John Deere dealer told me on my 14sb that wheel bolts need to be tightened to only 10 ft-lbs torque. You can wreck the wheels if tightened too much. So guy's take it easy with the ratchet/air gun!

Great video. Thanks

Great video! Thanks!!

you didn’t say what year, or are all years the same setup?

Dull chain, blowing dust

Can you order a non rev for a Dolmar 510sp ?

I inherited the exact same one from my father. Just needs carburetor cleaned, pull start fixed + probably a new battery. Ha ha. But ive jump started it many times with car. Tires slow leak, key ignition works still i guess. Bought an aftermarket ignition. I'll find out. Have had tranny completely apart. Seems to be working fine. Put new bearings in for front tires. Automatic shut-off under seat doesn't work because it got wet. So i cut wires. New drive belt, shorter so it'll never come off, good used blade put on. Damn ive worked so much on this sob but Bottom line is i wanna keep it goin. Proud of what ive learned about it. Would love to get it bored out too. More horsepower I guess.

I know this is an old video, but I just picked up a John Deere 14SZ with a like new rear bag that the previous owner never used for $25 on a local quarter auction. The Briggs and Stratton engine runs great. He just mulched his lawn with the rear door closed. Only thing wrong is the worn out front and back wheels and I’m thinking I can fix them on the cheap. Thanks for the 411…!

Gdzie można znaleźć instrukcje obsługi do tego modelu?

Need triger

Needs to be leaned out.

You should install a barrel clamp anyway,I used a magpul clamp

I think century makes them

I don’t care for reviews on old snow blowers

زننتززز ف ى لص ثى صل

This was exactly what I needed, thank you! Inherited one from my dad and I love it but it’s getting old.

This is a good unit, my wife bought me one some 20 years ago for Father’s Day, it has operated great and I have only done routine maintenance, replaced the pull cord and now I think I need to replace the pull starter. Go slowly when you’re using the vacuum, the leaves tend to bunch up in the elbow tube before it enters the bag.

I bought mine in 1999,beat up pretty bad but still runs strong.

Just bought one for $20. It has the bag. I have to replace the shift cable. ($12). I'm cleaning the carb, tank and replacing the fuel line. And new oil, of course. That's it. Very happy.

Do a vid on replacing the metal drive gear on the metal spline rear wheel..including circlips and woodruff key!

Mine mows so nice! The neighbor compliments on it quite often.

You running out of breath making a video??? You should pick up a shovel every now and again.

Where do you but bags for this mower? I have the same one and I'm struggling to find a bag to fit

does anyone have a link of the grass bag where I can purchase ?

Can you get some camera holding skills down at before you make a video get seasick watching this thing

Is that deck adjustable for different heights

Stop knocking the dealer. When you need a part for "maybe" once in the life of the mower it's not worth the effort to shop for hours on end to save $5. And remember, the "web store" doesn't have it all, and you need to buy from the dealer so he/she can stay in business. If you need that part the "web store" don't have that sells for $10 ... and the dealer has closed down, all of a sudden you've got a $500 machine sitting there pretty useless for you. I own one of these mowers, selling price new ... over $1,000,00 ... and that was 20 years ago. Bought mine from a retiree moving south. If you own a premium mower, expect premium prices as their parts cost more to make.

USING THAT SNAP-ON IS WHAT BLOW OUT THE BARRINGS

I have one but it won’t charge no more??? My snap on dealer said it’s discontinued. Is there anyone know how to fix or a video or where to take

a classic video from when you used to call yourself "Cyberdyne 24"

Omg man I couldn’t take any more of this video

This video just prooves that it's impossible to say Blade Break Clutch, without slowing down and individually annunciating each word.

Have you got any info on clutch adjustment? I just picked one of these up.and my clutch has about 50 percent slack and not enough tension to release the belt from the drive pully. I see where the rear end of the clutch rod where it's connected to the cotter pin is very loose and the hole is shaped oval.

I've had same machine for 23 years.. still starts like day 1 ...money we'll spent...$1100 in 2000

Not sure why everyone on video makes such a big deal about showing the gun is unloaded? The only person at danger is the person on the video since as far as I know no one watching a video has been shot while watching it. I would assume the presenter has checked if it is loaded or not for their own safety? Or is this to cover themselves from those untight people watching who would point out that the presenter did not check if the weapon was loaded or not on the video? I know we live in a strange new world.

I have the EEJP201MBK which is the black one, the first time that I charged the battery to 100% it came up on the screen a message saying "battery overload/ disconect 12V/USB charger", following by a beep sound, after trying it again i notice that all the ports stopped working, but if i plug it back to the wall it works again, so im thinking that it pop the overload protection or maybe it burned out the input, does any one know what is the fix on the overload protection? or how to reset it to make it work again? it turns on and everything but when i turn the ports on it started beeping, so i took it to the snap on truck technitian hoping they would fixed it for me and the guy told me that they discontinued making those, that there is no fix and that nobody had ever found out how to fix them, that i had to replace the li-ion batteries and that they cost more than the engine starter itself, that it is a headache to find those batteries and that there is nothing i could do about it, but i cant believe that, there should be something to make it work again, any ideas?

if you could place the unit in a cradle, you wouldn't be chasing it all over the place..harder work than it needs to be? I am watching this as I want to trace the wiring to/from the kill switch, without having to dismantle unnecessarily.

Svaka čast

Svaka čast

my grandpa owns one. I didn't realize you could get a loader attachment for it. he has the front blade for it though

HOW DO YOU CHANGE THE AUGER BELT??

I wonder how much money was saved by using the lock nuts instead of welding discs to the metal flights and than drilling and tapping them?

You talked way to much.

I bought a used one last year from a small engine repair shop. Buddy told me it was all tuned up. It starts just fine and works great but starts missing after running some 10 minutes. I changed spark plug but no success.

Do you still have this welder? I just bought the same one used. Im trying to get it going. The gas line inside is not hooked up. Im trying to figure out how to connect it to a gas tank.

I'm a retired mechanic and have been resorting toros for resale and scored a young snow commander, wow I'm keeping this beast for myself, if you haven't seen one in real life, it's a Beast!

Handless.....

Eletric start .

👍👍 bagus

Thanks, I just replaced all 3 paddles and scraper bar. I can’t get this thing to push forward. Any suggestions would be appreciated, TIA