Just got a nail in mine first day riding, so I'm getting broke in quick
@HarleyDavidsonHeaven14 күн бұрын
I bought a 2024 DR650 in January and I’m enjoying the heck out of it! I have upgraded it for both on road and off road use, it’s a beast!!
@pilotdane114 күн бұрын
Dude - That's awesome !!!! It's the best bike I have ever owned. Haven't ridden much this summer - Just small rides - but it's like 115° ish today. Can't wait 'till it cools down a little & can get back out to the desert. Congrats man !!! Very cool !!! Cheers !!!!
@tieoneon161428 күн бұрын
Just got a new KLR ADV and love it. Coming from enduro's, I always liked the DR and XR just wanted wind protection this time. We know why they cant update the carb, and thats a bonus for traditional riders. But I think if Suzuki made an factory ADV package like the KLR, with rally fairing, windscreen, luggage cheaper it'd be a hit cuz of that motor
@pilotdane128 күн бұрын
Hey man - Thanks for watching LOL !!! - Just re-watched it before commenting - This is a terrible video haha... Typical for me I guess. And BTW - Years ago I was not a KLR fan, but have since changed my tune. A buddy of mine has (or had) at least 3 - and he loves them. They're a bit bigger than the DR - But "bullet proof" as well.... If you ever watch my "best dual sport on the planet" (or whatever it's called) forgive me for my "ugly" KLR thoughts !!!! Cheers !!!!
@jalengeneblazo1772Ай бұрын
I need to do this to my honda. Would you say use the hairdryer every single time?
@pilotdane1Ай бұрын
I don't remember doing every time - but that said - can't hurt !!!! Good luck !!!!
@half_cockedАй бұрын
Just tried using this and I must have a defective glue or stubs… I cleaned with the supplied release agent, even cleaned with alcohol, put a huge globe on and it would not pull my dent , no where close to what you did… left it on for 10 minutes even and would come right off with the slightest bit of screwing on the bar… maybe my dent is just not able to be pulled with this but thought mine wasn’t even as bad as yours lol, the small one hardly held at all the bigger round disc held a little better but I tried an entire stick and a half and maybe 15 times and don’t see a difference in the dent
@pilotdane1Ай бұрын
Damn Bro !!! - you saw my results - and don't get it... Not sure of the bike - maybe thicker metal ??? For what it's worth they do make better glue sticks than come with the kit.... may be worth a try ????
@half_cockedАй бұрын
@@pilotdane1 I’ll try, it’s a Harley tank with a small dent maybe size of a 50 cent piece, no paint crack or anything, I’ll check into better glue
@Doug_MorganАй бұрын
Love listening to Rush in your vids. I grew up in the 70's listening to them in high school.
@pilotdane1Ай бұрын
thanks Brother !!!! Love RUSH !!!!!
@ravenmoon11652 ай бұрын
No longer available.
@stubabyfuora52802 ай бұрын
You really should try kenda 270, they look very similar but 270 is more sticky off road and on road but and this big butt, the kenda is only good for a few thousand miles in good conditions
@danutpopa84852 ай бұрын
Hello. I lost the adjusting screw, I don't know how it looks. Can you take a picture of him for me please?
@danutpopa84852 ай бұрын
Hello. I lost the adjusting screw, I don't know how it looks. Can you take a picture of him for me please?
@pilotdane12 ай бұрын
I will try tomorrow - sorry for the late reply....
@danutpopa84852 ай бұрын
I don't even know what diameter the ball is. If you unscrew the screw and take some pictures, maybe you have a measuring tool, measure it, you can also measure the ball, please. Thank you very much for the help.
@pilotdane12 ай бұрын
@@danutpopa8485 Dude, I've got the lift on a table - and I just don't know what you are looking for, and I don't want to take it apart.... Is it on the outside, or does it require tearing it all apart ????
@danutpopa84852 ай бұрын
@@pilotdane1 Hello. It is the screw with a flat head, which adjusts the stroke of the descent pedal. Are 2 screws next to each other, it is the screw on the right. Unfortunately, it has to be taken out. With the jack down, no oil flows.
@scotthinton46103 ай бұрын
Overall I wasn't impressed with the kit. I didn't use the magnetic bolt, in fact, I sheared it (didn't read, silly me for thinking it would be a load bearing bolt as originally engineered by Suzuki). Ended up epoxying to the rotor. Doesn't sit well with me that they would replace a load bearing high torque bolt with basically nothing... Had a hell of a time with it before finally gluing it. Oh, and no plug for the Speedo worm gear hole? Sheesh.
@pilotdane13 ай бұрын
scotthinton4610 - Ya, I got ya - There are aftermarket things, like spacers and shit for the old speedo - but have to say mine still works fine & I really like it. Still riding all the time. I just pulled out the speedo cable & filled it with silicone..... I appreciate you watching. If you watched my (long winded video) - I think they could have done better with "the dashboard" - but hell, it's been over 3 years - The newer stuff may be better.... Cheers Mate !!!!!
@nova11304 ай бұрын
Great video,What size did you go with on the front?
@pilotdane14 ай бұрын
I still have them - AND I still have the "stock" front tire - But I went with the "widest" I could get.. 3.00-21 - I hope this helps.... let me know if you need more info !!!!! - BTW - After about 3000 miles, they are "cupping" really bad on the front - because of street riding - But I still love them off-road - and they are not terribly expensive.... I would get them again !!!!
@tahbloomis4 ай бұрын
Why not keep old plug in and cut wires and connect both wires together
@pilotdane14 ай бұрын
Either way - I try and not cut the wires if I can. Making that little "jumper" was easy !!! If needed - I just pull the jumper out & plug them back together...
@eugenebarron6924 ай бұрын
Just bought a 2024 dr 650 last week love it so far I watched a ton of videos before I purchased.
@pilotdane14 ай бұрын
CONGRATS !!!! - I did a ton of research as well. The "Ausies" sold me, as it is the Premier Bike in the "Outback" !!!! Cheers Mate !!!!
@ratchetboo5 ай бұрын
You're the man dude 🎯
@pilotdane15 ай бұрын
wowee !!!! Thanks Man - Old video - THE MIGHTY SUZUKI DR 650 still running like a Swiss Timepiece !!!! Cheers Mate !!!
@garytong33957 ай бұрын
Great video😊. Just like my garage, bits of hand towel, radio going (Hooty and the blowfish) etc. Keep riding and stay safe man😊
@pilotdane17 ай бұрын
Thanks so much !!! - Happy New Year !!!! Sorry about the length of the video, but I appreciate you watching and commenting !!!!
@Handirifle8 ай бұрын
Well so much for not changing "a f#@$*g thing".
@bobryan54968 ай бұрын
why!!! the music! stupid!!
@gregs86068 ай бұрын
I've owned 2 dr650's in my life.ive put a total of about 100,000 km on them. The first thing I did was put in a carburetor JET kit to let it breathe easier and the power increase was huge, but fuel milage went down of course. Next I put on a braided steel front brake hose which gave the front brake way more bite and much better modulation(feel) WHATEVER YOU DO ONLY USE GENUINE SUZUKI BRAKE PADS ON THE FRONT DONT USE AFTERMARKET BRAKE PADS TO INCREASE STOPPING POWER, AFTERMARKET BRAKE PADS WILL EAT UP YOUR FRONT DISK
@pilotdane18 ай бұрын
Thank you very much for your comment - I'll be getting me a steel braided hose for the front brakes - I have not done that yet. Your advice is appreciated !!!!
@udmbfckx29169 ай бұрын
La Villa Strangiato! Live! Then Spirit of the Radio
@pilotdane18 ай бұрын
FNA BROTHER !!!!! - Love RUSH !!!!!
@Nonplused9 ай бұрын
I think I want one. I have a KLX 250 now which I love off road, it is light and the suspension is great. But it lacks jam and is not good at highway speeds. The DR 650 is only 30 lbs heavier but has near twice the torque and horsepower. The KLR 650 on the other hand is way heavier, which off road is a real problem. Of course there is always the KTM 500 exc-f or the CRF450L, but those are a whole different class of bikes in terms of cost and maintenance. And exhausting to ride. And really tall.
@pilotdane18 ай бұрын
Thanks so much for watching - obviously, I am way behind on my emails. Like I tell everybody - do as much research as you can - The "Aussies" sold me, as it is the PREMIER DUAL SPORT in the "outback" - and I have been riding a long freakin time !!! It is the best bike I have ever owned. Reading your comment - I'd like to also mention the Honda XR 650 - But even at 6'1" - I can barely get one foot on the ground - they are really tall too - but still an awesome bike. definitely an 80/20 bike... More for off road... If you have the chance to visit a dealership (at least here) sit on several models, and the choice becomes very clear. THE MIGHTY SUZUKI DR 650 is just an awesome "basic" motorcycle - and easy to work on too !!!! Cheers and good luck on this journey - if you lived near me, you could take mine for a spin !!!!
@altg57089 ай бұрын
You started turning the knob farther and quicker than you did on the previous times, even though you didn't ever do 1/8" turns.That might be why it took off the decal and paint. Before you were slow and 1/8" turns. Last one you turned it faster and 1/2" or more turns. Good video.
@benjamin.taylor14 күн бұрын
nice observation, I think he went too fast on the second one towards the end
@ioandragulescu60639 ай бұрын
switched recently from a 2019 650 to a 2023 1050, the road version not DE and I'm having a blast. Still sad to see my old bike up for sale at the dealer, hopefully somebody will buy it who will appreciate it properly (and all the damn upgrades it has :)) )
@pilotdane19 ай бұрын
That's awesome - The guy in the video (VERBAL WIDGET) had just bought that - but now he just got a V Strom 1000 - and loves it too !!!! Great on the highway !!! He sold his 650 too !!! Cheers !!!
@ioandragulescu60639 ай бұрын
@@pilotdane1 small world :) I don't know, I got to ride a bunch of bikes, 790 and 1290 KTMs, an 890 duke, a tracer 9 (all loaner bikes while mine was being serviced) and while being amazing bikes, none of them made me want to swap my 650 until I rode the 1050. It's just like the 650 but better, better brakes, more power, nimbler surprisingly and now it has cruise control and quick shifter (and a lot of small details I won't go into), nothing more I could ask for. I hope your friend will enjoy the 1000 as much as I enjoy the 1050 :)
@pilotdane19 ай бұрын
@@ioandragulescu6063 He loves it !!!!
@queenslander9549 ай бұрын
Yea mate it’s not so mighty , I’ve replaced dozens of rockers & cams on these things because of the terrible engineering where the camshaft runs directly on the cylinder head without bearings , worse case scenarios was sending the heads sent out to engineering shops to get bearing shells that they should have had in the first place.
@pilotdane19 ай бұрын
I don't doubt that - But I love mine. 8 years now - Runs like a Swiss Timepiece !!!!
@Handirifle9 ай бұрын
Nice demo video.
@pilotdane19 ай бұрын
Why thank you kind sir !!! - Usually, I get my ass chewed... Then I boot them out of the man cave LOL 🙂 Cheers !!!
@hegemonictrader459 ай бұрын
That star wars pizza cutter is pretty sweet! Believe it or not I just finally got around to watching the Star Wars movies within the past year. Knocked em out within a week 😂.
@pilotdane19 ай бұрын
Mario !!! - I can't believe you watched this... Holy cow !!!! Thanks, but boring as hell !!!
@hegemonictrader459 ай бұрын
@@pilotdane1 hehe 😜 good chatting with ya buddy! Again appreciate ya reaching out and helping too. Have a great weekend
@pilotdane19 ай бұрын
@@hegemonictrader45 You too Mario - my pleasure !!!
@hegemonictrader459 ай бұрын
@@pilotdane1 just uploaded a video riding today after tuned jet kit install. Still gonna try 2nd knotch on needle yet.
@igotakai56449 ай бұрын
Thanks for this, very helpful! Do you think there's anything that could have been done to prevent the removal of the decal/paint? I just bought a DR with ACERBIS tank installed and it also came with a dented OEM tank. Would like to make the OEM nice again but a bit worried now. Thanks!
@pilotdane19 ай бұрын
Brother - No matter what you do, this is a possibility, however, I think if I would have backed off a little sooner, I would have been ok. I'm sure you've done a fair amount of research, but some guys do it from the inside out. I tried it various times with absolutely no luck. I know I'm not much help, but good luck !!!!
@igotakai56449 ай бұрын
@@pilotdane1 Thank you! I've already scratched a few ideas off the list but this puller method is looking like the best one despite the risks.
@hegemonictrader459 ай бұрын
I just ordered procycles jet kit. I dont want to cut holes in the air box. I do have an aftermarket slip on exhaust for free flow. Would the 150 jet with needle on 4th knotch with snorkel removed work? Or should I do the needle on 3rd knotch from top? Please tell me your thoughts as youve been through it! Thanks!!!
@pilotdane19 ай бұрын
Sorry, but I'm not going to be too much help. There are just too many variables. I tried every jet & every needle setting until I hit the sweet spot. I will say this - Many things are "dependent" - Where you live, the elevation, etc. You are going to get very familiar with your carb. Start where you said - and take notes !!! - then take the needle up a notch, then down, etc.... It just takes time and experimenting. Unless you pay a shop to do it. BE PATIENT !!!! - you will be very happy once you get there !!
@hegemonictrader459 ай бұрын
@@pilotdane1 appreciate it boss! I seen where you went with the 155 or 160 jet on the 3rd knotch and were happy. But yea will start with stock settings from procycle and try with snorkel in and with it out. If need be ill drill but dont want to. Mine is a newer DR so im going to take out the whole pair valve system while in there and get rid of the emmissions canister also. The pig pops a bunch on decel now with the DGV2 slip on. And header really glows at night because of the emmissions bullshit. Can’t wait to get to it!
@pilotdane19 ай бұрын
@@hegemonictrader45 Dude, I'm excited for you - Big Time !!! I am not sure what elevation you are at - I'm at 1200' "ish" - But ya, 155 main... I don't think I have the "pair valve" deal. Mines a 2013... And ya man, if you don't want to drill out the top of the air box - don't. Probably end up with the 150 jet... Takes time to get the air mixture right too. I have a video on "tuning thoughts" I think... It's really pretty simple.... Keep me posted !!!!
@hegemonictrader459 ай бұрын
@@pilotdane1 I watched your vids and some others like 4-5 times over for this jet kit install 😂 I’m pumped. Ordered JIS bits also. I just took off the charcoal canister today and have a pair valve delete kit in the way from greece while I wait as i am de commie ing it. Stupid epa, haha 😆 Im in Upper Michigan. Got 6,300 miles on my ‘23 DR this year. Everything from single track, commuting to work, joy rides and long moto camping adventures the pig does it all!!! Oink oink 🐷 lol Hopefully all goes well before the snow so I can test\tune and let ya kno!!
@pilotdane19 ай бұрын
@@hegemonictrader45 Dude, that's awesome !!! - Way more riding than I do anymore. This summer just sucked out here in AZ - 115° almost the whole time. And ya, THE MIGHTY SUZUKI DR 650 is THE best bike I've ever owned. I've been riding since I was about 5 if you count "Min-Bikes" - I'm 62 LOL 🙂 Please keep me posted - I'll help any way I can... BTW, Mine pops a little on "decel" - but not terrible.... Runs like a Swiss Timepiece !!!!
@PaulKind3d9 ай бұрын
Things can absolutely compare to the DR650. They just do so badly. =D I wouldn't trade my dr ever. best bike ever hands down.
@sirguyfawkes87029 ай бұрын
Come on Suzuki.........sell it in the UK!
@pilotdane19 ай бұрын
Thank you so much for watching !!!! Send them an email LOL 🙂
@czrider39999 ай бұрын
Not trying to be a lil bitch but your boy Scoob probably learned this from a mid 1970's issue of Motocross Action magazine he found in his grandpa's tool shed. Ask me how I know. Yea, I'm that old. LOL.
@muriuwangai36179 ай бұрын
Nice video liking it from kenya
@pilotdane19 ай бұрын
Dude, "THANK YOU SO MUCH " !!!! - Too long, but I am so thankful for your comment !!!!
@TrustyZ90010 ай бұрын
A real "V" Strom, not a PStrom. Have the exact same XT Adventure but with blue accents. Just returned from a 2500 mile trip to the Sierra Mt. passes. Definitely overloaded and still pulled like a champ. Sonora pass, almost 10k ft elevation and one of the twistiest to boot, the DL was a blast. 85mph for hours on interstate 80, over 100 degrees F, and still got almost 50 mpg. Love these bikes. BTW, mine was $10.5K. I got ripped. Just kidding. For as long as it will last, it's a deal.
@pilotdane110 ай бұрын
Dude, that's awesome !!! - They are an amazing bike - "Bullet Proof" and will last forever !!! Great choice !!!!
@TrustyZ90010 ай бұрын
@@pilotdane1Been a while since I seen your channel. Hope the DR is well. Miss my '17 DR. Traded it , a '17 white DL 650 and $ for a new Z900RS. Missed the DL, so I bought a '22. Not the latest in tech bs, but I still admire it. New sub.
@pilotdane110 ай бұрын
@@TrustyZ900 Thanks Brother !!! All is well - May be putting up something soon, but it will be no big deal. Rode for about an hour and a half today... Just busy with my new job and "stuff"... Cheers Mate !!!
@ratchetboo10 ай бұрын
Great vid, good advice, amazing attitude
@pilotdane110 ай бұрын
Dude - Thanks so much. Had to re-watch myself LOL - Sorry I'm so longwinded, but thanks for watching ~!!! Cheers Mate !!!
@Vintageaudionagoya10 ай бұрын
I felt your pain. But nice work!
@pilotdane110 ай бұрын
LOL - Thank you very much. I think it worked fine !!!! Cheers !!!
@SteveB-hy2ci10 ай бұрын
Like the video but that music t
@pilotdane110 ай бұрын
Not sure if this is a good comment, or a bad comment - Not sure I got the whole message LOL - Cheers though !!!!
@SteveB-hy2ci10 ай бұрын
@@pilotdane1 it's all good but I was expecting a little different 🎶
@pzchannel644410 ай бұрын
Easy, cheap and works fantastic! Love it. Thank you for sharing, sir.
@pilotdane110 ай бұрын
Thanks so much - I still have mine, and always works !!!! Cheers Mate !!!!
@NutsNBolts2410 ай бұрын
Must be a newer bike, my 2001 dr650 just has a kickstand light. I put the kickstand down all the time while it's running, all that happens is the kickstand light comes on. That's in gear or out, though I of course put it in neutral before I get off.😏
@pilotdane110 ай бұрын
Thanks for watching - Ya, mine's a 2013.... Cheers !!!!
@albertkrzyszewski182311 ай бұрын
😂😂😂
@pilotdane111 ай бұрын
Thanks for watching LOL 🙂
@user-wk7dk5zz9x11 ай бұрын
Thanks for this quick video. It took me all of 15 minures to replace that seal with new one I had in my tool box.Thing works like new!!
@pilotdane111 ай бұрын
That's awesome - and hopefully this video was helpful. I still use my lift all the time. Bike is on it now actually - and It's still working on that repair I did about 3 years ago LOL - Take care !!!
@troybrake5686 Жыл бұрын
Who don't like Rush!!!🎉
@pilotdane1 Жыл бұрын
RIGHT !!!!
@pokyspud Жыл бұрын
Cool background tunes. Approved!
@pilotdane1 Жыл бұрын
Thanks brother !!! I'm a HUGE Rush fan !!! Cheers Mate !!!
@bouncingyellowskull Жыл бұрын
On Dr650 you need to use original bulb and not use LED, LED will only flash for left indicator and use orange fuel lens much brighter
@Mantic0405 Жыл бұрын
It's a beauty of a bike, proud that it's gonna be my first.
@pilotdane1 Жыл бұрын
SCHUTZ - CONGRATS FOR SURE !!!! I absolutely love mine. Been hot as hell here in the PHX. AZ area, but hopefully cooling down soon. Keep me posted !!!!
@jango67 Жыл бұрын
Will this work on both plastic and aluminum bodies ?
@pilotdane1 Жыл бұрын
All I guess I can say is I would assume so - as long as they are thin - Like the gas tank.... ???? Cheers
@randomlyTrees Жыл бұрын
Good stuff - just changed mine this morning and used this to check my work. Getting a little drag sound when I spin the wheel, but I think that’s not abnormal and the wheel spins pretty freely other than the chain hampering it
@pilotdane1 Жыл бұрын
RT !!!! - No pro, that's for sure, but glad it helped. Really pretty easy !!! Cheers Mate !!!
@randomlyTrees Жыл бұрын
@@pilotdane1 I’ve changed the front pads twice but, to my surprise, the rear were actually easier (I left the wheel in place). So easy I thought I forgot something lol
@urmikitchen20 Жыл бұрын
Nice sharing 🎉
@pilotdane1 Жыл бұрын
Thank you so much for watching !!!!
@jeffpotter7656 Жыл бұрын
What exhaust pipe is on your bike.
@pilotdane1 Жыл бұрын
Jeff - First thanks for watching. I appreciate it. That exhaust is off a 2015 GIXXR 1000. I have a video on that as well, however, it is NOT a mod for the "lighthearted" !!! Unless you know someone who knows how to TIG weld - It is much easier to just get a "slip-on" - WAYYYYYYY freakin easier !!!!
@Motoramblings Жыл бұрын
Beautiful bike!! Congratulations to the Verbal Widget!!!
@pilotdane1 Жыл бұрын
MOTOR !!!! - Thanks for watching !!! - He is super excited !!!! It's SPOTLESS !!!!!
@Motoramblings Жыл бұрын
@@pilotdane1 what a deal he got on that!!
@randomlyTrees Жыл бұрын
Great bike VW! I had my eye on one of these last year with way more miles for quite a bit more. You got one heck of a deal!
@pilotdane1 Жыл бұрын
RT !!!! - THE MIGHTY VERBAL WIDGET is just a JEDI KNIGHT when it comes to amazing deals !!!! He is super excited !!! Thanks for watching !!!