The app that I have used was only on Android. There might be others like it on iPhone but probably won't be free.
@afandiindah291210 күн бұрын
@@JetManJoe Yes, it's true that you have to pay monthly, it's not free like on Android. For example, if there are free ones, please let me know
@afandiindah291210 күн бұрын
This includes not being able to go back and forth in only one direction Is it true?
@JetManJoe10 күн бұрын
Rotating the piece before each pass helps reduce a flat forming at the edge
@afandiindah291210 күн бұрын
@@JetManJoe So rolling of the reducer model must be in the same direction. If the reducer uses a 10mm plate with a large diameter, won't it be difficult to move the plate if it can't roll back and forth?
@afandiindah291210 күн бұрын
@@JetManJoe I've been rolling the reducer all this time having trouble having to move it a little when the roller is on the other side If you look at the video here, I think it makes sense, but what I question is whether the roller machine can be rotated back and forth without moving the rolled plate material.
@dave_ecclectic10 күн бұрын
Would have been nice to have shown it
@JetManJoe10 күн бұрын
This short has a link to the main video
@jonsy-jb8ci11 күн бұрын
LAYOUT😍
@MDSX-tb1xv15 күн бұрын
thanks brother
@ltdeditions18 күн бұрын
So you adjust your form roller the same amount on both sides? No pinching the steel more on the narrow side of the cone?
@JetManJoe18 күн бұрын
Yeah just even pressure on the whole piece
@ltdeditions18 күн бұрын
@@JetManJoe Cool! I just bought my first slip roller to hopefully make parts for a big pulsejet. Most of the information I found on rolling cones mentioned pushing one side of the form roller farther up, but on my machine the left and right adjustment are connected, just like on yours. I was wondering how to set up the machine to roll cones, but as I understand now, the snubber will take care of it?
@JetManJoe18 күн бұрын
Yep when I adjust my slip roller it lifts the whole roller evenly. Just put enough pressure on the work piece so it can slip a little but still roll through. The snubber will rotate it with ease. Look forward to your pulse jet. I have plans to build some in the future
@jomardeguzman9688Ай бұрын
Nice😊
@Gods_favorite_white2 ай бұрын
I made one but Wayyy less equipment. You only need 3 wires really. Made mine with a deer feeder battery and used wites from work. Sidnt wanna buy the 200 dollar one
@JetManJoe2 ай бұрын
I use mine on road trains (up to 4 trailers and 3 dollys in a combination) so I need the extra diagnostic abilities that I put into this tester.
@Gods_favorite_white2 ай бұрын
@@JetManJoe thats awesome. Ive noticed alot of the ones for sale have so many features that arent needed.
@shivajiboss9032 ай бұрын
Thank you so much bro You made my work so simple
@JetManJoe2 ай бұрын
Your welcome 👍
@valentinlishkov95403 ай бұрын
p;ease look at me
@JetManJoe3 ай бұрын
👀
@zalayeta0073 ай бұрын
Great Videos, straight to the point, thank you so much
@JetManJoe3 ай бұрын
Your welcome 😁
@BlobbyCHEZ3 ай бұрын
Looking good mate!
@g857864 ай бұрын
That’s a brilliant idea mate
@JetManJoe4 ай бұрын
Cheers it makes diagnosing road trains quick and easy. It runs off a milwaukee 18m battery making it very portable too.
@o0alr0o4 ай бұрын
so sensor is below the centre of thrust...
@juleouscamper52564 ай бұрын
Must have had scrap piece of #4 finish.
@barcaldine014 ай бұрын
Great vid! Very amusing 😂. Did you end up doing a vid on the Unimig Razor 40 air Plasma cutter?
@JetManJoe4 ай бұрын
Na I didn't, I've been busy building my jet instead
@leso2044 ай бұрын
Saw a man once who was a qualified engineer who had to make/fab a cone for a hopper about 6ft Dia he spent about 15mins doing the Pi-R square calc' drew it all out cut & rolled it - it was too small did it 3 times ,the guy walked from the job ............
@JetManJoe4 ай бұрын
Haha nice. Measure twice cut once
@leso2044 ай бұрын
@@JetManJoe: he did 3 times still got it wrong lol !
@pedroclaro78224 ай бұрын
You can also split it up, so you end up with less wasted material. That's better for my purpose - making a backpacking cone that doubles as windshield and potstand. Having it split means it's easier to pack, more vertically stable because on the extra joints I have length-wise ridges for interlocking the pieces. more cutting and bending work, more time to assemble as a tradeoff for way less material wasted, which is important to me because titanium is expensive.
@carlwilson17724 ай бұрын
Excellent work. Very impressive panel. The fuel tank looks like it will be superb.
@JetManJoe4 ай бұрын
Cheers mate, I'm a bit OCD so I like to overthink everything before I make it so it comes out looking top notch. Hopefully get some more done later this week.
@carlwilson17724 ай бұрын
@@JetManJoe I am exactly the same. Some call it OCD but I like things to look right and to be the best that I can do.
@JetManJoe4 ай бұрын
@@carlwilson1772 Taking pride in your work. 👍
@Skylos1005004 ай бұрын
why is there a gap in the shaft ?
@ksfurlover25 ай бұрын
Yahoo ! 4th try, I got it correct on paper. Now will transfer to aluminum flashing for the final piece. :)
@JetManJoe5 ай бұрын
What you making the cone for? Project?
@ksfurlover25 ай бұрын
@@JetManJoe I'm a hobbyist - so I picked up a solar spot light out of neighbors trash. It still worked - but lens clouded over and cracked- replaced with glass. LED reflector was water/weather damaged. I knew, I could not just cut a cone out of metal and make it work. After several searches, I found your KZbin page and followed the directions. D1-21mm D2-57mm H-35mm. Final cut was on aluminum flashing (roof repair, etc.). Polished inside to mirror finish and fastened to inside of old reflector :) Thank you again !
@JetManJoe5 ай бұрын
Nice 👍
@petarpetrov44185 ай бұрын
I use the same method for years and works perfect.
@Warunapriyantha81-ql8hr5 ай бұрын
❤❤❤❤❤❤ from sri lanka
@Sammy_Buildz5 ай бұрын
Very nice! Looking forward to seeing your work mate. Do you build turbojets for people if requested???
@JetManJoe5 ай бұрын
At the moment no I don't, but in the future you never know, I might end up selling the ones that I have built for myself. I generally build things for the new experience then sell them to fund the next project. I'm soo pumped for the new year and what this build will become.
@Skylos1005005 ай бұрын
Cool
@va7entino465 ай бұрын
Thanks man , im doing lots of exhausts for my bikes by hand and its painfull and slow and never perfect but with this it will be easier
@JetManJoe5 ай бұрын
Best of luck with that 😁
@va7entino465 ай бұрын
Thank you a lot , i will make this thing to help me roll cones , thanks a lot
@JetManJoe5 ай бұрын
Too good. This will make rolling cone so easy mate 👍its worth the little time it takes to make the snubber attachment
@rohanevergreen6 ай бұрын
damn thats actually sick
@JetManJoe6 ай бұрын
Cheers mate its all coming together. Lots of parts has been ordered and are arriving now. Got some time off in January to build this beast
@BlobbyCHEZ6 ай бұрын
Keen to see this happen!
@JetManJoe6 ай бұрын
You and me both buddy ✈🚀
@wolframschweier33076 ай бұрын
I made a snubber using your video as guidance and modify one to fit my slip roller. It works as you advertise.
@JetManJoe6 ай бұрын
Great stuff
@CarholicBG6 ай бұрын
Hi, as far as I can see you could form a perfect tube with a slip roller. Is this correct?
@JetManJoe6 ай бұрын
Hi CarholicBG, you can roll sheet metal into a cylinder but are limited to a certain diameter. With my slip roller the rollers are 60mm in diameter so the smallest I could probably form a cylinder down to would be around 70mm. Also thickness of the sheet metal is restricted to 1.6mm but with a small piece I could roll 2mm.
@brocksterification6 ай бұрын
Yahoo! What turbo is that?
@JetManJoe6 ай бұрын
It was donated to me and the owner didn't know much about it as it was sitting around for years. What I can tell you its estimated to use 6lt of fuel a minute with an Afterburner, putting out around 200 pounds of thrust.... The compressor inducer is 118mm..
@timharris32036 ай бұрын
Change our your batteries to lithium batteries and knock about half the weight off.
@JetManJoe6 ай бұрын
This is purely just a test stand for running the new jets on and refining the design. Also going to build some pulse jets in the future and test them on it. Weight doesn't matter.
@BlueEyedColonizer6 ай бұрын
Instead of making it out of alminnium, you should make it out of aluminum 😂😂😂....Love from the US😂😂
@JetManJoe6 ай бұрын
Potato tomato 😅 now subscribe lol
@KjllShot6 ай бұрын
Yep! That's a sub from me! 😂👌 Can't wait to see how it turns out!
@JetManJoe6 ай бұрын
You and me both. Can't wait for the looks I will get when I 'transport' this on the back of my ute. 🤣 Putting an after burner on it too, it will down about 6 litres of fuel a minute.
@BlobbyCHEZ7 ай бұрын
I've had this exact square for 30 years and it's been straight every. single. time... You are delusional if you think it could go out of level this is the best one of the market
@BlobbyCHEZ7 ай бұрын
This is awesome, I felt like an old man sitting on his porch watching his neighbour weld So keen for your jet go kart!!
@JetManJoe7 ай бұрын
You sit on your porch watching your neighbours.... creepy 😄 glad to have ya apart of the journey mate
@BlobbyCHEZ7 ай бұрын
@@JetManJoe only the cool neighbours 😎
@JetManJoe7 ай бұрын
@@BlobbyCHEZ pml 😄
@brendanwalllis7 ай бұрын
if you think that a brand new combination square is accurate, well you'd be wrong
@JetManJoe7 ай бұрын
Well my one is spot on... maybe buy a better one
@brendanwalllis7 ай бұрын
it wont be for ever though, just think about how its made,,,. better to get an engineers square@@JetManJoe
@JetManJoe7 ай бұрын
@@brendanwalllis I got several different squares, I just used that one cause it fit better against the blade for the video. And for me personally I'm OCD and can't help but check everything twice. Cheers for the comments.
@djhago31237 ай бұрын
Them square's are rarely square..
@JetManJoe7 ай бұрын
This one is good, got a few different squares and all the same
@djhago31237 ай бұрын
@@JetManJoe flip it over to check if it draws the same line
@JetManJoe7 ай бұрын
@@djhago3123 like I said its perfect, no problems with this one at all. Flipped it over and still matches previous line
@JetManJoe7 ай бұрын
Thanks for the comment though, would be a good thing to mention in my video
@djhago31237 ай бұрын
@JetManJoe I always have to check mine..I just use a roofing square now and a sliding one for doing margins
@s.e.75787 ай бұрын
Good job. The application has the ability to print a pattern, do you not use this function?
@JetManJoe7 ай бұрын
Thanks, I did use the print function but didn't mention it in the video. Now people will know
@ElThomsono7 ай бұрын
A thing of beauty.
@JetManJoe7 ай бұрын
Simplicity
@mfpitci7 ай бұрын
Go for shaft drive mate, not hard to do. Will the drag strip be long enough for the speed you want? with thrust plus AB?
@JetManJoe7 ай бұрын
Shaft drive would be next level... The drag strip is 1/4 mile and just for fun, I don't think it would be long enough to get to top speed, even with an Afterburner.
@mfpitci7 ай бұрын
@@JetManJoe Yeah that was my thinking the 1/4 wont be long enough. I'm sue you have seen John Wallis jet kart.
@JetManJoe7 ай бұрын
@@mfpitci No I haven't. I've been following Andy Morris
@Turbojetkart7 ай бұрын
the record is trust powered...... plan is to build a shaft power unit with the second of the two engine I am building
@JetManJoe7 ай бұрын
Well that will keep you busy. As if building one isn't time consuming and hard enough. Good work mate
@jttaylor31847 ай бұрын
Great Vid Joe
@JetManJoe7 ай бұрын
Cheers mate
@eastbayrayful7 ай бұрын
Its all good a true artist is only recognized after they go mad, die or they find someone that will make money from them 😂
@JetManJoe7 ай бұрын
Mad Man it is then 😂. Maybe that should be my channel name MadManJoe pml
@JetManJoe7 ай бұрын
Full video in this link kzbin.info/www/bejne/hXnbpJ1qepaUrdE
@mohammadghaddar92128 ай бұрын
You didn't post the next video rolling it to a cone shape thank you for your content loved it.
@JetManJoe8 ай бұрын
The next video to roll the cone is here buddy. Glad you enjoyed it. kzbin.info/www/bejne/nXm8o6GXnpqEbcUsi=8p2qiODhrPFp9x23
@TheReaper18 ай бұрын
Great video! Make a lid and you got yourself a nice smoker too!
@sdguy558 ай бұрын
This is a crime against humanity that this video only has 104 views.
@JetManJoe8 ай бұрын
Thanks I worked hard on this video. KZbin is a bit like that one mate who doesn't get the joke, then 2 months later laughs uncontrollably when no one is around.
@BlobbyCHEZ8 ай бұрын
Best video I've seen all month! Keep it up legend!