OldOnesWithDice

Пікірлер

@kevoreilly6557 3 сағат бұрын

The future is now …

@godconvoy 21 сағат бұрын

Wish they had this in stock!😢

@oldoneswithdice 9 сағат бұрын

They are a real small company. I think it's around a half dozen employees. If I understand their logistics terrain is all cut on demand. Usually it's able to be backordered and when there are enough in the queue they run a batch. I'm not sure what's going on with the demonship terrain. I'll see what I can find out.

@oldoneswithdice 5 сағат бұрын

@@godconvoy I asked on their discord and one of the owners thinks they might be cut right now. They should be in stock again in the next week or two. Personally I'm looking at also picking up the Pitlord terrain

@godconvoy 3 сағат бұрын

@oldoneswithdice , that game seems fun too, and has more than it being the fantasy version. It's just sucks that like half or more of their products are showing sold out now.😔

@franksilva3566 Күн бұрын

I learn a lot from your videos, I just started printing miniatures with resin - because of your experience, it would be helpful if you did a video on how you finish or prep your prints (especially how you deal with the ‘dimples’ - I have the same issues) - is it a support settings solution or is it a finishing (sanding) or a combination of both? Thanks

@mikefish1124 Күн бұрын

I mean the new models and the new game are both fantastic. Why do you need convincing?

@Wolf359inc 2 күн бұрын

One Page Rules is what you are looking for. Print them at home. Order physical prints. Six core systems, where the basic rules are free, and you get access to the advanced rules, forever, if you subscribe to their Patreon for just one month (though you will probably stay for much longer…).

@swells1 2 күн бұрын

Need non toxic resin for me to get into resin. FDM is great for terrain which I am now using.

@oldoneswithdice 2 күн бұрын

That's what I like about BSS' approach. By selling the physical and STLs they can appeal to both markets.

@kylewilliams6091 Күн бұрын

Get yourself a cheap 2x2 grow tent and in-line fan combo and pump it out the house

@marchenplay 2 күн бұрын

Black site does some AMAZING games and rulesets, this one in particular is by Corey who's an awesome dude!

@oldoneswithdice 2 күн бұрын

Corey is great guy. I've talked to him on Discord and had the pleasure of meeting him at Adepticon this year.

@marchenplay 2 күн бұрын

@@oldoneswithdice Adepticon was amazing! We also brought or game to the convention. I was super surprised on how many smaller games were using 3d printing now.

@oldoneswithdice 2 күн бұрын

@@marchenplay what game?

@marchenplay 2 күн бұрын

@@oldoneswithdice Ignition core games! We have three game systems! The titular Ignition core: (Giant robots), Shining Heroes (Rpg adventure) and Magical girl assault (Fast low count skirmish wargame)

@oldoneswithdice 3 күн бұрын

Do you think 3D printing is the future of Tabletop Miniatures Games?

@doombringer4519 3 күн бұрын

I think the biggest issue is that GW has such a lions share of consumer attention. Unless GW starts making STLs (which isn't gonna happen for a WHILE) or somehow there's a game that catches the attention of a lot of people, most people are gonna stick to kits as they want the official GW look. That being said, I think smaller games will be shifting to almost exclusively 3D prints, as it lowers their manufacturing upfront cost and helps with outreach

@Bobyoudontneeemyname 3 күн бұрын

Without a doubt 3d printing will dominate.

@JPGotrokkits 2 күн бұрын

Sea Dog Game Studios has been using 3d printing for production since 2011. BSS is well behind the curve.

@mechaman88 2 күн бұрын

The biggest issue is we need a consistent and reliable printer without material risk. I would love an FDM, even with layer lines that could print with accuracy

@Dstinct 2 күн бұрын

I think it will add to the hobby aspect, but I don't see it dominating. Injected plastic is still the easiest product for someone to interact with, and many people would rather pay for ease that deal with the extra steps of printing which is basically an additional hobby on top of the hobby.

@randomtvninja 4 күн бұрын

I recently backed two awesome mecha based wargames Fractured sphere And Revelations: Battlefield I'm in talks with the first game to sell printed models for them and the second game comes with both STLs and physical models.

@oldoneswithdice 3 күн бұрын

I totally missed the Kickstarter for Fractured Sphere. I just reached out to David about a late pledge deal. I backed Revelations Skirmish but not the latest one. I haven't had a chance to get it to the tabletop yet.

@randomtvninja 3 күн бұрын

@@oldoneswithdice I think everything will get uploaded to his MMF account and you'll be able to grab the STLs from there.

@drpretzel2086 8 күн бұрын

I love seeing more of Blacksites stuff on KZbin. Gives me a bit of personal hometown pride.

@oldoneswithdice 8 күн бұрын

Check out our other videos. Some unboxing videos, our first battle report(Mobile Arms), and a couple others in the works.

@EthanVollmer 9 күн бұрын

You should do a video on mini painting for people with zero knowledge on the subject.

@oldoneswithdice 3 күн бұрын

That's a stellar idea you want to be on camera as a Guinea Pig?

@allthehardtimes 10 күн бұрын

Very cool

@marblemolly2454 11 күн бұрын

Sunlu is the best! Amazon has great deals, the transparent red is beautiful.

@xyzebruh1083 12 күн бұрын

Please test version 3.0

@glennledrew8347 12 күн бұрын

Well thought out stuff on the modularity front. The geometric precision of this technique certainly lends itself to modern structures, but for old world/fantasy buildings I wonder if it would seem too cleanly orthogonal. I'd most likely do any paint touch-ups after assembly. I liked the unobtrusive ambient music! 😊

@R0xxo 13 күн бұрын

Great battle report. The mat looks really cool, but I think it's too open. There should be line of sight blocking terrain in the middle of the field. Since the POI tend to be fairly clustered in this game you need a lot of cover to make the game interactive. Otherwise the big mech on top of the building is going to control the field every time.

@oldoneswithdice 13 күн бұрын

Thanks. You're absolutely right a outlet the LOS blocking terrain. I'm in the process of 3d Printing some scifi cars to use as scatter terrain and objective markers.

@domm3222 13 күн бұрын

Look good!

@oldoneswithdice 13 күн бұрын

Thanks

@iangraham6730 14 күн бұрын

I'm struggling with the sunlu abs like brand, will try 5-6 seconds tomorrow and see if that cure the issue, thanks for the info 👍

@LycheeSlicer 16 күн бұрын

This resin is indeed very resistant if your miniature is dropped, and it's easy to print 😁

@insanity_squirrel 20 күн бұрын

Hey mate! I just got my first resin printer after printing FDM for quite some time. I decided to go with this resin after I seen many reviews on its flexibility and durability and easiness to work with. I have a Uniformation GKTwo and I'm really struggling to dial in the settings to get decent mino prints! I'm doing like 1.5 - 2s exposure and I'm not sure what's wrong! I managed a near perfect callibration print and then when I try a model then the supports fail and everything sticks to the fep! Any tips and tricks for dialling in settings for this resin??

@oldoneswithdice 20 күн бұрын

What calibration print are you using? I recommend the cone of calibration. I find it to gets me in the ballpark. Good luck and let us know how it goes?

@thomasroberts7349 22 күн бұрын

This is NOT how to rebuild a passche. All that oil everywhere you won't be spraying anything but fisheyes everywhere. You do need to lube, but in very specific places. Also, you need to crank up the air using the fan cap.

@doritomaster-wv8lt 24 күн бұрын

Nice job on the battle report! That was a very hilarious game with all the light frames falling like flies.

@watsonstudios 25 күн бұрын

Been using the Sunlu ABS like for about 2 years and love it! I use the Black and solid grey. It's the only resin I trust.

@oldoneswithdice 25 күн бұрын

Do you have different exposures between the grey and black?

@watsonstudios 25 күн бұрын

@@oldoneswithdice Black is 2.8sec and grey is 2.5sec. on a Saturn 3 Ultra.

@tinyfishhobby3138 27 күн бұрын

I own the Sushi Shack and I’m in the process of turning it into something else. 😂 Wasn’t a fan of how big the front “sushi bar” portion was, so I’m simply leaving it off and using the remainder of the buildimg and a few add ons.

@oldoneswithdice 27 күн бұрын

One of the things I like about terrain from this series is that you can change them up so easily. I'm still editing my build video. In the meantime the finished result can be seen in this battle report. kzbin.info/www/bejne/bWPbeYCDpZKrmpYsi=mOqvFps9IgpRq_A8

@bulletz9280 Ай бұрын

I personally wasn't a fan of this resin. Like all "draft" resins it makes some significant compromises in detail and dimensional accuracy. Functional parts fit together poorly, or not at all, and I also found that uncured resin had a tendency to stick to it after washing, particularly near the underside of the print (nearest the build plate) resulting in a poor surface finish in those areas. Another area that I found lacking was the strength, in my testing it was so similar to standard resin that I could barely tell the difference. It might survive handling a little better but to be honest I suspect the Wargamer water washable resin is actually a bit better suited to that job. The two areas I found it was good were price and ease of printing. It's a fairly forgiving resin that doesn't seem to react as badly to amateurish settings or support placement as standard resins do. I think for the average wargamer printing minis it will be great and might even be the best in its price category. For more demanding applications such as model railways I think it will fall a fair way short of standard resins and high-end specialty resins.

@sirgridlock310 Ай бұрын

HELP PLEASE! Mars 2 pro. Standard gray works perfectly. Just got ABS 2.0 for the first time. Failure after failure! I used default settings. 60 bottom 8 layer. ABS recommended settings 35 bottom 2.5 and 3 layer. Still failure. I'm new to resen printing (except for standard resen)

@oldoneswithdice Ай бұрын

How is it failing. Are the base layers sticking to the build plate? In general I would recommend trying to print with 5 to 6 second for normal layers. Then reducing that exposure time until you have the level of detail you're looking for

@icklemoo Ай бұрын

those elf models are great as well ... always hard finding nice space elf models I find

@oldoneswithdice 28 күн бұрын

Unfortunately the source I had for those files has dried up. 😞

@superpael Ай бұрын

What settings do u use for the base layers? Im using a photon mono x.. and some pieces stick to the fep.

@oldoneswithdice Ай бұрын

I'm currently using 30 secs for the base layers.

@tonymullins8437 Ай бұрын

I just raise and lower my build plate (10mm up then Home) up and down about 5-10 times before I do most prints just to mix the resin in my vat. It seems to work pretty well to mix the resin & dye back up.

@looselycollected7505 Ай бұрын

I keep a flush cutter for supports that stays as a dirty cutter with resin residue on it. I wash it in alcohol. But it is devoted to the purpose. I think I'd just cut the supports, leave a bit of them attached to the model. Then wash and cure. Then use my flush cutter I keep for plastic to trim them. Cuts out the divots from the supports. It'd probably be a bit like trimming sprues on factory plastic minis. I'd already been using Sunlu standard to decent use. But for a bit more I'd be willing to try this for sure.

@codyfahnestock4791 Ай бұрын

Where are you located? I’m wondering if the climate there makes a difference to where I’m at. I’m in Louisiana and I’m chasing settings constantly

@oldoneswithdice Ай бұрын

Northern Wisconsin, though temp wise I use a heater in the enclosure to keep the temp at 80 F

@chantaljensen2629 Ай бұрын

That was interesting. Thanks for sharing. I learned a lot.

@chantaljensen2629 Ай бұрын

I really like these guys their nice n beefie

@chantaljensen2629 Ай бұрын

I have to get these for my grandson

@novamationmedia Ай бұрын

A few months ago I watched this guy talk about this resin. I gave it a try, and it is now my favorite go-to resin. Sometimes I mix resins, but this stuff is great right out of the bottle. I've used it for miniatures and small fabricated parts. I've seen people try to put it down on Reditt. My advice is, I doesn't cost that much to try it for yourself.

@oldoneswithdice Ай бұрын

I'm glad it working for you. What are people on Reddit saying about this resin?

@oldoneswithdice Ай бұрын

Thanks for the coffee. It's really appreciated

@marchenplay 2 ай бұрын

Are you into Mech games? Have you tried Ignition core btw? :D

@oldoneswithdice Ай бұрын

Looks interesting, those are some pricey mini though.

@marchenplay 2 ай бұрын

SUPER Love this game. I've painted a bunch of the Aurochs!

@user-sh9mc7mw5w 2 ай бұрын

I'm using abs like 2.0 with the Saturn 3 Ultra using 3 seconds exposure and 0.05 layer height, no problems with prints yet

@scottshouse2423 2 ай бұрын

I’ve switched as well and I love it.

@privatename7797 2 ай бұрын

Have you tried elegoo's new and way cheaper than sunlu ABS-Like 3.0? I believe it came out around febuary. It's base price not on sale is $18 per kg on amazon US

@bloodravenice8182 2 ай бұрын

I love using sunlu but was wondering where to find a resin profile for my mars 4 ultra

@1337FLINT. 2 ай бұрын

Have you tried this "new batch" of sunlu abs like? it have different sticker on the bottle. Is the settings still the same with the old one? I used the old abs like, and i really like the detail. But i'm scared i should tweak my settings again if this "new batch" change their formula Thanks in advance

@oldoneswithdice 2 ай бұрын

I haven't. I bought three 2 liter bottles a few months ago when they were on sale. I suspect you should be fine with the old settings. If you have any trouble comment and let us know.

@1337FLINT. 2 ай бұрын

@@oldoneswithdice Yep, i just tried with the same settings. Turns out it was okay, i don't need to tweak my settings with this "new batch" of resin Thanks for the reply

@joshiechoi 2 ай бұрын

I switched to Sunlu after watching your prior videos and have loved it, so thank you! However, I just noticed Elegoo came out with a 3.0 ABS-like that is much cheaper than the 2.0 and now near the price of Sunlu ($41 for 2kg vs $40 for sunlu). Any chance you have checked out the new 3.0 elegoo resin or have plans to check it out?

@oldoneswithdice 2 ай бұрын

Hmm I'll have to take a look at the new resin.

@GeorgMierau 2 ай бұрын

Keeping in mind what it is (a very affordable product) I'm actually quite impressed by Sunlu ABS-like! I like the warm "Dark Grey" color and it prints just fine. My only "problem" with it is the manufacturing date format: "G15C D04A"? Any idea how to read it?