That method doesn't work for our style slider screen.
@andressaltos63310 сағат бұрын
Can you put a Pet proof screen on this type of door with that type spline?
@anav1404Күн бұрын
Thank you for the video
@THEREALRELL5 күн бұрын
My track is currently damaged. Why do you have to take the other doors off?
@TheTim16964Сағат бұрын
I believe they did that to get the sliding door off. Mine the door can come off from the inside. I will be leaving the stationary door in place.
@imperialphoenix5 күн бұрын
Another home owner able to figure out how to repair their windows thanks to a video on youtube. Incredibly appreciative of people and teams like yourselves who take the time to make these tutorials and publish them so that we can learn and then carry out these repairs. Thank you!
@integrags16 күн бұрын
Just what I needed!
@Statfan6 күн бұрын
Thank you this helped me, especially, pushing the broken pivot bar into the sash.
@melissalam51398 күн бұрын
I can’t remove the window. There is no room for that. I could change the channel balancer for my window in the previous house, but not this house. All windows are big that couldn’t be out of the frames.
@waynebinky12 күн бұрын
That technique works but is painfully slow. All you need is a 4" putty knife, a pair of pliers and side cutters. Using the pliers, grab the pile near an edge and pull up. Once it is out of the track, pull it at the end with the pliers. It will zip right out. New one install by inserting one edge and push the other in using the putty knife. work along the length like that. Cut to size when you approach the end and snap the last bit in.
@nathanjagneaux14 күн бұрын
Thank you!
@ranger231615 күн бұрын
Wow... well done! Do you know how expensive it is to get a repairman out to do this?
@johnhernandez313419 күн бұрын
Oh Andersen. What a hypocritical place to work at.
@davemichels265624 күн бұрын
Thanks it worked
@ameliajansky101026 күн бұрын
Any tips for when the latch is stuck in place and you cannot release the windows?
@jasonrhie3619Ай бұрын
Wonderful video.
@hellspiteАй бұрын
what a gorilla hammer and screw drivers as a punch!!!
@illusion2055Ай бұрын
After having no idea how to take out my windows that don’t tilt, this video finally showed me how to use these tabs! Thank you! Windows from the early 1980s, I had no idea.
@The3924Ай бұрын
This is a great video.Thank you so much.I'm working on a commercial door and this has been excellent.Very informative, very helpful.Thank you once again.Continue to keep making videos.Because there is people out hear that.Appreciate the videos.
@ReLiveANTHYАй бұрын
What type of window is that? American Craftsmen? Andersen?
@boydpendleton164Ай бұрын
I finally found this video and quickly reassembled the old window, where the balances had fallen out. Thank you!
@EZunigaMАй бұрын
I just received them today from SWISCO and installed them, thanks a lot for your instructional video.
@Lxxcky_Ай бұрын
so the "cut out" is man made Lmao
@telosfdАй бұрын
Unfortunately, when my drawer closes, it comes face to face with the back, there is no space for the plastic base to fit and the drawer don't close firmly. Nice equipment!
@marianarosa3380Ай бұрын
Showing the mechanism inside was key! Genius!!
@marianarosa3380Ай бұрын
Quick, clear and easy! Fantastic video
@glock-hm3roАй бұрын
Great video; I have 22 year old vinyl windows and the first one just broke...very helpful!
@lisac.4094Ай бұрын
I'm trying to replace the whole balance, but i can't get it out. The opening is too narrow. Any suggestions?
@alexradiches6001Ай бұрын
So happy I found this video...was able to use the old spline. Thank you!
@mtmind6560Ай бұрын
Awesome thank you soooooo much!
@phillipcreed79332 ай бұрын
Is your lock universal? Will it work with Milguard window? It seems the Milguard window lock has 2 locking mechanisms. The slide portion as shown. However my broken lock will not budge as it feels like it’s locked in place
@samarabevin2 ай бұрын
But what if your window is stuck IN the frame? I can’t even get to those parts 😩😩😩😩
@websterbrandcoaching97242 ай бұрын
I have been trying for days. These wheels do NOT snap in that easy. I've broken 2 already. Very frustrating when it's supposed to be so simple.
@SnakeDoctor3032 ай бұрын
The .250 screen spline im using to replace the metal with is extremely difficult to get rolling
@user-io3ty9fc9f2 ай бұрын
Can we add this device on any crank out window
@BillOfAllTrades20162 ай бұрын
I see a lot of negative reviews on these. It saysin the ones I looked at that for larger cabinet doors, multiple dampers are needed. I Just purchased some and will be making an install video later. If they don’t work with one then I’ll try two
@bruhinthewild2 ай бұрын
I can tell you for sure...it's not just coming off that easy
@JoyousOblivion2 ай бұрын
Preparing for my red seal and this video was clear an concise, thanks kindly!
@beesky86492 ай бұрын
This is the perfect video, you guys will be getting my business exclusively.
@artsal2 ай бұрын
The keeper is discontinued
@mctout94852 ай бұрын
Can it be install on a drawer?
@BillOfAllTrades20162 ай бұрын
Yes they can
@sandylove3892 ай бұрын
My glass sliding doors exactly like that one and with the little smaller cut out where the latch is supposed to pop out or should I say the teeth and you didn't test it you didn't show us how you lock it or anything well I'm going crazy looking for Maltese lock inserted internal mechanism I don't know I'm pissed off is driving me insane I got two brand new latches lock pull handle flush mount and they don't even fit in the damn door
@martinenobert38992 ай бұрын
I dont have any screws on my window how can I change it then?
@lisaferris12 ай бұрын
My balances do not work, do not spring down easily, and are actually stuck at the top of my window. have no idea how to remove them. I was able to get one out, that was partially out, so got the replacement balances - but how do you remove them when they do not "Spring" and are stuck like glue a the top?
@markkoenig62582 ай бұрын
You make it look easy. I have the balancer mechanism on order. Hopefully my installation will be as uneventful as yours! Thanks.
@saywhen19763 ай бұрын
SHOW HOW when there are NO HOLES DRILLED THOUGH??
@Poopy-Pants13 ай бұрын
Thanks
@clo135703 ай бұрын
I can't thank you enough for this video! I have 6 ripped aluminum screens from 1-2 year old Anderson windows and they are charging over $100 per screen. You just saved us hundreds!
@user-nr1nd2cc4w3 ай бұрын
Pvc window handle
@Bellaissupercool12343 ай бұрын
Flat and phillips screwdriver.
@lisaharrison43613 ай бұрын
Great job! Now, can you do the same with a concrete floor?