PF 4X4

Пікірлер

@jimclements6729 17 күн бұрын

You mentioned frost -- on a warm summer day, an object transitioning from cold to warm will condensate, just like a bottle of Coke. Once everything is out back together, the moisture would be trapped in the hub cavity. Should I be concerned with extra moisture in/on/around the race?

@kingston4408 25 күн бұрын

I just use two pieces of cardboard

@lukebarron4175 28 күн бұрын

Learned something new. Thanks for posting this. It looks like the Jemez out there :)

@ReisterJP Ай бұрын

I been doing it wrong since 2001!

@markwalker2307 Ай бұрын

Why not remove the wheel and the mud skirt first ? Way more room !

@aaronjohn6586 3 ай бұрын

Great hack, thanks!

@ClearWater7.62 3 ай бұрын

In your video it looks that caster affects toe.. the toe in, on my 97 t100 is maxed and too much negative caster might be the culprit. Thanks for explaining @2:00 min point

@murphytoadster9864 5 ай бұрын

Me and my dad would adjust, then back out and oull back in and check again

@mohawg6635 6 ай бұрын

Excellent video!

@thatonescrambler 6 ай бұрын

Calling an XJ a cream puff is adorable lol

@jamesnewkirk1426 6 ай бұрын

Great video Thanks!

@jeffsoetmelk3566 7 ай бұрын

Great video. (but 64 ³/⁴ to 64 ¹⁵/¹⁶ is 3/16 NOT 1/16 difference)

@rlachermeier 7 ай бұрын

One of the best explanations on how and why to measure caster angle. Thanks

@MattyPastaNYC 7 ай бұрын

This just made me make sure my AAA was renewed. Thank you. I was about to tow it to my mechanic 😩 thanks!!

@lowellyowell2922 9 ай бұрын

I believe you didn't say when doing This is your frame should be level side by side before adjusting camber Casper.

@stevegallegos2441 9 ай бұрын

3/4”=12/16. Did you mean 13/16” when you said a smidge past 3/4”?

@Paul-ri8vc 10 ай бұрын

Awesome video! I use sheet metal and grease/oil for turn tables

@sinks88 11 ай бұрын

there has to be some kink of hack to not spill damn oil everywhere tho!

@robertmccully2792 11 ай бұрын

You can use the angel finder in your smartphone also.

@MrTouge240 Жыл бұрын

After watching tons of videos this is absolutely the most informative not only on how to measure caster effectively and why it is measured that way but also how to adjust it and how that affects things like camber. I was in the market for a Quick Trick Alignment Tool which I may still get just because I think it's a cool tool and could help but I just wanted to say thank you to such an informative video.

@markschuyler3768 Жыл бұрын

Best video out of dozens on the subject! Thank you!

@Arlind86 Жыл бұрын

Why multiply x 2? Another video said multiply x 1.5 This is confusing

@daviscommercialfinance6170 Жыл бұрын

Dude, you just saved me, a lot of work!

@MC-jf6ic Жыл бұрын

How is it to drive without sway bar mate?

@0713pnguyen Жыл бұрын

Watched dozens of videos on alignments. By far, this was the most informative and practical video. Your explanation of how to estimate caster is superb!

@mr_mnky Жыл бұрын

great vid, but (possibly dumb) question: how can you make sure that the tires are pointing straight-ahead when doing the toe adjustment?

@pathfinders4x477 Жыл бұрын

It will all self center when it's driven... but then you might need to straighten the steering wheel.

@NicholasRiviera-Dr Жыл бұрын

Not a dumb question, actually very important and should be considered the first step when doing toe adjustments. Steering wheel must be centred first. Depending on your car you could use the steering rack or pitman arm to ensure they are dead centre first.

@jawadrishijk Жыл бұрын

Good Infarmation sir I am Pakistan💯💗

@RandomStuff-cx9lv Жыл бұрын

Very handy tip! Thanks! I was trying to figure out how to adjust strap length and your video was what I needed. However, when using a wide strap with large force, the loop end seems to be quite wide and using towels rolled up, I find it slips and strap works it’s way to the tree, any tricks to stop it from slipping with heavy weight?

@pathfinders4x477 Жыл бұрын

Thanks. You'll need to increase the diameter of the "dog bone". Maybe find a tree limb or scrap 2x4 and wrap a towel around that. Get creative. When you've got it right, it locks in.

@RandomStuff-cx9lv Жыл бұрын

Thanks! I’ll give that a try

@mitchshort8020 Жыл бұрын

What a crock of shit, try putting your bs in an actual situation. You did nothing but talk. Your vehicle needed no adjustments please let's see you talk one that's screwed and get it back in order. Good luck

@NicholasRiviera-Dr Жыл бұрын

The title of the video is how to measure - nothing about adjustments

@txsurfnturf Жыл бұрын

Could it also be done by jacking up the front end, tires off, with the jacks placed under the lower control arm to simulate load, while making sure vehicle is level? (Just looking to create more work space.)

@ginge3381 Жыл бұрын

when measuring the caster do you have your straight edge pium or to centre points of upper and lower ball joints?

@roy-whereamI Жыл бұрын

Thanks for this, I learned a lot.

@AceAgallah Жыл бұрын

AWESOME THANKS!!

@arvindpuryag8515 Жыл бұрын

Beautiful truck man❤

@aircomp Жыл бұрын

Great video! Have you checked your measurements against a trusted alignment shop's measurements to test the accuracy? Hey, yours might be better actually. Lol.

@scottdowney4318 Жыл бұрын

Better to use digital angle finder. I found the Samsung phone is slightly off by about half a degree, and for phone measuring to 90 degrees it just can not quite get there, as in it is inaccurate and works better when measuring less angle. The analog round meter I have is also off by 1 degree, that is a very rough measurement tool. I calibrated the angle finder using a 4 foot spirit level set to dead perfect level. You want camber measurement to get as accurate as possible. Having the whole car level is extremely important. My choice for level tools is a spirit level or a digital angle finder well calibrated.

@flintcoat2596 Жыл бұрын

Great video! Your idea with the plastic bags and oil is absolutely ingenious!

@outcast7899 Жыл бұрын

Someone suggested to use two linolium floor tiles with a little grease sandwiched between, probably works same as plastic bags and oil, my concern is, i need my mercedes up on stack of 2x12s to get under it and my driveway is is not level. It may slide off the blocks. Any suggestions M L Rogers Pasadena,Tx