Thanks for this. Great videos. At 53, I am getting back into models after over a 30 year break. Things sure have changed in terms of great product and technique. Thanks again.
@missionmodelsus39203 жыл бұрын
Hi Dave you are very welcome and thank you for the nice message! Now is a perfect time to start modeling again
@RobPearlman5 жыл бұрын
These videos are great. I am a new modeler and new airbrusher. I like your paints because I can spray them in my apartment without poisoning my wife and dog! These videos have helped me nail down the technique for using your paints properly. keep up the great work.
@bucknertarsney76745 жыл бұрын
I love these MM videos. Thanks for taking the time to make and produce them.
@PorscheRacer614 жыл бұрын
Thank you so much for these videos. Super helpful. Love your paint system.
@AlexModeling4 жыл бұрын
Very good results and easy to get it! Thanks for this tutorial
@P51Dfan4 жыл бұрын
Love the bassanova music. I really noticed it around minute 16. Seriously these videos and the MM paints are truly making me love plastic modeling again. I'm learning so much and being relatively successful. I'm a loyal customer now. Thanks for keeping me sane during 2020.
@missionmodelsus39204 жыл бұрын
Thank you and keeps things nice and relaxing:)
@sparker46145 жыл бұрын
Great video. Thanks.
@richardc-ex7rt5 жыл бұрын
Thanks for the vid. I was about to toss my MM Semi gloss coat because I thought it was just terrible. Turns out I wasn't thinning it enough.
@stephenrose13437 ай бұрын
Hi,I have been using Misson models paint for a couple of years, they take a little time to get used to, but the results are excellent. I like the clear coats,and find that the semi gloss coat, meets most of my needs, I will stop putting a drop of polyurethane in, as advised. Good clear, concise demo, thank you.
@jsilvidi94904 жыл бұрын
VG video, TY for the info
@nateg63202 жыл бұрын
Love the elevator music 😆! Nice video! This reminds me of a Bob Ross painting video, and I mean that as a compliment
@missionmodelsus39202 жыл бұрын
Thank you Nate!
@fissan453 жыл бұрын
Hi there. Great video. One question: is clear coating the same as varnishing??
@angelreyes-vp9tc4 жыл бұрын
Would this be the same process with a clear coat spray can? Sorry I am new to this clear coat thing.
@jvmhammer59903 жыл бұрын
When I tried to clear coat after the decals, before trying to weather it, the semi-gloss sprayed on and created droplets rather than going on even like the first semi-gloss. I thought perhaps it would self-level but it dried that way. I had to try to sand down the clear coat as best I could. Did I not prep properly for the second coat over the decals? Was there something I should have done differently?
@robertbollinger30095 ай бұрын
Thank You…….
@CraigBaumer5 жыл бұрын
What are you using to clean the airbrush? Homemade? If you mentioned it I didn't catch it sorry.
@CraigBaumer5 жыл бұрын
Never mind! :-)!!
@squidlips66615 жыл бұрын
You need to do gloss because I just cant get a gloss coat
@jvmhammer59903 жыл бұрын
Do you clear coat the canopy or does that need to be masked?
@missionmodelsus39203 жыл бұрын
You need to mask the clear parts of the canopy and then paint the frames of the canopy
@captaincruise87964 жыл бұрын
I am having problems with decals that will bond too quickly, irreversibly, so I can’t adjust their position after only a couple seconds. Anything you could recommend to deal with these kind of decals?
@reconmodelsvaughn4694 жыл бұрын
A better clear coat i like mig or ak clear coats I don't like mission models or Createx Coats or Createx same thing
@georgeclover31314 жыл бұрын
Is there an advantage to semi vs gloss for decals?
@missionmodelsus39204 жыл бұрын
There is no need for a full gloss when decaling. Semi is all you need and. Full gloss is a bit over kill plus semi naturally levels better than full gloss
@georgeclover31314 жыл бұрын
Ok, thanks!
@shezmu243 жыл бұрын
Ive been trying to get the flat clear coat to work, I've been spraying very light coats but it still ends up looking glossy whats the deal?
@missionmodelsus39203 жыл бұрын
You are applying too heavy and buiding up too much carrier. Allow each dusted coat to dry 1st
@stevenpetersmusic4 жыл бұрын
How does this compare to future? Is the clear UV protected? Lastly, can I spray future on top of this?
@missionmodelsus39204 жыл бұрын
It is far superior to future. Future is floor wax. This is an automotive grade acrylic clear coat
@missionmodelsus39204 жыл бұрын
Yes Mission Models Clear are UV protected and will not yellow or crack
@stevenpetersmusic4 жыл бұрын
Thanks for the quick response. On my way to buy it.
@bryanweis12135 ай бұрын
What psi do you spray with this stuff?
@jayandry33924 жыл бұрын
:
@pglx685 жыл бұрын
Good video. Thank you. However, this pop in the beginning of your videos is pretty loud (compared to the rest of the volume) and annoying. Please take care of that.