two_inline

Пікірлер

@shanew7361 Ай бұрын

Can you lock tne drive and auger down so you don't have to continuously hold them down?

@MrFatboy1987 2 ай бұрын

How to drain the water from it ?

@Beautiesbysandy 6 ай бұрын

I got 1 a week ago and after 30 min on . Started beeping and shows me P1 on the screen . is it normal? (I read that means to drain water. ) but I don’t think is normal every 30 min 😢

@MellizaVilladores 7 ай бұрын

My insignia portable ac doesn't have an excess water while cooling

@Sumaydha97 7 ай бұрын

I just got one and do I need to refill water .. I dunno how to do that

@Jayson-xn7js 7 ай бұрын

Refill water?

@Sumaydha97 7 ай бұрын

@@Jayson-xn7js Yh

@michellemelton5692 7 ай бұрын

Are you able to leave the screen on the window or do you need to take it off?

@two_inline_sixes 7 ай бұрын

@@michellemelton5692 screen stays on nothing goes past the plane of where the window skids up and down

@youtubebros 7 ай бұрын

I like how you explained this, very rarely they mention this in CV azles. Can you tell me what it sounded like driving?

@JJj-k7n 7 ай бұрын

Do you happen to know what size hose I unfortunately need a replacement

@KierstinStewart 8 ай бұрын

Mine was making a loud rattling noise straight out of the box…not sure why?

@juneoliver1253 8 ай бұрын

this is happening to me! what did you do?

@KierstinStewart 8 ай бұрын

@@juneoliver1253 I haven’t figured it out 😩

@diebruders2205 8 ай бұрын

Plug your fuse taps into socket 46 or 47 for acc (HK4 yellow cable) and socket 27 (yes, it's empty by default) for constant power (HK4 red cable). That way your Dashcam switches to parking mode after 6-10 minutes (whenever the lighter sockets go offline). Did two X3s (2018&2022), works flawless...

@two_inline_sixes 8 ай бұрын

There you go folks! That's what I did. I know they're right next to each other on middle along an outside row.

@golarrylevel 9 ай бұрын

Thanks for the video, it was helpful seeing how you did yours. Much appreciated.

@two_inline_sixes 6 ай бұрын

I'm glad it helped!

@straightpipediesel 10 ай бұрын

Birds died 🤣

@MrSpiritmonger 10 ай бұрын

I'm thrilled to say I successfully used your video to install a Viofo 229 duo in my 2021 BMW x3!! Your tutorial was super helpful, thank you for walking through each step, otherwise I'd be so toast. The Viofo works perfectly! The setup is so clean. I broke a few trim clips in the process and gotten some fiberglass splinters from headliners, but boy is it satisfying! Thank you so much @two_inline_sixes and @itswhips for your advice and suggestions!

@two_inline_sixes 10 ай бұрын

Wow that's great to hear!

@MrSpiritmonger 9 ай бұрын

@@two_inline_sixes did you have a problem where the cover of the trunk arm snapped in half? similar to video, i took off the cover, feed the wire with zip tie, then put the cover of arm back on, but when closing, the cover broke :( not sure what i am doing wrong (i gave extra wire length so there is no tension and room for movement)

@two_inline_sixes 9 ай бұрын

@@MrSpiritmonger I didn't but if I remember correctly that cover is two pieces that clamps into it. If it isn't two piece it's a three sided U and needs each side pulled outward to lift off. If you gave slack give it on either side of the arm but not in it.

@MrSpiritmonger 11 ай бұрын

Wow I am inspired to try it out on my X3

@itswhip 11 ай бұрын

Happy to say that I followed your lead and the install went off without a hitch. You did gloss over how you got from the B pillar to the rear, but it was simple enough--just had to remove the C pillar moulding (one T-25 screw involved) and fish it through. The shop I use quoted me 4 hours to perform the install to the tune of $600!! The whole thing took me just over 2 hours, so I just want to extend my thanks for saving me some money and giving me the confidence to pull this off on my own. Cheers to you, sir!

@two_inline_sixes 11 ай бұрын

Wow, that's great to hear! To be honest I wasn't sure there were any other bmw drivers who would diy a dashcam and if this video would help anyone. I'm sure you know what I mean. Especially when it comes to modding. If this was a b58 supra the forums and community is unreal for JDM but bmw is not the same as it is for classic bmws.

@itswhip 11 ай бұрын

I'm not kidding. If this video didn't exist, I'd be $600 lighter. If you end up at the Maple Grove Bimmer show next month lunch is on me! @@two_inline_sixes

@MrSpiritmonger 10 ай бұрын

which ground point did you use? I'm doing it right now, not sure which one to use.

@two_inline_sixes 10 ай бұрын

@@MrSpiritmonger I think I used a screw I found new the fuse box under the glove box. I just backed the screw out a little, tucked the wire in (be sure to loop it around your screwdriver so it's circle shape to confirm to the head of the screw).

@itswhip 10 ай бұрын

@@MrSpiritmongerIf you go to 17:06 you'll see a 10mm nut back there on painted metal (I think that's the one I used..), about center screen, toward the top. I removed that nut, scratched the paint from the metal where the nut would seat, and used that for my ground. Worked like a charm.

@evanstauffer4470 11 ай бұрын

Very impressive, but please ditch the "music". Also, why are the tires mounted backward? Chevron tire tread is directional.

@two_inline_sixes 11 ай бұрын

Will do, hang tight! The tractor handlebars rotate depending on accessories and in this configuration it's for snowblower, woodchipper, broom, sicklebar, etc low traction stuff but when we use rototiller the handlebars go the other way then the tires are right and when in really tilled soil then it totally helps. Great point.

@two_inline_sixes 11 ай бұрын

Reuploaded

@mattmckinley69 Жыл бұрын

Mine is making the same exact noise right now 04 jeep Grand Cherokee 4.7 V8 thought it was loose timing chain myself or broke tensioner still have no clue what it is

@TKM11370 Жыл бұрын

Thanks so much for taking the time to shoot and edit this. Really appreciate your work.

@TopherHax Жыл бұрын

Your fuse taps used the wrong location if it shuts off after only 6 minutes.

@grek282 Жыл бұрын

Which one are the right ones then?)) can you send a link with description? Searching for it now.

@MrSpiritmonger 10 ай бұрын

The cigarette lighter next to cup holders do turn off after 6 minutes, so that seems correct fuse.

@two_inline_sixes 6 ай бұрын

I've had no issues

@Andy-w8r Жыл бұрын

Those fuses on my g01 are always live… I just want an ignition live… can’t find one at all

@two_inline_sixes Жыл бұрын

Are you sure you have the exact fuse locations? They are ok for me

@Andy-w8r Жыл бұрын

Yeah. The cigarette lighter stays live all the time. Tried it overnight still live in the morning.

@robinsonsauto Жыл бұрын

I’m not saying it 😄

@Nbaker8883 Жыл бұрын

Mine says it has heat but when I turn it on heat mode it still lets out cold air

@two_inline_sixes Жыл бұрын

There's no heat there's dehumidifier, fan only, and ac

@poofart69420 Жыл бұрын

mine retains so much water and makes the room feel a little musty sometimes i just got it and everything is perfectly clean

@two_inline_sixes Жыл бұрын

Got to drain it if it's that humid

@FastRedPonyCar Жыл бұрын

Great reference video. I'm picking up an F97 in a couple days and have a vantrue N4 Pro waiting to go in.

@noamgorfinkel7349 Жыл бұрын

I need a new hose/pipe for mine which type should I get?

@JJj-k7n 7 ай бұрын

Did you ever find out

@extrabaltaa Жыл бұрын

is there a way to keep recording in parking mode without shutting off after 6 minutes ? Thank you for the video.

@two_inline_sixes Жыл бұрын

Yes with an external battery like from blackboxmycar

@FastRedPonyCar Жыл бұрын

@@two_inline_sixesI got my Vantrue installed but have the battery box going to the 12v plug. Do you know which fuse I can tap for always on power? My multimeter is acting up. For the rear cam I found it a lot less hassle to run the wire along the lower trim. I also installed a Radenso DS1 radar detector with the BlendMount up under the rear view mirror.

@two_inline_sixes Жыл бұрын

@@FastRedPonyCar nice. Someone said the fuse I used was constant power. Maybe it is but my camera has a setting I can't remember

@two_inline_sixes Жыл бұрын

@@FastRedPonyCar was revisiting comments and re-read yours. The battery will charge when vehicle is on so you want switched power. The battery kicks in when car is off so it keeps recording but if you wire it to constant your deplete your car battery and camera parking battery.

@diebruders2205 8 ай бұрын

@appleztooranges Жыл бұрын

Nice! How you like it today? I just got one

@two_inline_sixes Жыл бұрын

It's good read my other comment reply for an honest review

@melodyshortmusic Жыл бұрын

Thats so fast

@PhotographerPhilosophy Жыл бұрын

Sandisk Ultra cards will destroy your dash camera. Try the high endurance or extreme pro cards. There are countless videos on KZbin explaining why ultra cards suck and will break your camera

@two_inline_sixes Жыл бұрын

Oh really? Thanks for the tip. Oddly, this is the one blackboxmycar support recommended. I noticed my dash cam is always hot I'm going to change it and see if that helps.

@two_inline_sixes 6 ай бұрын

I bought the card you recommended. I haven't had issues with the old one but I'd rather not find out! Thanks for the tip

@randalcurtis6667 Жыл бұрын

🤘 Promo-SM

@two_inline_sixes Жыл бұрын

What's promo am?

@RebelHawk420 Жыл бұрын

Been thinking about getting one of those for my mom's house

@two_inline_sixes Жыл бұрын

I like mine our AC went out so this is in my bedroom. I like that it has a bigger fan for higher cfm than other same sq ft units.

@Tigresantos82 6 ай бұрын

@two_inline_sixes I have the same thing, it makes a lot of noise

@cupofkratom Жыл бұрын

you can find a youtube short on anything now huh

@two_inline_sixes Жыл бұрын

and yet here we are 😂

@youtubert3138 8 ай бұрын

Yes, mediocre world.. they monetize with nothing, and artists or people with serious content struggling for views… but justice always win

@robinsonsauto Жыл бұрын

Great review and installation! Looking forward to seeing more content

@two_inline_sixes Жыл бұрын

Issue was bad motor mounts and fan was hitting shroud

@two_inline_sixes Жыл бұрын

Update- we know it is the fan hitting the shroud due to bad motor mounts

@robinsonsauto Жыл бұрын

Good catch

@two_inline_sixes Жыл бұрын

@@robinsonsauto lol YOU found this! Will the Wiz

@MedicatedOMO Жыл бұрын

I used some STP with ZDP and that rattle went away. Around 2 years ago and it has not came back yet.

@Neutsie Жыл бұрын

Harmonic balancer

@maniacalmonster2293 Жыл бұрын

Now just add a nice exhaust tip to bring it all together.

@two_inline_sixes Жыл бұрын

I got to start posting again it's come a LONG way.

@two_inline_sixes 2 жыл бұрын

yeah gasket or your manifold is not fully seated, trust me it can look seated but there's even a gap a few widths of paper big it's going to get extra air and rev like heck. You need to wiggle the manifold as you get it close to the engine and also notice there's holes on the manifold that nipple guides from the engine have to fit into. That is what got me as one of the guides didn't fit in the hole.

@octaviovelazquez7347 2 жыл бұрын

I just got the same High rev using the banks headers and gasket ima try that FelPro one out hopefully it fixes the issue, you added silicon as well?

@jhow3d688 2 жыл бұрын

Can you share the part number of the down pipes that you used?

@two_inline_sixes 2 жыл бұрын

I used magnaflows website vehicle fitment drop down boxes. I had hitting with front divr shaft so I did new motor mounts since mine were shot

@jhow3d688 2 жыл бұрын

@@two_inline_sixes this is exactly what I’m afraid of. Do you think the problem is better or worse being lifted 3 inches? How hard was it to change the motor mounts?

@two_inline_sixes 2 жыл бұрын

@@jhow3d688 bleepinjeep does a great video in roughly 10 min how to change them. The garage you inspect it at can do this cheap as i6 are easy access with lots of engine room. The hardest part is installing the pipes, you need another person under with you to hold while you reach and try 100 times to line the flange bolts up without cross threading.

@markmello1366 2 жыл бұрын

Would have loved to hear the final results

@two_inline_sixes 2 жыл бұрын

Check out my other videos!

@vernonz8897 2 жыл бұрын

𝓹𝓻𝓸𝓶𝓸𝓼𝓶 🤔

@tonyv7589 3 жыл бұрын

Looks like no performance gain at all 🤷

@treyshayscott-moore8727 3 жыл бұрын

2006 Chevrolet Silverado 1500 Extended Cab Work Truck 4X4: Exterior Colors: Summit White/Dark Blue Interior: Ebony Black Engine: 5.3 Liter Vortec V8 Exhaust: 1 Flowmaster 40, Single In Dual Out (0:27)

@_1fine99jeepgrandcherokeewj 3 жыл бұрын

Control arm ball joints. The tortion on the axel produced by the drive train puts strain on that ball joint. Mine is bad, needs replacing. I thought it was my sway bar, the bushings on it were adding to the problem but it’s the control arms

@two_inline_sixes 2 жыл бұрын

Slip yoke eliminator, that's what my issue was.

@_1fine99jeepgrandcherokeewj 3 жыл бұрын

Control arm bushings, ball joint on diff for boomerang control arm

@revolutionday1 3 жыл бұрын

If you don't get the DynoMax kit for this motor, you're screwed.

@richardshortridge8052 3 жыл бұрын

I've got the same thing but no cats...4x22 tips

@automotiveperformancemobil4030 3 жыл бұрын

3 years later ... what was the actual problem?

Ең жақсы KZbin

Пікірлер