Thanks for showing that non-intrusive spot for the USB port, I did the same on mine.
@genxjya7 күн бұрын
@burundoyins9583 No probl. I changed to a fast charge usb. Go to 9:13 min mark in this vid... kzbin.info/www/bejne/f4nafIywhpusn8ksi=7RXwu4C8T2Mnwd0o
@cschacker9910 күн бұрын
Awesome video! A lot of people are struggling with fork tube mounts from Quad Lock and Peak Design. Both are designed for round fork tubes, not the hexagonal tubes Kawasaki uses. This seems to be the perfect solution
@genxjya10 күн бұрын
@cschacker99 Works great. Hopefully it's still available.
@louierivera751211 күн бұрын
Great assessment/ demonstration bro 👍🏻👍🏻 Also, what brand of sliders are those on your bike? Do they make ‘em’ for the rear as well?
@genxjya11 күн бұрын
@louierivera7512 It's the Womet Tech Total Protection Package. Here's the video kzbin.info/www/bejne/p6iQpoiseNOkhqcsi=EwIhP0Yfld4F13fp
@genxjya11 күн бұрын
@louierivera7512 If you want something cheaper, search Amazon for DMD or Shogun Frame Slider for Ninja 650. Also, Front Axel Slider (there are also rear axel sliders but u can't install it since Ninja 650 has a pin in the rear axel).
@genxjya11 күн бұрын
@louierivera7512 I traded in my Ninja 650 and have a bunch of extra leftover parts and accessories for it. If u r near NYC area, let me know if u r interested.
@HeYiTzCoLbY14 күн бұрын
awesome video
@genxjya14 күн бұрын
@@HeYiTzCoLbY Thank you...
@EJ-ye7wg18 күн бұрын
This would have so many more views without the question mark. Just say what you traded it in for in the description for more views!!! 🤦♂️
@genxjya18 күн бұрын
I did this since I had another vid picking up the Yamaha MT-07. Anyway, thnx for idea. kzbin.info/www/bejne/fKqalGWZbdx6kJYsi=cfWpf_1jJeiBvKNX
@jneptune154025 күн бұрын
lol. We were there when you were there. You were the guy walking around with the go pro. I was in the lobby when they cut the hole in the ceiling.
@genxjya25 күн бұрын
@jneptune1540 lol, I guess we were lucky. I know another family who went to Hiton Tulum and they had to evacuate...
@jneptune154024 күн бұрын
@@genxjya my kids are loving you videos bc we were there and they saw you.
@genxjya24 күн бұрын
@jneptune1540 glad they like it... my girls don't like it too much... had to edit them out a lot...
@monawoka97Ай бұрын
What mirrors are those? How do you like them?
@genxjyaАй бұрын
MZS Bar End Mirrors: www.amazon.com/dp/B0BG56ZZZC/ref=cm_sw_r_apanp_P1DyyPwDLEU3V Review in my mods video: kzbin.info/www/bejne/mJ2ymJ2gedJ0qK8si=3yFL4iSr2oS6Rngx
@sombathadoАй бұрын
I heard the oil leak problem ! Does it happened to you ?
@genxjyaАй бұрын
No problems for me.
@Plague_Rat778Ай бұрын
Wow... they pay 30% to uber/doordash AND uber/doordash charges up to $4 more. Thats crazy.
@genxjyaАй бұрын
Hell yeah but it is what it is...
@iJuceYouАй бұрын
Is this setup exactly the same as the 2022 ZX6R?
@genxjyaАй бұрын
I'm not sure but if you don't have that dummy hole next to dash then probably don't have the power connector. You would probably need to buy amazon usb that connects to battery directly.
@ozamudio2012Ай бұрын
I see you previous video , I you got a great price for your MT07 , what dealer was that ? I am trying to buy one and also probably getting a good trade price for my Honda Crf 300 rally
@genxjyaАй бұрын
New York Honda Yamaha (718) 784-6200 g.co/kgs/QfFwoQ2
@kitty-oАй бұрын
Thanks for the 2023 update on the 2 Aux ports! (I would certainly have tried the gray one for USB purposes and then would have been disappointed 😂 )
@donaldorivera5255Ай бұрын
Where is the vibration dampener from
@genxjyaАй бұрын
That's the quad lock vibration dampner. You can get it on amazon. Or u can also get aliexpress copies for cheaper.
@predata252Ай бұрын
I'm white Australian and im cheap too... i love having things in common with people xD
@genxjyaАй бұрын
Lol... It's just that some motorcycle stuff are so overpriced. Gotta save $ so I can use it for good stuff like visiting Australia.
@jayilla28Ай бұрын
The stock exhaust sounds better
@arvinsantos2002Ай бұрын
Better fot kawasaki 650s to have longer and thicker exhaust, 450mm like yoshi R77. It sounds more bassy.
@genxjyaАй бұрын
It was just too expensive. Anyway I got an MT-07 now so may get Akrapovic for it.
@cooldad895hess8Ай бұрын
Beautiful bike.
@BlakeSean122 ай бұрын
Can i send you an email or DM you to show you my question? I would really appreciate it. New rider and don’t know what to do!
Hey man! Where did you find that metal cover to go over the forkstem at 4:51 in the video? I have the exact fork stem attahment ball that you are using, but without that metal piece the ball doesnt fit and its loose.
@genxjya2 ай бұрын
Mounts Lab MotoMount Ninja- Kawasaki Ninja Motorcycle for 12mm Hexagon Hole Mount/Fork stem Base Mount with 1inch(25mm) Ball- Compatible with Phone/Camera/GPS Mount(Adapter), black (ML-Ninja01) a.co/d/fQB7noq Is this what ur looking for? All the product links r in the description of video.
@Schnozwangler2 ай бұрын
Same bike, fairing fasteners tend to backout over a few thousand miles, use some blue loctite and its easy enough to take off for oil changes ect just re-apply each time and you’ll be golden
@skylardavis66982 ай бұрын
Did you tune it after you changed exhaust?
@genxjya2 ай бұрын
I didn't. Anyway, had to remove and put oem exhaust when I traded in. If u r near NYC, u can have mine for cheap price.
@TapHelmet2 ай бұрын
What do you do with the second O2 sensor? The A.M. one comes with a single slot for O2 and the original one has two
@genxjya2 ай бұрын
This exhaust is only for US version with 1 O2 sensor. If you already bought it then maybe you can plug the 2nd slot with plug screw that came with exhaust?
@TapHelmet2 ай бұрын
@genxjya it's not that a slot remaining. It's the second sensor (and the wires) that are left hanging, and I'm nervous if it will appear the check engine
@genxjya2 ай бұрын
@@TapHelmet Just unplug the 2nd sensor and see what happens.
@kellyd19103 ай бұрын
I have the 2023 and i now understand why it’s the cheapest in its cc class.
@genxjya3 ай бұрын
Actually it's more expensive otd then similar msrp/cc bikes. Also used prices are much higher than others. For example, I could get Z650 or Ninja650 for minimum $1k less than mt07.
@kellyd19103 ай бұрын
@@genxjya the mentioned are very beginner friendly. I know because my wife has the z650. The gsx750, honda hornet 750, gsx8s are the bikes the mt07 has to compete with.
@genxjya3 ай бұрын
@kellyd1910 I'm gonna put some massive miles on my mt07 so hopefully no more issues. It's awesome ur wife rides. My wife wants no part...
@does_not_matter_91Ай бұрын
I don't think it has anything to do with the price. There's clearly an error in manual, cause they torque spec is way to high for such a small bolt.
@seasparrow74273 ай бұрын
Where did you get the phone holder?
@genxjya3 ай бұрын
kzbin.info/www/bejne/p4ilgn5tjdprfKssi=cPyXUwD0vtzalkGf Here's the vid of phone holder. Product links are in the video description.
@Brabobiker.3 ай бұрын
hi mate, you are absolutely right! i broke the big axle of the rear wheel, while maintaining the torque as the manual said. the numbers are way to high
@genxjya3 ай бұрын
That's crazy. For the rear axel, I used 75 ft lbs instead of 77 ft lbs in the manual. I think yamaha or any manufacturer should always design so there is some protection above or below torque. Especially for common maintenance stuff.
@Brabobiker.3 ай бұрын
@@genxjya exactly! mine was also not on warrenty so i paid full price for the spare parts.
@genxjya3 ай бұрын
@Brabobiker. Hopefully no more issues. Love the bike though...
@bridgettdixon68073 ай бұрын
That traffic is a nightmare.
@genxjya3 ай бұрын
I think that was a good day...
@Ollv333 ай бұрын
it's unfortunate, but 30ft lbs is too much. also, no tech uses a torque wrench on drain bolts. get it snug/hand tight and then 1/4 turn of your ratchet and you're good. applies with any oil drain bolt, cars or bikes.
@genxjya3 ай бұрын
Lesson learned.
@sileniu3 ай бұрын
Yes, i had a MT 09 and tried to mount a crash bar on engine mounting points...and while tightening to the specs the bolt...@#$% the hole and ...voila, Engine mounting screw was gone... Yamaha is having some QC problems . In my city 1 mt 07 crashed at 19 mph and broke in half... i had a accident recently and at 17 mph broke in half ( at the neck)... i have vid and pic if you dont believe me. This new series is bad... Goodluck!
@genxjya3 ай бұрын
Hopefully I don't have any more issues 😅...
@kawi_saki3 ай бұрын
Yes major QC issues. I bought a '24 MT07 3 weeks ago and last week the engine started making a clanking noise along with a serious vibration. Been sitting in the shop for a week now with no answers yet.
@jackmcminn25203 ай бұрын
Beautiful bike
@genxjya3 ай бұрын
Thnx.
@YammiePro3 ай бұрын
Did you change the crush washer?
@genxjya3 ай бұрын
Yes. Used generic one from Amazon. 20 Pack M14 Oil Drain Plug Gaskets Crush Washers Seals Rings Compatible with Hon da Yamaha Triumph Kawasaki Suzuki, Used for Oil Change a.co/d/ezg0x2o
@YammiePro3 ай бұрын
@@genxjya thanks! I’ll be doing my first oil change soon,think I’ll just hand tighten or 15flbs
@genxjya3 ай бұрын
@DscRides577 Good idea. I even saw a post on reddit where the guy cracked it with 20 ft lbs. Tight with hand then maybe 1 or 2 tugs should be good enough. Check the chain - after adjusting I torqued the axel to 75 ft lb (manual says 77). I skipped the Throttle body sync (really unnecessary unless bike is running weird - idle jumping, lots of shaking, etc).
@tormodi59253 ай бұрын
@@YammiePro Hand tightening a drain plug is way to loose. You'd be lucky to apply more than 2-3 ft lbs of torque (or 4-5 Nm by hand (IF you mean by just using your fingers). The correct torque should be used, and if it cracks like in this video there's a serious production error (I did'nt see the full video, just the start). If you hand thighten it, and it comes loose while driving, you get oil all over your back tire and a very possible whipe-out (plus much likely a ruined engine). If in doubt, why not let the dealer take that first service? Because then if, against all odds, this happens when the drain plug is thightened, it's on the warranty. In Europe (where I live at least) the warranty is voided if service program not followed.
@IBlackfire3 ай бұрын
Yeah stealerships suck. On another note. Have you checked out the Puig Touring Windscreen? Revzilla has them.
@genxjya3 ай бұрын
Do u have to tall one or the standard one from puig?
@arefriendselectric49473 ай бұрын
Good idea on garage door remote location. I guess my only concern would be moisture getting into remote. I used gray port for quick shifter. Works fine.
@genxjya3 ай бұрын
I did the door opener with outdoor rated velcro on my previous bikes. I can take it off whenever I need but even if it gets wet, just let it dry out and no issues. I didn't have any velcro this time but will change. Quick shifter is tempting 🤔 but no $ because I had a major issue during my break-in service. Vid coming soon...
@YammiePro3 ай бұрын
I hear ya about the wind pressure, National cycle makes some vstream high windshields I might try this summer,
@genxjya3 ай бұрын
Got 2 Yamaha OEM replicas. They r good quality but doesn't do much with wind. Will check out National Cycle one or maybe get a replica of a Puig.
@stevegaines-vq3bd3 ай бұрын
for my 2022 Blue MT07 i bought the mid size Puig windscreen....I think it's the perfect size for the MT07 I love the bike.....It's hard to go slow...
@genxjya3 ай бұрын
@stevegaines-vq3bd I'm gonna get the replica one from aliexpress. If the quality is bad then I'll get the authentic one. So the puig does give ok wind protection around 80mph?
@stevegaines-vq3bd3 ай бұрын
@@genxjya IMO, most windscreens are too small......Puig sells 3 sizes, The middle size is perfect.....But It is a "naked" bike so going 80 + it's ok but not going to block all the wind.... BUT... It looks cool AF......
@talkaboutitpodcast92673 ай бұрын
Same
@genxjya3 ай бұрын
I traded in for mt07 about 2 weeks ago. Got lots of extra parts if u r near nyc.
@talkaboutitpodcast92673 ай бұрын
I have the same bike
@bboyJ3 ай бұрын
worst plate flipper ever
@genxjya3 ай бұрын
It's called a tail tidy... Thnx for ur input.
@Delerium043 ай бұрын
Woohoo Cp2 hype
@skittlesplzubitch52293 ай бұрын
is it compatible with the ninja 400
@genxjya3 ай бұрын
I don't think so. Check the width of the hole. This will fit if it's 12mm.
@mullenli3 ай бұрын
Got my woodcraft for my MT07 stand with rear slider on .
@genxjya3 ай бұрын
That's a premium stand. My cheap harbor freight stand is too narrow...
@kennethsnguon27743 ай бұрын
The grey port you were asking about is for the quick shifter. You can get an OEM Yamaha Quickshifter for the 23-24 its plug and play
@kennethsnguon27743 ай бұрын
What about the port thats on the side below the seat idk what thats for
@genxjya3 ай бұрын
OK. I see. There is another under the seat? Didn't see that one, I'll check that out.
@jamesbeckwith78023 күн бұрын
Connecting an ecm scanner/ code reader plugs under the seat. Should look into CB racing case savers covers left / right,water pump and water outlet.
@kevinhagberg16483 ай бұрын
I just ordered that wind screen. I hope it deflects a little air when tucked at highway speeds. Also I believe one of those electrical connectors if for the quick shifter. Its suppsed to be plug & play. As for the stock exhaust, I saw a couple videos where people remove the tip cover and drill a few small holes. I have this exact bike & did it myself. I also sprayed the heat shields with high temp black paint to match the bike. I drilled 3 holes & it sounds better and I haven't noticed any issues with how the bike performs/ MPG. kzbin.info/www/bejne/habdd6qKm5ZnsKc
@genxjya3 ай бұрын
You mean the small windshield I have on mine? Does almost nothing but does look good. Your exhaust sounds good but probably not gonna mess with exhaust til warranty is over.
@mariocifuentes63503 ай бұрын
Hi! I have also a MT07 2024, where can I get the bracket for the tail bag?
@genxjya3 ай бұрын
All the links for the products are in the description. Got the rear rack from revzilla.com www.revzilla.com/motorcycle/yamaha-rear-rack-top-case-mount-mt-07-2018-2019
@spawn23483 ай бұрын
Green is my dream colour for bike
@dougmaverick32874 ай бұрын
Love the sound of that super sport that passed you at the 8 Minute mark. You should have got an inline 4 cylinder. They're not going to make them for many more years, and they will always hold their value and probably go up in value. I'm getting a 40th anniversary 2024 ZX-4RR. Nothing beats the exhaust note of a screaming inline 4-cylinder. Enjoy.
@genxjya4 ай бұрын
Ya, that bike was loud... I can't do a straight sport bike. I need an all around. Your bike with the new color scheme gonna look and sound sick!!! Enjoy!
@Modified_f804 ай бұрын
How do you like it compared to the ninja? I'm in the market to purchase one too. I saw you pass by a section near my house so I'm assuming norther NJ? Once I get mine we should hang out. Nice Ride.
@genxjya4 ай бұрын
I'm near Tappan NY. Mine is a 23 and with tax and everything it came out to $9.3k. It's a popular bike so not sure you are gonna get a good deal but definitely avoid the Jersey dealers!!! Let me know when you get yours and we could ride.
@Modified_f804 ай бұрын
@genxjya looking for several options. New to the riding community, was extremely active in the car community but now I wanted to change things up a bit. Thank you for replying. Love the vids. Learning a lot from you
@genxjya4 ай бұрын
@GroupFI For first bike, try to keep it around 350lb and make sure u can flat foot it. Ninja 400, R3, MT03 would be good choices. Personally, I wouldn't recommend MT-07 as a first bike.
@jerimiah_y4 ай бұрын
Blue Loctite.
@genxjya4 ай бұрын
Not necessary since there are no threads on the motorcycle stem.
@jerimiah_y4 ай бұрын
@@genxjya If not thread lock then the brand Loctite specializes in adhesives. With hairdryer/heat gun can remove later.
@toxicthreat43504 ай бұрын
Just copped the same bike love it so far
@genxjya4 ай бұрын
You won't be disappointed. Loved it but I traded it in for MT-07 last week.
@82757ares4 ай бұрын
did it smell burnt at first?
@genxjya4 ай бұрын
Ya I think so. I removed it because I got really bad gas mileage. I think there were some leaks. Should have put some sealer where the pipes meet. Probably a tune may help but didn't want to flash ecu. Also, it would defeat the purpose of getting a cheap exhaust if I have to pay as much for a tune. I traded in the bike for a MT-07. Checkout the vid on my channel.