Can you force dry the chrome ( or any of your paints ) between coats with air from your airbrush? Should the chrome be cleared?
@robertbollinger30098 ай бұрын
Thank You…….
@bryanweis12138 ай бұрын
What psi do you spray with this stuff?
@jeremysears99649 ай бұрын
I was struggling with other paints being new to air brushing my kits. My local hobby shop put me onto these paints and they are a game changer. So many of my issues were resolved! Highly recommend
@hhaste5 ай бұрын
Still going good? I just tried my first Mission Models paint today without any issues but I've read a bunch of horror stories online about tip dry, chunky bottles of paint, etc. The general consensus is they're harder to work with compared to other water based acrylics. I normally only spray lacquers or solvent based acrylics, which are both very easy to use.
@johnathan1339 ай бұрын
Calling this chrome is a stretch. It looks more like polished aluminum at best.
@stephenrose134310 ай бұрын
Hi,I have been using Misson models paint for a couple of years, they take a little time to get used to, but the results are excellent. I like the clear coats,and find that the semi gloss coat, meets most of my needs, I will stop putting a drop of polyurethane in, as advised. Good clear, concise demo, thank you.
@Bazwelle11 ай бұрын
I like MMP paints but I've just encountered an issue with the line when I tried to do some wet sanding. When coming into contact with water, the paint reactivates and can completely remove it with just my fingers, even if dried for days. This doesn't happen with Tamiya but not sure if this is just an MMP thing. I always follow the mixing ratio of 10% thinner and 10% poly and not dusting on paint. That being said, the same doesn't happen with the primers, those stay strong. Can MMP normal paints be wet sanded (outside of primers)?
@jontamkin256011 ай бұрын
Tamiya paint is a synthetic acrylic. Mission Models is a pure water based acrylic. We always dry sand with 2500 sanding pads. The primer is a different formula than the primers.
@Bazwelle11 ай бұрын
@@jontamkin2560 Thank you for the info, that explains it! I was trying wet sanding for the first time and I could see in the MM FAQ that we could wet sand the primer and clear coats but couldn't find information on the "normal" paint line. Will follow your suggestion! Thanks again!
@rickgregory9616 Жыл бұрын
Just discovered your videos. The most recent is 4-years old. Are you no longer posting videos?
@blueline308 Жыл бұрын
I think they are out of business. Nobody uses their paint anymore. They lasted a year or two, then poof..gone.
@rickgregory9616 Жыл бұрын
@@blueline308No, they're still around. I just bought a few from Amazon.
@mwkelsey1 Жыл бұрын
Just tried your primer, gloss black for chrome to be specific. Bottle said do not thin, I had to add thinner to get it to spray out of my airbrushes, tried all 3 at 25 psi.
@paulmcwilliams1709 Жыл бұрын
I'm guessing you don't use rubber gloves when you paint?
@SteveStokes1971 Жыл бұрын
I like the paints but I simply cannot get the primer to spray. I’m trying the red oxide and it’s just way too thick for this ratio. I’ve added drops of the thinner, changed needle sizes, bumped up psi. No luck. Once I finally got it thin enough to spray, it just scrapes off with the slightest scratch. Any thoughts on what I could be doing wrong?
@nathanram809 Жыл бұрын
just to make sure i understand: you used the same ratio for base coat (wide spray) and for the camo (narrow spray)?
@ponsquiglious Жыл бұрын
See, I would've loved a warning that mission models paint is an airbrush paint
@Shadoweclipse1386 Жыл бұрын
That blue tinted chrome looks phenomenal!!!
@pawelewandowski59 Жыл бұрын
Great video 👍
@cocobill2222 Жыл бұрын
Very good video.question how colori drops,how thinner,and PSI tks
@Emtbtoday Жыл бұрын
Hi are these paints acrylic? I order a bunch last night but just Remembered about thinner this morning! Do they need the mission models thinner or any work with them just now till the order for the thinner comes?
@missionmodelsus3920 Жыл бұрын
Please use Mission Models thinner only
@DevourIsDead Жыл бұрын
I’m kind of confused, I used this chrome for the first time a few days ago. I started with the black undercoat for the chrome and it went on good and I let it dry…maybe not for long enough (30-45min) and the chrome itself was very blotchy and almost bubbled when applied. I shook it for a decent amount of time, I tried different psi and it still ended up looking odd. I am probably going to just throw the part in some LA’s Totally Awesome and try again.
@Mr.HobbyTime Жыл бұрын
Can I use the hairspray chipping technique with mm paint
@missionmodelsus3920 Жыл бұрын
Thank you for asking yes you can.
@Mr.HobbyTime Жыл бұрын
Thank you so much I will definitely try it 😁
@everardomarquez6242 Жыл бұрын
Found out about you guys from the Adam Savage video and I went ahead and ordered some paint and I gotta say, I love your product! Thanks
@jontamkin2560 Жыл бұрын
HI Everardo, excellent gold you are enjoying the paint and thank you for your support! Sincerely Mission Models
@siadream6728 Жыл бұрын
More video please, thank you
@ucwe111 Жыл бұрын
If you were to us a clear color (say red for example) over the chrome after it's cured, would it keep any of its reflective properties or would it just defuse into a silver base?
@woof3598 Жыл бұрын
Norm sent me (-:
@Steve-dr7rr2 жыл бұрын
Will you be doing any newer videos at all cheers
@Steve-dr7rr2 жыл бұрын
Hi and thanks it really helps me as just going to be using the 0932 Russian modern green in next couple of days still trying to find a outlet in U.K. I can use
@Batuhankaygan9762 жыл бұрын
I was following your paints in Turkey and bought many of your paints from Şimşek Makina. I am very happy with normal paints Unfortunately, the primers and polies are broken down. I tried to airbrush it, I cannot spray it because turns like a putty. I went Şimşek Makina again and he apologies for this and gives me two more new bottle with no cost but also these are not good. It is not a good think for Turkish Market. We are very happy with your dealer but we are not happy with your primers and polies
@WMTrackdog2 жыл бұрын
Very cool! Can't wait to try them on my next project. Couple of questions; Whats the rate of curing? How long will a hot mix be workable and can you store it for future use?
@richardmitchell30372 жыл бұрын
Best model paints I have ever used....you can even wet sand when the paint is completely dried!
@missionmodelsus39202 жыл бұрын
Thank you very much Richard! We really appreciate it!
@turkerinan17352 жыл бұрын
Perfect basic guide! Thanks!
@artheriford2 жыл бұрын
I saw this line at my local Hobbytown. I have been using Alclad II for metallic finishes and am pretty disappointed. The lighter colors have zero durability when masking. This looks interesting.
@Nocturnes19842 жыл бұрын
I used Tamiya thinner on these paints....result wasn't pleasant to be honest.
@nateg63202 жыл бұрын
Love the elevator music 😆! Nice video! This reminds me of a Bob Ross painting video, and I mean that as a compliment
@missionmodelsus39202 жыл бұрын
Thank you Nate!
@PlasticImaginationWorkshop2 жыл бұрын
I've used your primer on several builds in several of my video's. The current video I'm working on, I used another brand of white primer, (I didn't have any MM white primer) and it did NOT go well. I sanded down the non MM primer and used MM gray and what a difference, came out great. I won't be using that other brand of primer moving forward. Just wanted to say thanks for a great product and I just ordered another bottle of grey primer. Have a great day. -David
@PlasticImaginationWorkshop2 жыл бұрын
Thanks for the demo, I'm getting ready to try this on a set of wheels. Just letting the gloss black dry first. I'll let you know how it goes, I'm looking forward to it. Thanks, have a great day. -David
@grimthoughts3 жыл бұрын
Hands down the best paint I’ve ever sprayed! Bought my first batch of them a month ago, watched this video before using and could not ask for a better spray and finish! Found my paints for good!
@missionmodelsus39203 жыл бұрын
Thank you CaptinGrim! We really appreciate it and your support
@ramza8133 жыл бұрын
need to get me a spray bottle! never thought of that!
@Death_true3 жыл бұрын
So uh call me a dumbass if ya like I was cleaning my Airbrush got all the parts cleaned and ready to be reassembled well I while I was putting the nozzle back on I twisted it too tight and it broke in half. Half came off and half is stuck where it should be I have a back up but I’m having trouble getting the bottom half of the broken one out anyone have any ideas on how
@jlcsr91633 жыл бұрын
I see you are not using an extractor what about airborne particles?
@richardmitchell30373 жыл бұрын
When I first started experimenting with Mission Models paint I had some problems with shooting the primer through my airbrush but I didn't have any problems with the regular MMP paints, however once I figured everything out these paints have now become my go-to paints. Over the years I have used every kind of model paint (including lacquers) and I have to say these are the BEST model paints I have ever used! Thank You and keep up the good work!
@michaeltipton19193 жыл бұрын
Great tutorial! I’ll be using Mission Model Paint
@AreaWest13 жыл бұрын
Great tutorial!
@normanbeaulieu42043 жыл бұрын
Why does this guy sound like the host for “Cash Cab”? No really!!
@normanbeaulieu42043 жыл бұрын
With the thinner. Is there a Createx equivalent?
@statoilbensin21903 жыл бұрын
1:03 Hey thats tier abuse!
@statoilbensin21903 жыл бұрын
Does the poly also work as a retarder/flow improver?
@statoilbensin21903 жыл бұрын
I also have the harder and steenbeck, you absolutely need to have that aircap off while working with acrylics. It will spit because of paint build up in the front.
@fissan453 жыл бұрын
Hi there. Great video. One question: is clear coating the same as varnishing??
@cx32643 жыл бұрын
I use your have glass grey but found it is wiped out easily after spraying. Can you let me know how to make the paint be more durable? Thanks
@Slash2be3 жыл бұрын
Are you literally counting 30-40 drops? What am I missing? Or do you just know what 30-40 drops looks like??
@briansrcadventures13163 жыл бұрын
Ooh, now that is interesting. Especially when kit instructions call for white sidewalls on vinyl tyres, but no sidewall decals are supplied!