sReed

Пікірлер

@VaLLenTIN__ Күн бұрын

what exaust is that whats the muffler

@sreed_ 2 сағат бұрын

No muffler - magniflow resonator

@EFreeman1970 2 күн бұрын

Fine (red bag) Black Diamond Coal Slag from Tractor Supply. 50lbs for $12.99…so worth it.

@sreed_ 2 сағат бұрын

Sweet thanks I will try that out

@TheBlaert 7 күн бұрын

Have done a few front subframes on B5.5 Passats. Have always used poly bushes though. The roads where I live are probably too rough for aluminium ones. The tool to remove the bushes is easy to make and is a lot easier than trying to cut them out.

@sreed_ 6 күн бұрын

Sweet, I’m thinking with western PA roads I may do the same. I’ll have to check out the tool thanks!

@williamlawrence2525 11 күн бұрын

Did you do all 4 breaks

@sreed_ 11 күн бұрын

Yes

@Mayohihu 12 күн бұрын

good video bro & clean car!!

@sreed_ 12 күн бұрын

Appreciate that!

@michaln5540 13 күн бұрын

Hi. Do you have a list of parts that you used for a manual swap?

@sreed_ 13 күн бұрын

audis4parts.com/product/audi-b6-a4-s4-tip-to-six-speed-01e-swap-kit/

@sreed_ 13 күн бұрын

Very similar to this but you need a6 front axels and you don’t need to change the rear diff

@DeCastroEric 16 күн бұрын

How long did it take for each corner? I replaced all kinds of stuff on my brakes (big brake kit, rear drum conversion to disc and added a manual proportioning valve and I bled for about 10 min per corner and I still have spongy brake.

@sreed_ 16 күн бұрын

It took forever and a few cycles

@DeCastroEric 15 күн бұрын

@ ok maybe I need to bleed much longer. Thanks.

@JefferyBartley 19 күн бұрын

Where can I buy a tune file I got mpps v21 I figured out how to copy and save my file but I don't know how I don't have one to put back on is a 2004 Audi A6 Quattro s line 2.7 l twin turbo automatic I have cat delete

@JefferyBartley 19 күн бұрын

I had a 2004 Audi A6 base6-speed manual which I wrecked into a tree a couple weeks ago but I'm going to be putting a 6-speed manual in sline soon

@sreed_ 16 күн бұрын

I would do a deep search on the forums, the file I uploaded was posted on Audizine

@TheyKilledKenni 20 күн бұрын

Great video man!

@sreed_ 19 күн бұрын

Thanks!

@Nicholascogswell 28 күн бұрын

First reed. Haha

@sreed_ 27 күн бұрын

👍🫡

@BIOSHOCKFOXX Ай бұрын

Everything looks so old and rusted.

@sreed_ Ай бұрын

Yes it was an older car that sat for a while

@PNW-LOOKOUT Ай бұрын

Love the S4 content! Going through the same process right now, and one of the most helpful tools during the teardown process was actually an ultrasonic cleaner a friend let me borrow. It’s large enough to fit the valve covers. Fill it with a diluted mixture of the degreaser/cleaner of your choice and just add parts in as you pull em off. In about 10-20 minutes they come out looking almost new.

@sreed_ Ай бұрын

Awesome tip, I will pick one of these up!

@FrankyNunya Ай бұрын

Needed to put hot water on the dent first

@sreed_ 6 күн бұрын

👍

@drydreams8513 Ай бұрын

I always have trouble with these one man bleeders. Never tried this one before but I have used the hand pump harbor freight one it kinda worked but I ended up doing the two man process ya a pedal pumper and valve opener. I live alone and I don’t like having to bug n beg someone to help me next time I might try this one out seems better than the one i tried from HB and I tried a $20 amazon one it’s sucked let more air in then it pulled out

@niyaski1422 2 ай бұрын

Where can I get this pipe?

@jamesmunster8312 2 ай бұрын

Good job

@sreed_ 2 ай бұрын

Thanks 👍

@craigbennie1 2 ай бұрын

Try heating the dent with hair dryer before the pull.

@Azvikingdesigns 2 ай бұрын

What kind of compressor are you using

@adaptordieai 2 ай бұрын

since 2005, still own an original silver b5s4 6spd sport edition, alcantara interior and stock k03s. For me, it is the perfect all around wolf in sheep's clothing and also super analog, so no e-assists.

@sreed_ 2 ай бұрын

Could not agree more

@shivansamlal667 2 ай бұрын

The muffler is your problem

@glasowaldiaquascaping8685 2 ай бұрын

Sounds good! I have a Hurricane Exhaust sounds nearly the same :D

@C_Bauer 2 ай бұрын

Sounds fire bro 🔥🔥

@sreed_ 2 ай бұрын

Thanks king

@jakel.9819 2 ай бұрын

That is truly the best sounding 1.8t

@Slking507 2 ай бұрын

You have the auto refill plastic insert upside-down.

@SmedleyRudolf-w4k 3 ай бұрын

Lewis Laura Young Barbara Garcia Christopher

@lkfayz 3 ай бұрын

Bro ended the video with a dead engine

@sreed_ 2 ай бұрын

I did not

@RudebwoyRacing 3 ай бұрын

Will this work for a b8 or b8.5 s5 3.0tfsi

@sreed_ 3 ай бұрын

If the file you’re loading is built for that ECU surely

@RudebwoyRacing 3 ай бұрын

@@sreed_ thank you

@Mr24xeven_303 3 ай бұрын

Good afternoon man, i am currently in this same swap, what flywheel/clutch kit did you order to match up your v8 to the 01e? i thought the 2.7 would fit my v8AWN but it doesnt line up.

@sreed_ 3 ай бұрын

Hey there this was the 034 flywheel with the B7 Rs4 clutch and pressure plate

@Mr24xeven_303 3 ай бұрын

@@sreed_ Youre the man i enjoyed watching your videos. tons of knowledge! i have one more question, did you have to use a Crank to flywheel spacer for that set up? a problem i am having is my current AUTO spacer isnt the right size.. as you know the 6speed b5s4 is hard to find as it is, and i think i need a stock spacer off that car. What are your thought? anway have a great day.. i appreciate you responding to me on a old ass video.. lol

@SmedleyRudolf-w4k 3 ай бұрын

Walker Charles Garcia Jennifer Walker Timothy

@thooke222 3 ай бұрын

Dang you're braver than me! Nice project

@xray364 3 ай бұрын

Never going to pull that out with that BIG crown advice the dent. Need to work on that first IMO

@AriesTeresa-i6n 3 ай бұрын

Garcia Mary Gonzalez Mary Garcia Edward

@joshr213 3 ай бұрын

Can it be used to bleed clutch

@sreed_ 3 ай бұрын

I haven’t tried that but I don’t see why not

@flyingfishflftyfifty 3 ай бұрын

Too much talking. Just get to point on how it works. If it did or didn’t.

@sreed_ 3 ай бұрын

Sorry

@tymorris8922 3 ай бұрын

Fr!!

@OrpiAktar-w6j 3 ай бұрын

Lewis Jose Lee Mary Lopez Patricia

@MaDDoxXpK 3 ай бұрын

Hey man, Do you recall which startermotor you used?

@sreed_ 3 ай бұрын

I reused the stock one that was working with the automatic transmission

@FatihCanak-m2i 4 ай бұрын

Miller Frank Martin Deborah Gonzalez Barbara

@WoodrowGibbins 4 ай бұрын

What's dot 4 iv never heard of that iv herd of d.o.t 4 never dot lol

@dannyr3346 4 ай бұрын

50 pound bag of sand at Lowe’s is your best bet

@sreed_ 4 ай бұрын

Good call

@harveypaxton1232 4 ай бұрын

Just make sure you are wearing a good respirator.

@quayquon 12 күн бұрын

@dannyr3346 what type of sand

@dannyr3346 4 ай бұрын

Junk

@filthyphil8354 4 ай бұрын

great video but your lighting was horrible. Very dark .

@sreed_ 4 ай бұрын

Thanks yeah have been having issues with rendering thanks for watching

@sonicweaver 4 ай бұрын

Do your parts in a cardboard box or Rubbermaid type storage container and reuse the media. You can buy larger bags of silica or walnut shells for much less per pound.

@sreed_ 4 ай бұрын

Thanks I will try that out