You need a longer barrel for better accuracy. You were at 55 yards. The end of the barrel was at 20 yards. If you can get that barrel to touch the target with a longer barrel, I think the accuracy would be hole in hole.
@Malick_ibn_dinar3 күн бұрын
😂😂😂😂😂
@2cthetruth3 күн бұрын
So with the Bushpig, if you fill it to 4,500 and it warms up, during mid day, how do you know what you are actually shooting at (pressure) and wouldn't that be pretty dangerous?
@2cthetruth3 күн бұрын
So if the air expands or contracts while out hunting dependent on the temp, you will have no idea what pressure you are actually at and your POI will act accordingly? And they want over 2k for this gun?? No thanks.
@2cthetruth5 күн бұрын
That’s over $30k in fees in that picture. Ridiculous. Go get a pig for a fraction of the cost from a good butcher. You want to shoot something? Go to public land and do it for free.
@kluper11575 күн бұрын
20 MOA Rail!
@kluper11575 күн бұрын
what size Threads on that Barrel?
@kluper11575 күн бұрын
no Soup for you!
@Malick_ibn_dinar7 күн бұрын
This guy do sell pellets
@kluper115710 күн бұрын
Did it so awesome!
@b-radr-ing307411 күн бұрын
sorry for your loss
@oldmancrypto619014 күн бұрын
Are you demoing the Long Strike or the standard 45 Rattler and is there a difference in size of Ammo you can use across the two?
@Donatello4097314 күн бұрын
My Hammer wasn't holding air , so I shipped it to Arizona from Marxist Massachusetts 😢 , and Umarex paid shipping both ways and fixed my rifle perfectly. That's GREAT customer service , and it was done for free . 😊
@ahandymanishere15 күн бұрын
Thanks for your video. Do you recommend this for hunting deer, and if yes, at what max distance?
@ifeetz761220 күн бұрын
Ok listen. Just came in from shooting the Meg! It is not only the bolt pin, this is very aggravating. I was even a little below 4500 psi, maybe about 4300, and the first 4 shots pooped out of the barrel, WITHOUT THE BOLT HANDLE! I have not shot anywhere near enough through this gun to need a new hammer spring so that is NOT the problem. Now, it is even being inconsistent on me. Guess I will fill a 4500psi gun to 3800-3900psi. Pisses me off though!
@motownoldes22 күн бұрын
🔥🔥🔥🔥😎🔥🔥🔥🔥
@tokirahmad23 күн бұрын
Please activate supert thanks , for supporting you …. Nice job. Thx for sharing. God bless u hunter heart ❤️:)
@back_roadsairgunning220023 күн бұрын
Who was the 2nd personon FB to congratulate me on my first Wisconsin Airgun Whitetail Harvest ? Yup somehow Mr Bob got wind of me taking one with his 385 grain hollow points :)
@MRojas-dw7oq23 күн бұрын
Thank you very much for being so specific and making these videos, it cleared up a lot of doubts for me. Thank you for doing the homework since I don't have a chronograph. Saludos 🇨🇴
@AgustinMorales-z7c27 күн бұрын
Hello sir, I am a fan of Argentina, I wrote to your email asking about your slugs since in my country I don't get them, I have an AEA .30 7.62 32 barrel
@MrSniper200727 күн бұрын
You got me sold on this rifle rhanks for suggesting it when you replied on facebook about it im super impressed
@gradycollins4782Ай бұрын
Bob what's the longest slug that will fit?
@gradycollins4782Ай бұрын
What is the maximum length slug you can use in this?
@hurricaneaquaticsАй бұрын
I've had the full length Hammer for a couple of years now, yet to shoot it 😢. Anyway, the full length Hammer is a very short rifle to me. I can't imagine how short the carbine is.
@kluper1157Ай бұрын
How Many shots with Round balls?
@kluper1157Ай бұрын
Does it Real Make it Backyard friendly?
@kluper1157Ай бұрын
Can i still get some of the same slugs? 150 Long nose
@mikekupetsky6879Ай бұрын
Who makes that rifle I think I need one
@Mrhollowpoint1Ай бұрын
@@mikekupetsky6879 www.bintacllc.com
@derrickmitchell-k6kАй бұрын
Hey there, Sir. I need your opinion. I want to put a 36 inch. 1:16 twist rate TJ barrel on my West. Ratt .357. My goal is to get longer ranges, more power, and increased accuracy. Tell me what you think. Thanks.
@BigbopperairgunsАй бұрын
I'm sorry to hear that you lost a close friend. I hope you feel better soon. What you do for the airgun community is truly unmatched. I can always rely on your videos to answer my important questions. Thank you!
@overreved1Ай бұрын
You shouldnt have to mess with this gun but its an AEA
@overreved1Ай бұрын
I had one of the first Bin tac Aea nothing but a rattle trap. POS . I so want to get rid of it.
@brettwilliams8837Ай бұрын
Another great video. Thanks for sharing. BW Columbia, MO
@acsaenz1Ай бұрын
I just another video that said that AEA leak air. Sometimes it might be a small leak and some are larger leaks? Is the true?
@corywebb5537Ай бұрын
I love my Megalodon 50cal. Just tried some of your slugs for the first time the other day. Niceee
@donnieclayАй бұрын
Any air leak issues? How long have you had it?
@corywebb5537Ай бұрын
@@donnieclayI've had it a few months. With a 235grn slug. It's really. Powerful and accurate. I shot targets regularly once or twice a week, maybe more. But if I Go a week or so without shooting it might drop from 4500 to 43-4200psi. Which isn't bad or much or hard to top off.
@donnieclayАй бұрын
@@corywebb5537 I appreciate that. What I’ve learned over the years is any leak is unacceptable and typically gets worse. Thank you for the reply.
@corywebb5537Ай бұрын
From what I've heard and I'm not talking bad about them because I love my A.E A it's one of my most powerful air guns. But from what I heard a lot of them do have a very slowly leak. Surprisingly my hatsan blitz 30cal. DOES NOT LEAK AT ALL!😂 I love them both. I wouldn't consider something like a very slow leak, a deal killer even though. I understand your concern with that issue. I think with any company.It's kind of hit and miss when it comes to that. Air guns can be funny like that. You can get four of the same kind in the same caliberand each one might Work better with a different ammunition. Also from what I understand with the slow leak situation.It's usually ones that have a back tank as well. And I did notice if I take that back tank off which is also the stock, And hot swapable. It doesn't lose air. Something with the a e a, and back tanks maybe
@MichaelKnight-cf5jxАй бұрын
Hey Mr hollow point can you barrel swap the 510 lss to 457 less or smaller
@kluper1157Ай бұрын
so are you still shooting 250 Bar? or 3000?
@gradycollins4782Ай бұрын
3600 psi
@dennishedrick5308Ай бұрын
Does the rifle have a moderator built in? Is there a capability to put on a DonnyFL moderator. Thanks D-Man
@claudecashbigcashmoneyАй бұрын
494 fit mine perfect. I had to stomp 495 in there
@LaneAWDАй бұрын
What scope is that?
@jonh7766Ай бұрын
What moderator is that and what adaptor? Thanks
@CreativeFishDesignsCharlotteАй бұрын
been so long getting one of these next
@ifeetz7612Ай бұрын
Hey buddy, I heard that you had to file down your bolt handle on this gun, so you could get full power from a full fill of 300 bar! I shot my megalodon without the bolt, and it worked wonderfully! But now I need to file down where it was rubbing. Did you use a small flat file or a round file? I have learned a lot from you, thanks!
@seinameАй бұрын
it is possible to change the size of the barrel? looks so long for me
@randywilliams7972Ай бұрын
modify the bullet not the mag.
@adrianscuba989Ай бұрын
The “Masalo cuff” helps with tennis elbow.
@jesusisalive3227Ай бұрын
Love the boattail on that 280gr.
@chriswilliams228Ай бұрын
Mr. Hollow point I'm very much interested in obtaining a 82 Cal. Can you direct me to a website that Sales 82 Cal Rifles if possible. Thanks
@Mrhollowpoint1Ай бұрын
@chriswilliams228 at the moment only XP-Airguns is building the 82 cal
@chriswilliams228Ай бұрын
Mr. Hollow point I'm very much interested in obtaining a 82 Cal. Can you direct me to a website that Sales 82 Cal Rifles if possible. Thanks