How’s this bad boy holding up?

Thanks for the install video! Currently in the market for a Gladiator, and this opens up my purchase options a bit more. Does it retain use of the same key fob as well? I assume the reprogramming resets that as well.

Hey there！Your content is fantastic! We have some car related items. Do you accept sponsored products?

Honestly I don't understand the hype on these. I personally don't think they look better than the stock LEDs. Maybe better than the stock Halogens. But to each their own. Nice rig otherwise.

Did this this past weekend but made my own USB and USB-C port plate - thanks for the idea! This helps less wires hanging around when I already have my ICOM radio faceplate mounted up there among other things- this was an awesome mod I wouldn’t have thought of without seeing your how-to! TY🙏👍

For those who wonder if it would work on the 2024 4xe - Works. Thanks for the video.

The TITLE should have been WHY We need an OCC.

Thank you for the instructions, good video. I want to invest in this setup for my JL

Put those on mine and really love the look of them. I turned on the light show with the Tazer. It’s awesome

I was planning to get the one which is not required to disassemble the center console but it doesn't look nice as this one. After watching this video I have the confidence to do it myself. Thanks man.

Do you oil this filter?

So this won’t work unless you have that type of grill? I bought my jeep where the previous owner replaced the grill with one of those angry face looking headlight grills.

Probably just as easy to pull the fuse box. That would take way longer than 10 minutes lol. Jacking up the jeep and removing tire is over 10 minutes.

Very good Video. I also purchased Optima batteries and took advantage of the military discount, (11-B). I bought one for my 2019 JLUR 3.6, and one for my wife's mustang. I have replaced both OEM batteries in the Jeep once, and then they died. So AGAIN, I replaced both of them, but this time I decided to go with after market batteries instead of MOPAR. Nope, didn't make any difference! They became ESS casualties in about two years. That made 2 times I had become a victim of Jeeps bad battery concept, but eventually I still experienced issues with that auxiliary battery, and the annoying messages in the dash about Start/Stop. I got tired of the whole concept of marrying different capacity batteries to each other in parallel. I can't think of any situation where I use two different sized batteries in one device? Not in my flashlight, they're all D-Cells, not in my Remote controls, nope, all AA or AAA. Never mixed. I never liked the ESS, but I do enjoy the Avenger symbol button that Jeep chose for the button. Now I've removed both batteries from the engine bay area, and relocated my battery to the interior of the Jeep. I live in South Florida. It gets toasty down here! I ran 00 gauge pure oxygen free copper welding cables from the engine bay to the cargo storage area, and I bought this excellent battery box to store the new battery in and secured it with nice tie-downs in the cargo area. www.amazon.com/gp/product/B097245WV6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I also added a nice in-line ANL fuse holder to ensure that I had a safe fusible link on the positive cable. Also used heat shrink with the copper end connectors to make it proper like and professional. www.amazon.com/dp/B00P0ZLZUE?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Now my battery doesn't get exposed to the extreme temperatures of the engine bay, and I don't have to deal with ESS issues anymore.

I just did this following your video. Thanks so much!

Why didn't i see you fighting the aux battery on the re install. Everyone skups that step

Really great video man. Thanks!

Great vid. Thanks. Gunna do my 2001 JL.

Hi, I like your content. Do you accept sponsored products?

Is there a part number or link for the plastic blanks that need to be installed and cut?

What kind of wire did you use to extend the USB through dash?

HEY SHIPMATE, HOW IS IT HOLDING UP? IS THAT TIRE A 35"? ANY SAG OR DID YOU HAVE TO DO ANY READJUSTMENT? I AM REALLY STRUGGLING WITH THROWING DONE $1200 BUT I HAVE TO UPGRADE MY JL JUST WENT TO A DIFFERENT SIZED WHEEL AND TIRE ...

I did the same with my Willy's and it didn't work 😢

Perfect! Save me time with my install. TY!

Thank you for making this. I want these lights and want to install them exactly the same way. Only thing holding me up now is figuring out how to get them to blink instead of of chase on the turn signal

Looks good I have a JT looking to put in that arb system also I see now I’m going to need that to ty keep them coming

Thanks so much for this video! This is a nice upgrade for my 2022 4XE Rubicon. Awesome tutorial, without your vid I would have been lost since the part contained no install instructions. Worst part was putting the AC panel off and hoping nothing broke. Thanks again!

What blows my mind is why Jeep keeps undoing things like this? Even the leaking issue up front, or where the hard top sit to the frame, why didn’t they think “hey it might leak, I think we need to design it better.”

Great vid. Couldn't have done it without you

Nice, I was looking for a video like this. My Willys has the all plastic fenders, I'm assuming I can do the same and just dremmel off the excess plastic?

Should of back that jam nut back out till it hit that lock ring

Does anyone know the name for the clips for the replacement liners? Mine broke off when trying to put them back together

Future tip pop it into 4hi and the collar will lock on the inner shaft and you can remove the passenger side just like the driver no need to touch fad at all!

How many ports could you use to tap into the 12v cigarette outlet? I have one outlet and if its safe id like to put maybe 3 or 4 ports in my vehicle.

Doesn't this make the seats sit higher when you lay it down

Big waste of money, nothing but problems!

How is it holding up? Any scratches or noises?

I think i saw your other video for innovative at product air system, and now you change to kraken system ? Is there any reason ?

FANTASTIC Step by step! Very helpful for a lot of different reasons. I just needed to hide wires for an amateur radio. But now...the sky is the limit. Thank you very much. - liked and subbed.

Thank you so much for this video! I just installed the cup holder in my wife's Jeep. It was a pain but I don't think I could have done it without your video.

If you use the wiring inside can use that color under the hood?

Dumb question but which pin waterproof connector do I need? Amazon shows 1, 2, 3, and 4 pin.

Which brand ball joint press did you use in the video?

Good tutorial. Thanks. Only thing- the lack of what ever dropped out when axle was pulled, do you put that piece in during the axle entry or after the axle is mounted on the knuckle? Then insert the piece for the fork? You mentioned something about not being aligned on disassembly, something needs to be aligned on axle entry? The fork unit need new seal or gasket? This ball joints priced at $600, is it worth the price compared to Synergy hd joints? $300. Anti seize would be us3d because of dissimilar metal contact?

Awesome video after you did the passenger side did you add oil back ? Because I noticed it leaked out after you took it out

Are they made in USA?

What stroke were you using? 8 inch or 10 1/2 inch stroke

Misleading title.

Outstanding job on making this vid. Details and step by step are much appreciated. I’ll be doing this when my parts arrive this weekend, but I went with the mevotech TTX ball joints for my diesel JL. Factory Dana ball joints are total crap. I stripped out the thread on one overtightening to stop the clicking on turns. And can’t thank you enough for listing the tool list. Just ordered that weighted hammer 💪🏽.

Amazon link not working for the ARB wire harness. Can you repost link? Thank you