұрын
Is this thing still running?
@ParkerMotorWorks 4 ай бұрын
Sure is. At around 100 hours it stopped being a problem child and has been great ever since. Currently only at 150 hours ish
@happycamper2877 5 ай бұрын
Very nice cat,I have the same one in awesome shape,use it regularly, I have had it for 30 years and its one of the most reliable machines on the property...enjoy
@ClintMcDonald-k2z 5 ай бұрын
What was the noise??
@ParkerMotorWorks 5 ай бұрын
Dented skid plate rubbing on driveshaft
@ultragunnervb 6 ай бұрын
How was the rear lift install? Did you need to bring a bit of the shocks like the high lifter instructions say?
@ParkerMotorWorks 6 ай бұрын
I didn't even instal the rear shocks. Even with that spacer plate highlifter send the shock isn't long enough. You would be able to compress but if the side by side lifted off the ground you would not have any extention travel left
@StarknightMT_official 6 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Camo Seat Cover for your Kawasaki 4010 Diesel 2009-2013/ SE 2016-2022
@MrFerrill 6 ай бұрын
I've heard that those engines run cool and have condensation issues when you don't run them long enough to heat oil to the where it'll evaporate the condensation moisture, I had one about 5 years old with only about 50 hours that looked like that so it made sense
@bobbyborders330 6 ай бұрын
Parker mobile mechanic myself. Love your videos man. I do have a question related to the 6.4 what bolt comes in from up pipes in the middle? I had the same issue and was missing a bolt when i looked
@ParkerMotorWorks 6 ай бұрын
I want to say it was a shorter bolt but I honestly don't remember now
@TheCodeOfChrist 6 ай бұрын
How much did you charge the guy for this job? Or what would this job cost?
@bobsopinions 6 ай бұрын
Screech may be exhaust leak. Do you have broken manifold bolts in the back? I took out my manifold and pulled the 2 back broken bolts. In the process of putting everything back together.
@tx9chris8 6 ай бұрын
harbor freight is cheap bc there quality sucks i had a breaker bar crack and i bought it brand new
@ParkerMotorWorks 6 ай бұрын
For sure lower quality on a lot of there stuff
@GeneGriffin-s7t 7 ай бұрын
Thats a good engine. It's a simple twin v.
@GeneGriffin-s7t 7 ай бұрын
Get a compression check. Does the water jacket circulate through the heads.. if the head gasket is leaking should show in a compression check.
@armedfarm3429 7 ай бұрын
Looks like something that would be built in Russia! LMAO.
@robert_blackmon_fishon 7 ай бұрын
I have seen that milky look in the oil when you use full synthetic oil.
@Mark_Tschetter 8 ай бұрын
Can this version of forscan do a cylinder contribution/balance test on the 6.4?
@ParkerMotorWorks 8 ай бұрын
Yes you can do contributions and I'm pretty sure you're able to open a graph aswell
@JimLambier 16 күн бұрын
This is something that I'm looking for. Did you discover how to access the test?
@Mark_Tschetter 16 күн бұрын
@@JimLambier yes this is able to do a contribution test on all 8 cylinders at once on a graph.
@John-Adams-Can 8 ай бұрын
Fluid film is $40/gal??? Its $20/can in Canada. Expensive but effective.
@ParkerMotorWorks 8 ай бұрын
Sure is. Not sure on the current price probably even more now
@Robert-b7p4r 8 ай бұрын
What's the sense of making videos ,all you do is talk.
@carlburdick4978 8 ай бұрын
Your track tensioner is on the front idler
@ihdieselman 9 ай бұрын
That happened to a couple of trucks including mine back in 08 when we had the switch to ulsd. Mine was the worst with the tip splitting like that and ruining a piston. I was able to hone the cylinder and install a new piston and bearing on that rod. Still running strong today. Ive heard it is caused by water in the fuel.
@ParkerMotorWorks 9 ай бұрын
Yup a little bit of water and you can have a bad day. Older ones took water contamination better than new trucks. If new trucks get any water mix it'll wipe the hpfp, fuel rail, injectors, and then into the motor. Water is no bueno
@CareyLeavins 9 ай бұрын
My 6.4 2010 is leaking oil somewhere on back upper side of the motor and a lot of white smoke and oil coming out if tail pipe. Loss of power and almost no psi reading from the turbo. Any ideas?
@mastermechanicfelipe4641 4 ай бұрын
Did you figure it out?
@ParkerMotorWorks 4 ай бұрын
@mastermechanicfelipe4641 it was a cracked drivers side up pipe
@mastermechanicfelipe4641 4 ай бұрын
@@ParkerMotorWorks so where did the oil come from?
@mastermechanicfelipe4641 4 ай бұрын
@@ParkerMotorWorks I appreciate you answering
@ParkerMotorWorks 4 ай бұрын
I'm not sure about the guy in the original comment but I'd guess turbo seals were letting oil by
@chancemccabe8036 9 ай бұрын
Where can i find that blade set up for the 450e i already have
@ParkerMotorWorks 9 ай бұрын
Not sure. The i model is much newer than mine. I'm not even sure if they still make 2 way blades
@whitepinebisoninc.8612 9 ай бұрын
The drain for the hydraulic tank is on either side of the hoe. Drain in the frame underneath, by the step on the left and exact spot on the right side bottom. 3/4 inch drive. I just found mine. Open the tank up first, let the air out, or you'll be splashed with hydraulic oil. Hydraulic fliter is a 2 inch socket to get off.
@jameskeith67 9 ай бұрын
I had to move my tail lights to just inside the rear tires, because when I raised the dump bed the lights would hit the tires.
@ParkerMotorWorks 9 ай бұрын
Interesting I haven't noticed yet. But I want backup lights for sure
@ca724 9 ай бұрын
You can use this as a spare tire as well?
@ParkerMotorWorks 9 ай бұрын
Yup just would need to buy a 5th one
@wiljokorpela8570 9 ай бұрын
You should only use clutch when changing gears. 1-4, you do not need to use clutch to go forwards and backwards
@mitchmitchell4915 9 ай бұрын
Looks nice. Much improved. How’s it running?
@ParkerMotorWorks 9 ай бұрын
The machine is perfect now. No clearance issues. Great in mud snow and does fine on ice. The machine still runs perfectly fine but the motor leaves much to be desired. Power isn't incredible and I can't even see how much oil it has. Motor has so much blow by its pushing fluid anywhere it can. Fluids dripping out of the oil filter now and still is pushing up the dip stick tube. The tube has so much fluid in it it mucks up the oil and the whole dipstick has oil on it
@alienf16 9 ай бұрын
Put the heater in the front compartment. Use a boat engine compartment vent blower and cut holes in the hood behind the glass and add heater vents and defroster vents.
@ParkerMotorWorks 9 ай бұрын
That's a minty fresh idea
@omahacampsite8974 9 ай бұрын
I have same model and they told me it was just condensation too. 235 hours now in meter and engine is smoking. Kawasaki is lying Lying somewhere!!! Angry me !
@ParkerMotorWorks 9 ай бұрын
Yup now mine at 80 hours is dripping brown watery fluid (not like oil) from the air filter
@tengzturiagaiii3185 10 ай бұрын
Hi, how thick was the new floor?
@ParkerMotorWorks 10 ай бұрын
1/8th steel
@tengzturiagaiii3185 10 ай бұрын
Thank you
@peleirur 10 ай бұрын
Blow by brotha. Rings on your pistons are toast and you probably have a glazed cylinder. The brown looks like you've got a blown head gasket
@ParkerMotorWorks 10 ай бұрын
It used to be white now the fluid is brown. I've just never seen blow by throw oil like that but also my first sxs. Bummer being only 76 hours
@brenttucker8685 10 ай бұрын
It’s called blow by. One of your pistons is broken.
@ParkerMotorWorks 10 ай бұрын
Wasn't expecting that on this machine only 76 hours lol
@Jhovan33 10 ай бұрын
I would switch brands of oil and check it again in 4-5 hours.
@ParkerMotorWorks 10 ай бұрын
I switched from amsoil 1040 to Napa 1030 or 530 I can't remember which for the winter time. But I haven't checked the cap yet
@Jhovan33 10 ай бұрын
@@ParkerMotorWorks A bad batch of oil can give you a bad day. Some history of how long the utv sat unused may shed more light.
@ParkerMotorWorks 10 ай бұрын
It's a brand new machine
@robert_blackmon_fishon 10 ай бұрын
That white stuff you are seeing by the oil spout could be from using synthetic oil. I have seen this before on trucks.
@ParkerMotorWorks 10 ай бұрын
Really that's interesting I've never heard of that but maybe I'll try another oil and see what happens
@KevinCorapi 10 ай бұрын
Can you do this if its been tuned?
@ParkerMotorWorks 10 ай бұрын
Yes