Thank you so much for this! Followed your instructions and saved myself god knows how much money 😂

DOPE BEAT. Great video. Thanx.

Pls my tv freezes on it own How can I repair it The model LT-3248ADT2S2

Which temperature has the solder pen while in use? I usually have it on 355 degrees celsius for cables but ‘m afraid may be too high for components?

I want this drilling machine, how much is it

After replacing the y16 board on my Panasonic th - 42 pz 77u I now have audio that cuts off for two or three seconds about every 20 or 30 minutes

Helpful, but you need a closer shot of removing the standoffs. It's impossible to tell what you're doing to remove them. We broke the standoffs trying to get them out.

I have this system we purchased from Costco maybe 3 or 4 years ago. I just popped the grill off to look at the woofer and it was very difficult. Ended up slightly damaging the grill. The woofer was a good looking poly cone with rubber surround and fairly big magnet. I am replacing the 3" woofers in the speakers because I cannot stand the raspy sound of paper cones (I have this issue with the NHT Super Micro Zeros & Kanto YU4s so they sit unused atm). I am replacing them with the $25 ea Parts Express Dayton Audio DW3-12053SC with neodymium magnet. It is kind of ridiculous to spend $65 (shipping + tax) to replace (2) little woofers from a 2.1 speaker system we got on sale for $99 a few years ago but sound is important to me. I also cut the wires to the woofer and used some wire nuts to attach some 16/2 speaker wire out the port to power a spare Infinity Reference 1062W 10" 1.25 cu foot vented box we custom made to fit the trunk of a car in the spare tire area. We no longer have the car and I have been using the subwoofer as my under desk foot rest for years. We already have (2) 12" Infinity Reference subwoofers in vented boxes we made (4+ cu foot each box tuned to 19hz) powered by a Crown XLS1002 for serious listening. -Sony STRDH-790 -(2) Kef Q100's on the wall connected to speaker output A -(2) B&W M1Bs on my desk connected to speaker output B For regular listening and keeping the system off I use this Klipsch 2.1 system. When I want to really hear something I fire up the Sony & B&Ws & the dual 12s. Anyway thanks for uploading this video. It helped me know what to expect in disassembly.

Nanocell?? 886pb

This is simple but helps a frickin lot. Thank you.

Hi Jimmy, great video, my question is: do I need to do anything with software /flashing after switch the main motherboard? (Sony XBR65 65x900F. Thanks

Everything was going fine til I cracked my screen and realized I ordered the wrong lights. Hopefully I can finish this up Monday and the crack will do for now since it was a free tv from someone else.

The black portion of my ribbon connecter got broken ,what can I do to fix it ? Or can I get a new ribbon connecters ?? Please help 🙏

Thanks 👍

so how do you replace the actual led strip

Thanks to this guide just fixed my shark vacuum after 3 hours. I actually dismantled the whole thing. And took out belt cleaned it as I didn't have a new one. Plus undid the roller brush got that out and found clumps of dust stuck between roller and bracket. Tried to figure out how to put whole thing back together after cleaning it. And wallah the roller brush spins now. 😅. So of ur having same problem maybe it's nothing to to do with belt or connection pins too handle it just could be build up of dirt between roller and brackets. Saved me buying a new vacuum.

I dont understand why the tv manufacturers dont sell tv panels ? If they market a tv for sell for $500 in the market i dont see why not sell panels only for $250 as customer parts support. This is not making any sense. I have very beautiful tv its TCL 75r635 the screen turned dark bluiesh very faint bluiesh, i can see the backlight turns very bright behind the tv i did my own diagnosis and traced the problem and there is nothing i can do because its bad panel but i dont think its the panel it self i strongly think its the something in the long circuits boards attached to the panel that they can not be replaced and thats another problem in the tvs design they could've make those golden yellowish ribbons that comes from the screen to the long boards to be like the tcon style connections insted so repair can be made on it .

Is it ok to remove the white tape beneath the LED strips?

I will let you know if it works

Thanks sir.,

Free TV years ago Hatachi 42HDS69 when it gets warm, or hot it will draw a column on the right hand side of the screen, when I have the back off it will draw a green bar all the way to the right a Orange bar about four columns to the left and a purple column to the left of that. Only happens when the set is warm. Have replaced the main power board years ago. Other than this the tv works fine.

I need a tcon board for 42LE5300 but I can't find one. Please help? Back light and sound but no picture

Great video. I have to replace the back light strips on Sony XBR-65x800G. I am guessing it is very similar to 65X900E. I notice on your tv there are screws to remove to get the front panel off. On the 65X800G there are no screws that I see. Can you tell me with as much detail as possible how to remove the front panel? Thnks!

Went through the whole video got it working noticed the screen was a fraction high,so moved it up a bit and bang the screen cracked...what a dumbnut..these screens are just so fragile.

Do you sell a Marantz remote for a vc8100 dvd player?

I went to test these leds then next thing im waking up on top of the tv and the damn screens cracked now and i got a headache. Happens almost every time i use my electric meter.. have to replace that little fuse inside the meter every time though.. crappy meter.. i select the A for ac voltage and hold one of the probes for a good ground connection, what am i doing wrong? My damn ears itch inside again.. jeez..

You dont need to remove the heatsink.just peel the led strip away with a blade.

Hey so my parents are having an issue with there pioneer plasma tv.. it will not turn on… which part should I replace?

What supplier carries the back lights to repair my TV sir???🤔🦼⚓️🇺🇸

Where can I Order led strips

My older PLASMA LG 50PQ10-UB turns on and off by its self i have checked timers done reset and hard reset but still have problem,sustain board Y and X HAVE BEEN DIS CONNECTED AND STILL TURNS ON OFF AFTER 15 MIN OR SO...center of tv is this the power board and if i diconect it then how willi tell if i cant turn on to see if problem is still there>>>>>

At the end of the day dont buy hisence TVs,its trash.im only watching this because i have free time to to fix it

Show reparing of Qled.,70 d. Also

Very good.. 🎉

Thanks. The instructions worked for my old Sharp 50LB481U .

You make it look so easy. 😌

BEA (SLX2020030647541) for 82BS4K20 my tv was on one day then the screen slowly blacked out . Unplugged it then plugged it back up the standby light comes on. Then I power it up then a couple of seconds go by they power lights go off . Then I have to unplug it again to get it to come back on. Need help plz

Ain’t no way I’m doing this!!!😂😂😂😂

And that folks is why you see the TV out in the trash. Unless you’re a tv repair man and do this on the daily, don’t waste your time

Dynex LCD TV model no. DX-L32-10A. Power supply board, cold side. Out puts: 5v, 12v, 24v. good output, calls for 32v, no output. When plugged in red standby light is constant. Can you offer remedial. MJ in B'dos 🇧🇧 thks. PS. TV has a black screen, no sound.😊

The best way that you cutted reflector along LEDes

I'm putting my TV in the basement for a later date, when I feel brave enough to do this

I have a Samsung model PN51D450A2D and my problem is, I have some vertical lines in the middle of the screen, I still have a great picture, how can I get rid of them, do you have an easy fix that can help me. 7:12

I have a Samsung UA556400 , it’s just booting on and off. I disconnected the the main board from power board and it stopped rebooting. I then reconnected and disconnected Tcon from main board and again LEDs stayed on no rebooting . I then reconnected and disconnected both ribbon cables from screen to TCon and it was rebooting. Is this a faulty Tcon or Sofware corrupted

Nice content w man

Should have read all the comments first...absolutely wild that a tech repair channel would miss, probably, the most important step of removing the driver boards as to not damage the gold ribbons. I slightly cut one on accident trying to separate the adhesive from the panel (also explained poorly). Screen works again but the color is now a little off and it has lines that make it look like an old tube TV. Pretty disappointing the comments were more informative than the video itself....

JT-32005ANS22GAM that's the model number I disassembled to check the backlights which was the problem.my question is what do I look for when buying replacements?

My boards don't look like the one's in your demonstration. I have Vizio model number E70-E3.

Yes, but you didn't disconnect and reconnect the wifi antenna. That is the information I was looking for.

Hi, i have a question. I have a Samsung 40inch (Model: LA40B532P7VXXA). It just shuts down randomly. Sometimes it will stay on for 10 or 15 minutes before it shuts down, other times it might just be a few seconds. Every time, just before it shuts down, the screen will become a little brighter, and then it shuts down. I have opened the back and found the ground screws on both the power supply and main board to be a bit loose. Tightened it up, still the same issue. I also unplugged everything from the power supply, and it still does the same. Capasitors all looks good visually, and there is no other obvious damage that i can see. Any suggestions?