Could you provide links to the stuff you used? Looking to buy one with low miles. Any turbo issues? I heard some turbos get carbon buildup.
@shermanyoung81854 күн бұрын
I have the Guozhi 200P $300 multi process welder off Amazon its a good diy ,hobby welder simlar to the Azzuno🧑🏭
@Toolnaround4 күн бұрын
@@shermanyoung8185 I saw those they look great
@volt101x6 күн бұрын
I just went with the 5.6L V8 Gas.... 100HP more & far less problematic 🤷♂
@jeffherman54386 күн бұрын
Very creative and it looks sharp.
@Toolnaround6 күн бұрын
@@jeffherman5438 thank you !
@skylarsohns95199 күн бұрын
Sounds good man I have 2017 platinum XD just broke 100k miles
@Toolnaround9 күн бұрын
You should check out my other video I made some custom stacks for it...sound great!
@skylarsohns95199 күн бұрын
Have to take and get tpms sensors reset after mew tires?
@Toolnaround9 күн бұрын
I did not like the factory pro 4x wheels so I bought these from someone else with the midnight package but sensors were not included ...next set of tires I will add sensors. I got used to it by now but the first year I thought about cutting the wheel and ending it all over that damn tire light.... 🤣
@haroldwright501317 күн бұрын
you need to get S&B air intake, better gas miles.
@Toolnaround14 күн бұрын
I sure do ...that will be my next mod
@haroldwright501317 күн бұрын
Where did you get that bug shield?
@Toolnaround14 күн бұрын
I'm pretty sure I bought it from Nissan parts
@MartiArtisan25 күн бұрын
What welding cart are you using for the Azzuno? What size bottle is that?
@Toolnaround24 күн бұрын
The tank is an 80 cuft the cart is the Vulcan from harbor freight
@@Toolnaroundthanks for the response! How long does the tank usually last you?
@waynenoll196726 күн бұрын
I really like the size of the XD but would probably get a gas engine if I bought one
@Toolnaround9 күн бұрын
They have the gas XD
@waynenoll196726 күн бұрын
Those are some long trips from Louisiana. What part of the state are you in?
@Toolnaround9 күн бұрын
North of lake Pontchartrain
@alandewar3143Ай бұрын
I owned mine 1 Month and the Coolant Tank went. 84.xxx Miles and the Replacement was around 240ish Bucks for the Whole thing.
@ToolnaroundАй бұрын
Yeah I think I will be doing the same very soon
@PhilstoPhx29 күн бұрын
We just bought a 2019 in March. In April, we were going through the mountains in WV heading to Ohio and limp mode kicked in. When we got the trailer setup I went to an O'Reilly, I forgot my reader, to get the code. The local dealer was able to get it to clear. And said the coolant tank was backorder. When we got back home, I called the dealer and got told the last one took a year to come in. I was able to find a national warehouse and got told Nissan was in negotiations with the manufacturer and had no idea when they would be available. If you find a source for new, please post it!
@lwidinaguilar245Ай бұрын
tuning is very crucial in these 5 liter cummins im doin one that has a cracked piston customer also did the egr and def delete but now he needs a whole new set of injectors due to carbon deposits head gaskets piston piston rings ex not to happy with his decision anymore lol also milage was at same as yours might want to trade in that junk
@ToolnaroundАй бұрын
This has been by far the best truck I've owned has brought me and my family across the country in every direction pulling my 5th wheel and at the moment still running like new. This truck attracted alot of first time diesel owners who don't realize the significance of maintenance on a diesel leaving their truck in the hands of unqualified mechanics.
@StrateTrippinАй бұрын
It's definitely a truck I'm looking into. I had a 17 titan then got rid of it after we bought our house. For the price for diesels this is a solid deal. How's the power on it. I've have ford's since that 17 titan and I regret getting rid of it. Great video brother!
@ToolnaroundАй бұрын
Great power and comfort a perfect balance between a 3/4 and 1/2 ton
@ToolnaroundАй бұрын
nolatoolsforless.com/
@ToolnaroundАй бұрын
nolatoolsforless.com/
@ToolnaroundАй бұрын
nolatoolsforless.com/
@ToolnaroundАй бұрын
nolatoolsforless.com/
@ToolnaroundАй бұрын
nolatoolsforless.com/
@ToolnaroundАй бұрын
nolatoolsforless.com/
@ToolnaroundАй бұрын
nolatoolsforless.com/
@joenissanАй бұрын
We dont have emissions for these trucks where I am in ny but no way am I messing with federal emissions.
@ayushshah1777Ай бұрын
The review was helpful, esp when cheaper tools are finally competing with the big brands
@mrxmrp8795Ай бұрын
When I move out of this shit state Kalifornia, I’m going to get a modern diesel and remove all the emissions crap.
@gopalranjiАй бұрын
❤
@erlinjosuevalle6567Ай бұрын
After egr delete does it makes roll coal
@ToolnaroundАй бұрын
It can if you want...I have mild tow tune
@rjb.8770Ай бұрын
also make sure to check your injector harnesses regularly
@thecliffold5879Ай бұрын
For the crank issue?
@CountryLivingOnTheFarmАй бұрын
After all the mods and stuff do you have any active lights on your dashboard? If not, how did you bypass?
@ToolnaroundАй бұрын
Your tune corrects this
@WilliamL1988Ай бұрын
Great video, thanks for the info. What are the odds, I just realized at 5:00 that vintage st is in the background. I'm from metairie and live in Slidell. I have a 2019 titan xd sv with 44k miles, I've been thinking about the ezlink but I still have a warranty on my truck and not sure if I want to change anything yet.
@ToolnaroundАй бұрын
I actually have a place in Slidell as well here for summer...if I can help let me know
@Mike2500ableАй бұрын
Good evening Tool-N Around, by chance do you still have the size for the Orings at the lift pump? I’m still running a stock 2016 that I bought new. Thanks for sharing and helping out fellow XD owners.
@ToolnaroundАй бұрын
Hello I do have those ..I will send you the list needed to change all and location in a few
@Mike2500ableАй бұрын
@@Toolnaround thank you.
@ToolnaroundАй бұрын
@@Mike2500able I have 3 pics that show the receipt of o rings which include sizes and company to purchase from ...how can I get these to u?
@afranco9Ай бұрын
Did you attach the correct link? It's over $400 on Amazon.
@ToolnaroundАй бұрын
I would give it a few more days they go on sale often. They had a save 50% at checkout box when I made this review.
@WATSONLFАй бұрын
Bro thank you 🙏🏽 great great informative
@joseduranjr4963Ай бұрын
We just bought another 2016 (2017) Nissan titan XD Platinum Reserve with 47,000 miles. What exactly do we need to do to keep ours running smooth like yours?
@WilliamL1988Ай бұрын
I have a 2019 with 44k(my first diesel)change your filters at 10k miles, change oil around 7k miles. I found online apparently the trucks come from the factory with valvoline premium blue so I just started using that. I drive at least 50 miles a day round trip commuting to work and never let the fuel get too low nor the def and everything runs so smooth. I also installed an auxiliary tank for longer range
@Snakekiller231728 күн бұрын
@@WilliamL1988 how much did the auxiliary tank cost you and how many gallons?
@BrunoLima-kb8ksАй бұрын
Nice looking titan, whats the tongue weight on the fifth wheel you pull?
@ToolnaroundАй бұрын
Thanks....pin weight is 1,359lbs
@ToolnaroundАй бұрын
When I purchased this model I assumed being named 250 Aluminum - that it was able to weld both DC and AC Tig I have reached out waiting on response but am pretty sure it's DC only my mistake. That being said still a great welder with quality that surpasses most in its price range.
@morenothing4uАй бұрын
This guy don't know wtf he's talking about calling a dc tig machine an ac/dc machine. Do you shill much?
@davedirocco1172Ай бұрын
So, just be clear if I heard him correctly he claims that this is capable of AC tig. Is this correct? Can someone from the manufacture confirm?
@edwardwoods59772 ай бұрын
Very cool.
@Divided-we-fall2 ай бұрын
I have been eyeing the Azzuno for months, it seemed to good of a deal to be what they claim. Probably going to pull the trigger now.
@Toolnaround2 ай бұрын
For the money it can't be beat...not saying there's not better but at this price it's a great investment your going to be surprised of the quality.
@wyo_garage202 ай бұрын
It does look decent, I’ll give it that. I’ve got three Lincoln’s and looking to add two more (225 TIG and 262 MIG so much larger machines). Maybe I’m hearing things but when you clacked the grounds together they sounded different, more “tinny” with the Azzuno maybe. Grounds are easy to change of course. None of these Chinese ones were available when I bought my first Lincoln back in 2002/2003, not really when I got my TIG back in 2018 and committed to it.
@bobbywills94872 ай бұрын
I want to know what your fuel mileage has gone up to. I have a 16 xd platinum reserve 4x4 with 55,600, and have been tired of losing mileage do to regen. I love my truck, i picked it up late 18 with 18,100 on it, but am really getting tired of losing an 1/8 of a tank plus of fuel everytime she regens.
@Toolnaround2 ай бұрын
16.5 -17 mpg city around 19-20 highway
@bigj60532 ай бұрын
Thnx for your time. I was looking into the azzuno for light use around the house tasks n I do believe you just sold me lol. I'm lookin forward to seeing that headache rack! Thnx again
@jazielmendoza29972 ай бұрын
Great video, i have same welder . I want to create a quick disconnect to gas inlet valve. To get rid off barb claps. I not having any luck with MM barb fitting . Any suggestions to do a set up ? Greatly appreciate it Does azzuno have a tech support phone number? I can find it . And they have not responded back by email Thanks 🙏
@Toolnaround2 ай бұрын
Best way to contact Azzuno is through Amazon. Find ask seller a question
@jazielmendoza29972 ай бұрын
@@Toolnaround so they don’t have phone number? I will keep trying 🤣
@jondavidmcnabb2 ай бұрын
Great video, but this is not AC. This is a straight DC machine. That doesn't prevent it from doing Aluminum. You can electrically weld aluminum in DC several ways. 1. Using special flux covered DC Aluminum Arc rods. 2. DC Mig 100% Argon Spray Transfer using 4043 or 5356 wire. 3. DC Tig with 100% Helium. (there are other ways but those are called cheats and not generally talked about). This is still a very very good DIY home welder. P.S. if it was AC you would have the ability in the control panel to change the frequency and balance (generally).
@gordjohnson702 ай бұрын
"ARC CAPTAIN" welders are a very good option. Lots of reviews on You Tube.
@loganellsberry95652 ай бұрын
What size tires are on your truck? Any lift or level as well?
@Toolnaround2 ай бұрын
285/60/r20
@craigguinn54232 ай бұрын
Also FYI, I got a Titanium 170 a couple of years ago. I’ve made several large projects in steel with MIG, I’m on 125 bottle four of gas. It’s quite capable. I got a spool gun for aluminum, but haven’t tried it. I’d probably change brands for TIG, if I get to that.
@dnrk12052 ай бұрын
What are you sources for all the mods you did. I have that exact same truck.
@Toolnaround2 ай бұрын
My local shop no longer offers off-road tunes but if you search online everything needed can be found
@echdan12 ай бұрын
just bought titanium few days ago haven't open box yet . will be looking forward to your next vid welding
@EliAngwin2 ай бұрын
Just a FYI for anyone looking to TIG aluminum- a water cooled torch is almost a must for anything more than 1/8” or buy a #26( I think ) tig torch- which is a large torch. Either way Tiging aluminum uses a serious amount of heat.