Интересантна ствар ,нисам знао за то раније 👍👍👍

The Schumann resonance has an affect on the human condition. "I Suggest"

1st of april is still 3+ months away...

Very good job my friend.. Keep it up.

🦆Quackerie +++

Priviet 👍👍👍👍👍👍👍👍

after short reverse engineering, it appear to be based on Skori/Tefatronix push-pull design, but with simple coil (not center taped), small resonnant caps and inductor chokes (ZSV style). I love it so much power in a so small beast!

Ciao Mirko, guardo spesso i tuoi video. Complimenti veramente! Un saluto dall'Italia! Ciao!👋

does it have to use a 470uf capacitor

Hello, ADG441 can be used instead of ADG444

Hey i tried this setup with few modifications, primary 5turns secondary 300turns.. MOSFET irf530 , uf5408 diodes for rectification and protection of MOSFET, 10k resistor and 8k potentiometer. It was working with 12v when I used full bridge rectifier though not showing any arc, but on 220v ac my 200w bulb (in place of ballast) continuously glowing and no voltage is coming at gate source

hi wise man tell us about the connection of second anthena 🌻

I heard you have to put the coil facing North when placing the pemf on the person for treatment. How to check whether it's facing north and not south

Mirko please explain how to properly ground the arduino and not use a metal case, is it possible? Your code works on my arduino, but shows the maximum values, but if I touch the GND contact everything works fine and the values ​​are adequate

Hi there mate. I was just checking some videos on KZbin, then I came across your video. So, you've revert back to the root base of Tesla coil, the famous spark gap type. Well, that's nice. Keep it up. Take care. Cheers.

Hello sir. Where is the code and the schematic diagram of this project? Can you send us a link? Thanks ❤

So retro!

Grandpa rife was a boss

Can detecr treasure gold

Sir how to make gold detector with this gadject

You can dissasemble the meter and print a calibrated FM/AM/SW scale and glue it on top of the original meter scale.

what is your country ?

Good evening, I would like to do this project but I've been trying for several days but all the time the src wificonnect library fails among others and I've done everything and I can't record on the Esp32, could you help me, if you can, I'd appreciate it

You can't make better labels?

A very creative dial. This idea allows for a smooth pointer transition and offers a unique experience. In my projects I used a 100K precision potentiometer with multiple turns to cover the entire range from 0 to 100K. This enabled finer tuning; however, the time to sweep through the range is significantly longer. It is worth noting that the SI4825 has a very similar pinout to the SI4827 (which shares the same digital interface as the SI4844). Your project can easily be expanded with the SI4827, offering the possibility of adding an LCD or another display. The SI4844 library for Arduino works well with the SI4827.Nonetheless, thank you for sharing this great idea.

Congratulations on your great project and thanks for the unique tips.

Very unique, I have never seen a meter movement used as a tuning dial, very cool, and I like the idea of pot for tuning and fine tuning. I have ordered a radio board that uses a similar chip the KT0936M.

Another beautifully designed and fabricated radio project. Thank you so much, Mirko, for showing it to us. Just curious....why did you limit the SW bandwidth, when you could have gone from 2.3 Mhz to 28.5 Mhz? I am guessing it was either difficulty with the potentiometers, or that the analogue dial couldn't encompass the full sweep....? Not that you miss too much action at both ends, really. Thanks.

do you think this simple setup can be adapted to a Tektronix T310P model of CRT?

Parabéns de Portugal

hi , do you know to make a laser diode 30w fat beam width 2cm?

I want to build one just for the heck of it. Looks fun.

Hello I was wondering if you could give me suggestions on the easiest way to create 1million volts AC signal and/or pulsed DC? variable frequency and without multipliers.

I would like you to build me such a device, but I'd like to see the plasma tubes on hand held mounts, to be placed where needed... Maybe on a meter of cable. Can it be done for 2K US?

pls share the code

Please provide the code

Door lock using lifi tutorials pls

Full tutorial please

❤❤❤❤❤❤❤❤❤❤❤❤❤

Couldn't you do this with a rpi zero and 3.5" tft lcd for like 1/10 the cost?

Hello, I'm trying to compile version 3.5 and this error is appearing, and all the files are in the same directory and I've already replaced the file in the main library, could anyone help me? 'ledcsetup' Was not declared in this scope

Hi congratulations on the video! How did you make the two metal cylinders you hold in your hand? Thank you

According to other sources / devices, the best frequency for cell regeneration is 150 mHz.

Very, very Nice!

Это фигня, не аппарат Лоховского, а трансформатор Теслы.

Send me it like a battery charger for no problem in the post office.

I can see it's possible Thank you, and you send it to my address. It's ok for you?

2Vpp= ~0,6Veff power P=Ueff x Ueff /R= <0.1W. Conection G1 @ G2 of L is not OK

Can u please tell the dimensions?

I made it with ardino uno and not working