www.realcarbontastic.com/how-to-order It’s a really nice feeling steering wheel 👍🏼

If you’re looking for the exact bolts I think these may be it: www.cjponyparts.com/cj-classics-bumper-bolt-kit-deluxe-1965-1968/p/HW579/ Hopefully that helps 👍🏼

Ugh I have those I need the ones you already had with the old bumper when you pulled it off there 4 bolts

Thanks for the reply tho 🫡

What was the time marker for the ones you were looking for? No problem 👍🏼

6:42

Hey what’s up man yea I still this on the evo. It’s been ok but been giving me problems with keeping the radio stations saved. Might be a motherboard battery issue but I think they may have upgraded ones that you can get with 8gb+ of RAM. It is a nice upgrade from the stock radio for sure though 👍🏼

@@JeffSongCars gotcha, thanks man. Just ordered mine and yea it’s the 8g android 11 version (crossing my fingers I have no issues lol ) Will use your install video once it gets here. Love the videos bro! Thanks

@soulomuas4408 congrats on the purchase! I think the newer version is way better so you got this 👍🏼 thanks for the support 🥳

Wow that price is steep over there! DIY is always the best option for oil changes. Are you going to be doing any other mods yourself now that you have a scissor car jack? Thanks for the support 👍🏼

@@JeffSongCars Yes, my second car is a 2013 Audi A4, which still has a 3.0 Turbodiesel engine. It needs quite a lot of engine oil, but at least it’s relatively simple to change. Only the automatic transmission is a pain. I also do the oil changes on my father's Lada Vesta (quite rare, but at that time importing Russian cars was cheap; it has around 80k miles on it and has never had a problem) and on my brother's Fiat Punto. I quickly saved the money for a car jack, especially because a typical Step-Tronic oil change for the Audi A4 costs literally 650€, which is around the same in USD. The scissor car jack was around 1800 USD; it's an SF-K2800 Autolift (a German brand that does the job very well). Still, the Lancer is my favorite. There isn't too much inside that could break down, and with the AWD, it's perfect for here in the Alps. It's just so fun to drive on snowy roads. It needs care and is not the most fuel-efficient, but it's worth everything I spend on it. My second option was a Subaru Impreza WRX with 230 hp, but Subarus here are just too mistreated and would have needed a gasket and timing belt change. Meanwhile, I got the Ralliart in perfect condition-I've never seen anything like it before. The first owner literally did 14 oil changes in 60k miles, all signed by a Mitsubishi garage. You could tell from afar that someone took great care of it. I just had to buy it.

@sad_wrangler8515 wow lots of very different cars! It’s always fun working on different types to see which are more efficient and you can use that info the buy cars in the future. I agree that the fuel efficiency isn’t that great on our cars but definitely is a fun car to drive. That scissor lift sounds like a very good investment and I’m thinking I might need one too haha 😆

No problem! I believe I got them from cjponyparts.com 👍🏼

I believe that fuse was something optional, not too sure but I may have put in a different fuse for the slot it goes in from another mod I did. My bad I completely forgot about adding that part in during the video!

@@JeffSongCars Its all good ,as u mention ,I did not need at all , just plug as u did and workout good ,Thanks ! O/

If you’re talking about the one on the bottom at the 3:50min mark that’s the wire for the emergency lights and should be near the bottom of the Tesla styled screen on the back side 👍🏼

Oh man that was a good idea! You got a pretty rare car haha nice 👍🏼

@@JeffSongCars Thanks man haha. As I am sure you know, there's certain things that haven't been fully developed yet for us Mitsubishi Enthusiasts. I'm a little bit picky and that I need both horns equal and perfectly centered. The grimmspeed bracket achieved just that. I do enjoy your video and I think you did damn good job getting your horns centered man 👍 I'm running the same horns brother. All of my buddies run the reds. I gotta change it up, which is went with the yellows. I actually left one of my factory horns mounted and connected, that way when I lock my car all I hear is a little beep. When I slam on my horn, then the super tones activate 💥 🤙

@@Shim_Shack_Studio Thanks man 😁👍. I really do appreciate the support! That's a pretty good idea for the stock horn... hmmm I think I may have tossed mine somewhere to be found years later lol. I do like the sound of ours though 🙌

It no longer works and you will have a light on your dash saying something’s wrong, it’s been a while so I forgot which light but if you’re trying to get smogged it may make it so that you would fail smog

This car fits the definition of classic 😎 thank you for the support! 👍🏼

Still looks the same but I’ll definitely try updating as soon as I can, been busy and trying to catch up but I’ll try to update ASAP! 👍🏼

The low beams seem normal for mine and turn on with two flicks but the drl seems correct and is on the first flick. Check to see if you have anything else spliced in if you did any other electrical work because the low beams being attached to the e brake doesn’t seem right

I wasn’t able to sadly, whenever I tried doing the highbeams something would start smoking so I most likely will be rewriring the whole car. I’ll try to get back to uploading asap! Thank you for the continued support 👍🏼

@@JeffSongCars appreciate that, currently trying to put the exact same headlights you got on your car on my 67 mustang, issue is i'm too worried i might cause irreversible damage if i try to splice wires in an attempt to get that halo light working.

Yea it seems the old wiring is very prone to receive damage. You might be able to use new wires for the slightly older/worn out looking ones. Let me know how it goes! This is going to be a long project haha@@TheBucketDude

Thanks for the continued support man!👍👍 I'll try uploading as soon as I can, just trying to save up to buy some more parts 🤣

I’ll try uploading as soon as I can, might take a bit of time though. I really appreciate the support 👍🏼

Thank you I’ll have to look them up 👍🏼

I ended up getting a new clock spring from the stealership 🥲

That makes sense haha now I know, thanks 🤣👍

No problem! Oh yea I definitely do that all the time and have to fix the old stuff 🤣

www.ebay.com/itm/131200540740 That was the site before but it seems they are out of stock for now, hopefully they restock soon!

@@JeffSongCars thanks. hope they can ship to CA heard stuff that they couldnt

I’m located in CA as well so you should be able to get them if they haven’t changed their policy 👍🏼

They def sound better than the stock horns 👍🏼

Definitely better to invest in a torque wrench hahah yea next time I’ll definitely invest into one 👍🏼

Thank you for the encouragement! 👍🏼

The high beams aren’t bad, I think they use the main lens so good output 👍🏼

I believe it should work for the base models as well 👍🏼

No problem! I definitely know that feeling 😅

Thank you! Yea sometimes you just have to break out the breaker bar 😂

Thank you for the kind words 👍I've just been trying to save up enough to keep working on the cars haha. It might take a bit more time but I will definitely try to update ASAP 😁

@@JeffSongCars Hey do you already have a set of headliner bows for your 68 Mustang.

Yea I think I have them somewhere but they’re all at my parents place so gonna have to rummage through my parts haha

Hahahha yea they’re really bright, the turn signals are still pretty visible though. In the video the turn signals are a little bit dimmer than irl 👍🏼

This is where I bought mine off of: www.amazon.com/FLYUNICE-Navigation-Mitsubishi-2007-2017-Bluetooth/dp/B088GJ65WV/ref=sr_1_2?crid=14SSVJEPTYV03&keywords=evo%2Bx%2Btesla%2Bscreen&qid=1698032475&sprefix=evo%2Bx%2Btesla%2Caps%2C140&sr=8-2&ufe=app_do%3Aamzn1.fos.2b70bf2b-6730-4ccf-ab97-eb60747b8daf&th=1 There may be better ones now though so check up on that 👍

@@JeffSongCars thank u 🫡

Thank you for the support! I had a really bad year last year with four grandparents passing, I will really try to update more often! I really do appreciate the support, thank you!

Glad to be of help! It’s definitely a nice upgrade 👍🏼

Hello! I got it off of ebay www.ebay.com/itm/174702226688 👍

I got it through a set on amazon. This is the link to it 👍 I think its a 3/8" tube though. www.amazon.com/gp/product/B00CJ5DZE2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

To each their own 👍🏼

Very meticulous hahaha I get too lazy to do that 😂

Glad to be of help! 👍

Ohh that makes sense! Yea it was kind of hard to get the stuff off haha. Can’t wait until the car is done! 😅

Yea haha I changed it a while ago to the APR big wing 😂

😂 Hahaha I put it so that the jacks had the most weight on them and the Jack was slightly holding the weight 👍🏼 but yea the jacks are the backup!

Thanks for the support I really do appreciate it! I'll try to make a comeback, been super busy lately! 👍

It came as a set I believe 👍🏼 Motive Products 0107 Power Bleeder 2-Quart Tank with Hose and Adapter, Compatible with Mid-Late Model Ford Vehicles a.co/d/8EwUQSS

Yea it does fit I tried it too because I was curious haha 👍🏼 the pitch should be the same for the threads

@@JeffSongCars thanks for the feedback !

amzn.to/3wRgT3V Is where I bought it but there may be better ones by now! 👍👍

Ahh.. do you have the JDM evo?

@@JeffSongCars yes my dude iv looked and locked but can't find a rhd version

@@R4VENCREST Damn at that point it might be better to make a custom head unit maybe with a tablet. Try reaching out to the companies and see if they make a RHD version

@@JeffSongCars I will mate thanks love the videos BTW

😂😂😂