2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@johngranato2673 3 күн бұрын
Good video! IMO, the REVV 1 FS has much better fit, finish, and materials--just slower, looks better, too.
@jeffz9287 18 күн бұрын
Where can I buy the plastic box for under the frame? I've a frame but not that part
@Jah_Newgen Ай бұрын
How much will it cost all together
@sdbonmarc8793 Ай бұрын
Awesome video pretty entertaining
@1DumbSquirrel 2 ай бұрын
id use them for like flashlights just one cell
@Lovedestroyer-j1x 2 ай бұрын
im building a cs20 or square tube frame, i got in contact with someone that makes pouch cell batteries and he hooked me up with a 72v71Ah one so i can basically order any motor since it can handle every motor, cant wait to build this monster
@hec8049 2 ай бұрын
Hey! How much of an issue was overheating because I see you made 2 gaps on both sides to cool the controller. I live in NY so the weather isn't very warm when it isn't summer so I don't know if that will be an issue. Is it usually warm where you live?
@samjohnson517 2 ай бұрын
@@hec8049 it was not much of an issue, maybe on some really hot days or a lot of hill climbs or constant high speed riding , but the slots I made definitely helped keep the controller cooler. I live in Southern California so it does get hot here in the summer.
@hec8049 2 ай бұрын
@@samjohnson517 Ok, nice. Thanks for responding.
@RB-uy4pn 3 ай бұрын
This beast is only $1,299.99 Certified ReNew ( w 30 day return policy and 2 yr warranty from Epson.) No brainer folks
@tossancuyota7848 3 ай бұрын
bruh just after 2years ago theyd recommend something like this to me why youtube?
@rup3rt752 3 ай бұрын
Just bought 1 45ah 72v 12000w 2600$
@THEANOINTING432 4 ай бұрын
I wanna build one so bad…. Help🤦🏾♂️
@THEANOINTING432 4 ай бұрын
Is it able to pop wheelys?
@samjohnson517 4 ай бұрын
It will but it's difficult and unstable with that high-speed motor, it does not have a lot of torque, the wheelbase is long and the bike is very , so it will wheelie but not like what you can do on a Suron.
@THEANOINTING432 4 ай бұрын
💪🏾
@irish....2197 4 ай бұрын
So yes for the rear wheel...there's a good hub with a 175-190mm drop out that fits muchbetter
@charlespringle3552 4 ай бұрын
Did you notice any difference in range?
@samjohnson517 4 ай бұрын
@@charlespringle3552 no not really
@MichaelJHathaway 4 ай бұрын
Hahaha
@kevinduprey9326 4 ай бұрын
That new mantis bike for 3k is 😧 crazy... Could you build it for that as consumer? And its known brand... Maybe this will force other companies to compete... I would love to build my own but that rrar mantis is tempting... It will get police attention tho... Love your content 👍
@nancynobullets85 4 ай бұрын
A Karen is a racist white woman. If she isn't being racist then that's just some woman
@kevinduprey9326 5 ай бұрын
Did you ever see the Kandi ebike ? A Popular channel destroyed it and disappeared. I believe the frame would be to your liking. Definitely is not a tall riders bike. Looks fantastic . Too bad bikes and beards finished them.
@samjohnson517 5 ай бұрын
@@kevinduprey9326 yes I remember that, the frame was similar but I think it might have been a really bad copy. I think the bikes and beards channel gave it to the pizza delivery guy for a tip lol
@kevinduprey9326 5 ай бұрын
Is it just me or does the bike look incredible with hollow empty belly, no battery or anything inside it?…. Looks great filled too.. great job
@chessesniffer 5 ай бұрын
Hey guys I’m having trouble building mine a bit the bike is taller then I am I have 26x4 tires with 220mm rear shock and height is 5’ 9” any suggestions what size should I put for the rear suspension
@actionroom9226 5 ай бұрын
do they make a carry case ?
@samjohnson517 5 ай бұрын
@@actionroom9226 not that I know of, mine did not come with one but I'm sure you can find something on Amazon to put it in.
@actionroom9226 5 ай бұрын
@@samjohnson517 charger is great i mounted it to my wall
@hacker1011000 5 ай бұрын
what pluise dose it use from output to xt90 plug ?
@katiekumcgil 6 ай бұрын
they supply 2 sets of torque brackets we used one on the inside and one on the out side
@samjohnson517 6 ай бұрын
@@katiekumcgilmine only had one set in a later video I just ended up bolting it together with no spacers I've had no issues in 5,000 miles.
@katiekumcgil 6 ай бұрын
@@samjohnson517 AWESOME thats good distance with no hiccups ,i used a crystalyte hs4065 rd notor so actually had to get axle extenders to fit the drop outs it was the fastest motor i could find that still lets you run 7 speed casette and i worked out a way to put a 500watt bafang front motor onto the through axle forks,you can see a video on my chanel how the build ended up with the modified suspension
@burnthedead13 6 ай бұрын
I'm 5'4..could I comfortably ride this?
@samjohnson517 6 ай бұрын
@@burnthedead13 I am 5'8 and I am barely flat-footed (both feet flat at a stop ) when it sags from the weight of sitting on it. try a mountain bike with an extra large frame and you'll get an idea. You can ride it it's just that when you stop you're probably going to lean over a little and use one leg to hold it up.
@rasmus1600 6 ай бұрын
It sounds like Donald Trump with a good vocabulary, idk how to feel about it
@joserobinson8419 6 ай бұрын
I just bought one at the hobby shop all black
@kylejacktucker 6 ай бұрын
How much can i trust getting a keyu 5 frame off aliexpress?
@samjohnson517 6 ай бұрын
Hello, I have personally had really good luck with AliExpress if there is a problem they will get involved if you contact them.
@akbarrusyd4629 6 ай бұрын
TOO MUCH TALKING !!!!!!!!
@petersvideofile 6 ай бұрын
Hey Man I'm curious in the manual "UsersGuide_EHLS500_EN.pdf" it looks like at 1080p the max refresh rate is 60hz (which has a pixel clock of 148.5 Mhz). But they also support resolutions like 2560x1080 @ 60hz (which has a pixel clock of 198.0 Mhz), and 3840x2160 @ 60hz (which has a pixel clock of 594.0 Mhz). Given it's obvious based on the fact it can play 3d blurays the LCD's function at 120hz, do you have any idea why it doesn't support 1080p 120hz? Is the HDMI front end just not designed to accept anything above 60hz? For gaming have you managed to get it to do 1080p @ 120hz using CRT (custom resolution tool) or anything like that?
@glidersarecool 6 ай бұрын
It probably ruins.. if you look on the side it says it charges three types of batteries...
@kanogomez5063 7 ай бұрын
I just bough the same bike las Saturday and u got play on the head set...i cant get it to tide...and the stem tube is long...im going to cut it like you did....she ride good thiugh..💪🏽💪🏽
@ShaunRichards-oi9hn 7 ай бұрын
Hey my friend, my name is Shaun. I live in Simi Valley. I have the same bike wondering is there a way to fix a flat back tire without having to disconnect the cable from the battery or controller?
@samjohnson517 7 ай бұрын
Absolutely so long as the cable is long enough, it should be zip tied to the swing arm,you have to cut the zip ties that should give you enough cable, just remove the rim and lay it down next to the bike and change the tire from the non-wire side.
@ShaunRichards-oi9hn 7 ай бұрын
I’ll give it a run. I have three of the bikes all together. I have two for sale for 3500. I’ll send you a couple pictures.
@michaeloherlihy2418 7 ай бұрын
I would only ues it for the road
@michaeloherlihy2418 7 ай бұрын
How you avoid the cops see you go 40km
@DavidCharles-wi4qr 7 ай бұрын
Replace all those Allen head screws with thumb screws. It's a few bucks.
@samjohnson517 7 ай бұрын
Yeah I thought about it but the problem is they would stick out and I would constantly bang my knees on them. It works on the other frame because the area where the thumb screws are located is recessed.
@anio6865 7 ай бұрын
Will this charge a 48v lithium ion battery ?
@samjohnson517 7 ай бұрын
There are options when you order the charger so you would just order it for a 48v.
@petersvideofile 7 ай бұрын
Great review thanks for this :) haveyou tried to play 3d blurays on this? Im curious if the flicker is visible on the active glasses.
@samjohnson517 7 ай бұрын
I only tried it once with Avatar it was pretty good but it ended up giving me a headache LOL. I kind of see why that technology is going away.
@petersvideofile 7 ай бұрын
@@samjohnson517 Thanks man :) Yeah I'm trying to figure out if its 120hz or 144hz active shutter glasses frequency used for it I'll contact Epson
@Hunter918-98 7 ай бұрын
Which 1 is best for taller riders 6'3 and above..i seen 1 but i was too big for it.
@samjohnson517 7 ай бұрын
The frames are all pretty much the same they don't seem to come in different sizes. I'm 5'8 but my seat post is all the way down and then I'm barely flat-footed. I would say get whatever frame you like and then adjust all the other parts, for example get a longer rear shock instead of 190 mm get a 220 or 230. And maybe longer front forks.
@gasisthepastendoil 7 ай бұрын
cool
@rolandroland1485 8 ай бұрын
7:35 is the exact reason I went with the cs20 and the 17” wheel eventho I am 6”3, easier to take upstairs and load into my highlander …. The cs20 is the lighter frame since IT’s aluminum I got a 5000/8000w motor, fardriver 150a and 50ah Samsung cells 200a BMS battery shipped to NY for 3100$ …. Very excited!!!! But I have to wait 50 days 😭
@voodoochild6741 9 ай бұрын
I wanted to ask, that CS20 frame looks exactly like the ESTRAPZ Cyclone bike. Is it the same ?
@samjohnson517 9 ай бұрын
I can't say for sure but it is common for these companies to use readily available frames, . I mean you know what they say; if it quacks like a duck and walks like a duck.......
@voodoochild6741 9 ай бұрын
@@samjohnson517 True that.
@LostLeftyLimb 9 ай бұрын
You know you can change the screws right? They make all types of screws with the same threading.
@El_Guap 9 ай бұрын
Thanks for the content. So you put the shorties on the back... but didn't change the front. How does that affect handling? I understand all the coil shocks take some time to break in. Did you find that?
@samjohnson517 9 ай бұрын
Yes the front stays the same we don't notice anything different with the handling really, I don't know if those things are ever going to get less stiff LOL I mean they're okay, way better than stock.
@samshepherd4232 9 ай бұрын
How do you take the rear wheel on and off? Heard I need to disconnect some of the electric cables, got no idea what I'm doing when it comes to electronics. Never seen you do this in the video so missed the most important bit. It's nice to know if the Hub motor broke I would know how to replace it or a basic tier change.
@samjohnson517 9 ай бұрын
Well if you're just doing a tire change you do not have to disconnect the wiring you can remove the tire from the side of the rim that does not have wiring. If you are changing the hub motor then yes you will need to disconnect the wires that run to the controller, there will be three large wires and usually two plugs.
@samshepherd4232 9 ай бұрын
@@samjohnson517 okay thanks for that I'll bear in mind for future
@bigb69ti 9 ай бұрын
2 years later how is it holding up? so far this is the best build kit video i can find on utube. i am thinking about building one. is it even worth building price wise? that much cheaper?
@samjohnson517 9 ай бұрын
Hello thank you for watching, yes it's holding up great 4600 miles no major problems.
@Cr0zzAlpha 10 ай бұрын
Oh they were all similar frames..
@offgridlivingstlucia8865 10 ай бұрын
Good day sir quick question how tall is those bike
@samjohnson517 10 ай бұрын
Seat height on the Enduro is about 34 in of course it's sags down a lot when you sit on it and the onyx is about 33 in
@offgridlivingstlucia8865 10 ай бұрын
Thanks for replying back I scrub to your Chanel
@muka7044 10 ай бұрын
I have a tiny bend in my rear rim i cant almost see it and im scared of it imagine with that bend you have on ahaha how was doing did you changed the rim or something?
@samjohnson517 10 ай бұрын
Yeah mine's bent in a couple of places , I just hit it with a rubber mallet to straighten the edge.
@mebigusmall123 11 ай бұрын
Can you show pedals on these for legality reasons