How is the bush called at 34:48? This one off mine is torn and will be good to replace soon
@londreseeu5626 күн бұрын
Thank you for the video mate. I m going to replace a broken windows at the same side and it was really helpful. One idea: I think you could use the mechanism itself to help seat down, pushing the glass to the top of the window. Just an idea. I will post the video on my channel as well. Thank you very much again.
@bumbleshufflesdiy59086 күн бұрын
Yes good idea let us know if that works. Il watch you video when you upload it. Thanks very much for the feedback.
@F2UK12 күн бұрын
It is helpful, thank you.
@bumbleshufflesdiy590812 күн бұрын
Thanks very much for the positive feedback. Much appreciated.
@davebeat16 күн бұрын
11:49 is that clip OEM? Mine never had one. 12:51 The grease there is only needed if you don't take that back cover off. Which is how I assume the previous person changed it. The new filter can be squeezed in, it's really tight, but with a bit of grease on the end it clears the lip. Also worth doing the cabin filters at the same time just because you have to remove them anyways to get to the airfilter.
@bumbleshufflesdiy590816 күн бұрын
I think whoever owned it before me had added that clip so I just kept it up, even tho it probably didn't actually need it.
@ognk1ll3r8519 күн бұрын
Bro can I ask you a question your video has helped me a lot see when I clipped ball joint into new white piece I can still see the ball joint slighty do you still see yours thank
@bumbleshufflesdiy590819 күн бұрын
I think I can slightly see it a little but so long as it doesn't pull out easily and the wipers function normally, then you will likely have nothing to worry about.
@darrenbeck814123 күн бұрын
Do I need to take handbrake off to replace rear discs and pads?
@bumbleshufflesdiy590823 күн бұрын
Yes. As far as i know, you won't be able to remove the disk with the hanbrake on (as the brake shoes will be expanded outwards and pressing against the inside of the top hat part of the disk). Well this is certainly the case on my car.
@brad14623 күн бұрын
Does your suspension drop when you leave the car for a couple of days. I have been fixing mine also. My compressor was knackered because of a leak which causes it to constantly run making it overheat. I have found one leak on the tank and I am just about to replace my rear strut top O rings as they are leaking too. Good luck with your claim. Brad
@bumbleshufflesdiy590823 күн бұрын
Mine hasn't been dropping at all weirdly even when left for quite a few days. How did you detect the tank leak and was it the one in the boot?
@brad14623 күн бұрын
@bumbleshufflesdiy5908 I have running boards fitted and one of the bolts was rubbing on the under body tank. Apparently, it's a known fault.
@brad14623 күн бұрын
@bumbleshufflesdiy5908 if yours doesn't drop but it's detecting a leak, it must be before the suspension struts. Have you checked all the lines for knicks
@bumbleshufflesdiy590823 күн бұрын
@@brad146 funny a few years back when I was installing my running boards I noticed that the middle bracket could easily interfere with the air lines and as a result I cut the bracket short and added some tape around the bolts to make sure it cudnt reach and that there were no sharp edges. All is still good with that on mine but yes I agree that if a person installed running boards and didn't notice the proximity of the air lines to the middle bracket, there could easily be an issue down the road.
@MrVandammages25 күн бұрын
thanks for this one!
@bumbleshufflesdiy590825 күн бұрын
Your welcome and thanks very much for your positive feedback.
@bumbleshufflesdiy590827 күн бұрын
Please like & subscribe if you like the video and would like to see more. Thanks very much for watching.
@Lyndon-x2iАй бұрын
The audio,,,, good video, just the stupid music.
@bumbleshufflesdiy5908Ай бұрын
Ha sorry I had to add that music to cover any music playing in the background through the radio at the time.
@DjTavyАй бұрын
Hi! I think I will remove the 3 top nuts first. Thank you for video and your work! Cheers!
@bumbleshufflesdiy590827 күн бұрын
Yes good idea actually. Hope you sorted it no issues. Thanks very much for your kind feedback.
@miraleserАй бұрын
Отличное видео
@bumbleshufflesdiy590826 күн бұрын
Thanks very much for your feedback 😀
@AngryDad85Ай бұрын
hi mate, great vid, im doing this soon, may ia ask when you take the fuel feed pipes off the injectors was there any fuel leakage at all or pressure when you unscrew these?
@bumbleshufflesdiy5908Ай бұрын
It's been a while since I did this job but I don't think there was any pressure or fuel leakage worth talking about (though I wudnt smoke while doing it)!!
@AngryDad85Ай бұрын
@bumbleshufflesdiy5908 haha nice one I won't be smoking 🤣, great channel mate very informative vids
@kurtfindlay5273Ай бұрын
My wife linkage has gone and now I'm looking to replace it as the garage want to charge an arm and leg.
@bumbleshufflesdiy5908Ай бұрын
DIY all the way and hopefully save yourself a small fortune
@VersaVirgoАй бұрын
This actually helps. Tnx for sharing mate
@bumbleshufflesdiy5908Ай бұрын
Glad it helped. Thanks very much for the positive feedback.
@dvdcrlyАй бұрын
Great video and much appreciated. I bought one of these last night. All has gone well apart from the front brakes. When I attached them back after installing the front wheel they seem to be very tight and not releasing fully when the brake is not being used
@bumbleshufflesdiy5908Ай бұрын
Thanks very much for the positive feedback. I think you can adjust the front brakes via a nut just above the pads (I.e. loosen nut and allow more wire to slide through so the brakes are open a bit more). Hope you get sorted.
@tonic1667Ай бұрын
So click down on right side and up on the left.. just goes to show the MOT testers are scammers, he failed me on handbrake but barely can do 7 clicks up
@bumbleshufflesdiy5908Ай бұрын
I can actually remember now but through trial and error you will identify which direction is loosen and which is tighten. Sometimes though the shoes inside / disc just need to be replaced if the whole thing is worn out. Pain in the backside this style of parking brake.
@bollardboy19812 ай бұрын
Should have been a surgeon!
@bumbleshufflesdiy59082 ай бұрын
I wouldn't fancy being subject to one of my own operations though !!
@makkam482 ай бұрын
Where is the rear wiper fuse located
@bumbleshufflesdiy59082 ай бұрын
Sorry I'm not sure where that fuse is located. Try here maybe: fuseandrelay.com/audi/q7.html
@darranconnor53792 ай бұрын
Ps have you ever had a smell of burning oil in your cab ? It’s only now and again but I am a little concerned.
@bumbleshufflesdiy59082 ай бұрын
I had a lot of issues with that car but I don't ever remember burning oil smells in the cabin. Maybe a leak somewhere and the engine heat burning it off, then the heating system bringing the smell into the cabin?
@darranconnor53792 ай бұрын
Massive help 👍🏻
@bumbleshufflesdiy59082 ай бұрын
Great stuff glad it helped. Thanks very much for the kind feedback.
@richardpeel-k1c2 ай бұрын
Just watched the oil and filter change, on BMW 320i. Well done, good to see excellent engineering practice of cleaning and oil O ring seals and screw threads before re assembly. And not overtightening too! And running engine after to check for any oil leaks.
@bumbleshufflesdiy59082 ай бұрын
Thanks very much for watching my video and for taking the time to leave this kind feedback, it's very much appreciated indeed.
@PacifierHDx2 ай бұрын
I have the exact same issue. Gonna order the part now.
@bumbleshufflesdiy59082 ай бұрын
Wow it must be common then after all. It's definitely a weird one !!
@lukecutting78012 ай бұрын
How come your handle bars slipped straight in mine won't
@bumbleshufflesdiy59082 ай бұрын
Try loosening up the handlebar screw to make a little more room. Maybe on urs it's already tightened up a little too much.
@ItFleeb3 ай бұрын
Do you have to use grease for this or is it not needed
@bumbleshufflesdiy59083 ай бұрын
Hi, I'm not sure if I was supposed to or not but I did not use any grease during this build and I am still using the bicycle regularly for 25k + cycles with no issues.
@ItFleeb3 ай бұрын
@bumbleshufflesdiy5908 ight thanks lad sounds fine just saw a halfords building guide and it used it just didnt know if i needed it or not
@bumbleshufflesdiy59083 ай бұрын
Jeepers maybe it is supposed to have grease applied. No grease came with it so I didn't even know it was supposed to have any grease. Though it's been working grand for two summers lots of use no issue, so maybe it's not super critical !!
@robertwood85573 ай бұрын
Thank you!!
@bumbleshufflesdiy59083 ай бұрын
You're welcome!
@pitokara39334 ай бұрын
Thanks for the upload mate, really useful and straightforward
@bumbleshufflesdiy59084 ай бұрын
Thanks very much for the kind feedback. Glad it helped.
@Quick20044 ай бұрын
Use impact wench on rosebush tool takes 30 seconds 👍 done mine last night
@bumbleshufflesdiy59084 ай бұрын
Thanks for the feedback. Il remember that if there's a next time !!
@danielbryanlhr4 ай бұрын
My car is a 2009 Audi A3 1.8 TFSI 8P1 incase anyone has a similar vehicle.
@bumbleshufflesdiy59082 ай бұрын
Thanks for your comment. Between all our experiences I'm sure it all comes together to help others (well hopefully anyway).
@danielbryanlhr4 ай бұрын
Great video. I've just cleaned my faulty unit... I soaked it for 24hrs in a combination of WD-40, bleach, washing up liquid and water, and then used a small wire brush (size of a toothbrush). When I replaced it at first it didn't work, but I realised that I had done the screws that hold the motor to the unit way too tight. Those two metal inserts that the screws go into were a nightmare for me but after loosening them slightly it worked fine. I didn't bother using grease to lubricant the internals tho.... Also (because I skipped some of your video) I'm not sure if you noticed that there's a rubber O ring that goes on the spindle that protrudes through the window which the windscreen wiper attaches to. That little rubber o ring is what 'should' stop the water seeping into the unit but it doesn't. One problem I have now is that my cleaned unit is far too powerful... when the water squirts out it travels about 6-8 feet! I have to make sure there's no motorcyclists or other cars around when I want to clear my rear window because it could put out 🔥 it's so powerful! Thanks for the video it helped me to put it all back together really easily! Oh, in order to get the trim off my boot, I used one of those 'scrapers' that people use to clear ice from their cars. Because it's slightly curved at the end it worked a treat!!
@bumbleshufflesdiy59084 ай бұрын
Great job glad you got sorted and that you've now got a powerhose!! Thanks very much for the positive feedback. Update after time to let us all know if your fix is long lasting.
@33gall4 ай бұрын
I need to do this job myself, it’ll come in very handy when I get round to fitting a new one. Good local info too lol, I’m in Belfast….followed
@bumbleshufflesdiy59084 ай бұрын
Thanks very much I appreciate that. Good luck with the job, I'm sure will work out grand!!
@33gall4 ай бұрын
@@bumbleshufflesdiy5908 easier than getting a complete door from the scrap yard, that's what the Mrs told me to do 😆
@bumbleshufflesdiy59084 ай бұрын
Hell yeah much easier. Actually the cheap regulators are ok in my opinion. I have had them not quite fit 100% in the past but they work fine and when the car is getting on a bit, that's good enough for me.
@33gall4 ай бұрын
@bumbleshufflesdiy5908 I specialise more in MK1 TT's but your video definitely comes in handy to give me an idea what to expect. Only got the Q7 last month and only replaced a speed sensor and dpf sensor so far lol
@bumbleshufflesdiy59084 ай бұрын
@33gall haha may be a few more replacements ahead in that case (great car tho all the same). Some other repairs I've done on Q7 are also on the chanel, including air suspension / compressor etc which was a huge saving doing as DIY.
@kevinclark28565 ай бұрын
I DONE OIL CHANGE ON MY N43 HALF HOUR LATTER HAD A FUCKING ROD KNOCK NO ITS FUCKED SHOULD LEFT IT ALONE WAS MINT BEFORE HAND N43 ENGINE AS NIGHTMEARS AND BMW NEW THAT FROM THE START
@bumbleshufflesdiy59085 ай бұрын
Oh no that's terrible news. I was always afraid of the engine on mine giving up (timing chain guides / oil pressure etc) and that's partly why I got rid of it as I viewed it as a ticking time bomb. What's your next move with yours?
@barbarakerr94205 ай бұрын
I wish you could sort my car out. My idiot husband and his mate are always at it
@bumbleshufflesdiy59085 ай бұрын
Sounds like two pretty awesome guys !!
@paulgrowcott47825 ай бұрын
This looks easier than messing with the sump plug. How do I know how much oil goes in?
@bumbleshufflesdiy59085 ай бұрын
Hi Paul. Thank you very much for your comment. Yes we agree there is no risk of stripping the sump plug this means. We used castrol oil selector (or the cars manual) to identify the fill capacity and also pay attention to how much oil we extracted.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone (and my apologies for the audio - I will try to improve in future videos). If you liked the video please consider subscribing to help me build the chanel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone (and my apologies for the audio - I will try to improve in future videos). If you liked the video please consider subscribing to help me build the chanel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.
@bumbleshufflesdiy59085 ай бұрын
Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.