3000 series Massey is a good solid tractor, nothing wrong with them in my opinion. Excellent result there finding the problem in the electrics. I had a problem with the lift de activating itself on a 6270 no mater how many times you activated it with the rocker switch until it wouldn't activate itself at all, after a lot of testing wires and connections i found the wire plug connection was dodgy to the panel in the cab with the draft, height and lowering speed knobs on, someone had been working at it before we bought the tractor and hadn't put the locking nut back onto the multi pin connection, I tightened up the nut that held the pins in place and that was the end of the problem, simple fix but finding the bad connection is a different matter completely.

Hi ive got a massey 3635 and the rear linkage stops working intermittently the lights go off on the control box . Ive swapped the controll box from different tractor still no better. The pto and everything still work fine . Could it be the position control cencor ?

The black plug on the autotronic box has 2 crosshead screws which sometimes come loose. By tightening them, sometimes faults dissappear on their own.

hi mark i have a 818 and the bottom ends gone do you know how to get the sump off with the engine in suite

What happened to the videos Mark? Was really enjoying them👍

Hi Mark , are you planning on making more videos ? realy love the work you have done sofar and hope to see more interesting repairs.

Hi this is a great video. I have a problem with a cx90. Stuck in 4wd. Light on dash goes on and out. Was bogged and used dif lock also. Any suggestions appreciated

I SUBSCRIED FRIEND...THANKS ..BUT TELL ME I HAVE JOHN DEERE TOO 2040 ..BUT WHY YOU CALL HIM ''SHE'' ..JOHNY IS MALE FRIEND...

I have Massey Ferguson 3635. It shows transmission sign and battery sign on the dashboard and not moving forward and reverse . I change the new battery and transmission oil but still showing both signs and tractor still not moving but pto works good. Please let me know if someone can help, thanks

Hello, I have a john deere 3350 tractor and there is an oil leaking from the exhaust. What are the appropriate solutions?

Hi I've got a 9800hr 820 with a starting issue. When starting it winds over for longer than normal and even when warm isn't like normal. I've also noticed it's slightly pressurising the diesel tank seems to be going fine the filters are all recently changed. The only thing different is I've replaced the filter unit with the lift pump in it as the plunger shaft got damaged on it this could all be a coincidence or something I've done

Hallo I have a tractor exactly like this and it takes a long time to start, it doesn't matter if the engine is cold or hot, what could be the problem..?After it starts up When it starts it works perfectly, pulls well and doesn't smoke. thenx

Well done❤

Do you have the name of the place that refurbished your ecu? Much appreciated!

Hi, great channel and fantastic information 👍 I have a 6180 and i bought it last year it had manual forward/ reverse fitted. And when I got it home I only noticed it wouldn't go into low box when I shifted over stick. I still worked away in hi and everything else worked. But this summer when I started her the 1,2,3,4 sticks in 3,4 position. I'm still working it every day by holding stick over to right hand side before I start engine and I can work away around yard. Wondering can you shine any light for me?? Keep the good work up 👍

Hi Mark, may I know your email/preferred contact details. I would like to know more about what you do within the agricultural mechanical industry. If not that’s okay

Had the same problem, some years ago. The mechanic first meant it was the hydraulic sensor, later I found out it was the computer. Found someone who sold this refurbished computers, in exchange for my faulty one. It worked oud great, costs me around 400 Euro.

Hi sir how can i speak with you i have a some question please need your help

y'all ever get folk as don't pay on time? can be kinda tricky on ya own working for folks.

Good video, just subscribed. I had a go on a 22 RB up there four years ago kzbin.info/www/bejne/rImanmmei5VqbZosi=_YPPLWlDtxRuTHZG

Where do I start with error detection? Frog mode was difficult to switch on for a while, but now it can't be switched on. What could be the problem?

The question should be what did you buy the tap for?

Do u know how many hours the tractor had done?

Bet y'all got a drink outta that job! loving the videos over here in Kentucky man

I was expecting you to say Deere did a reman unit but obviously they don’t. I bet that lot wasn’t cheap Mark??

Tapper tap, looks about M50 😮 tight one to turn. £10 from a car boot sale.

You’d need a drum of oil to keep that tap lubricated

2inch tap. Paid £20 used. No idea what it’s for though! 👍

Obviously a tap Mark but I wouldn’t have a clue about price or application??. Another interesting video by the way. Keep them up when you’ve time 👍

Mark food for thought, save your knees,carhart makes pants with kneepads in them it will really save your knees on that concrete and anywhere else you work. They are very good pants.

Enjoyed that Mark. As I was one of your first subscribers, i demand longer videos……..😂

Great video it helped me diagnose the exact same problem on a 3085

More video!!!

Thanks for that video I own the cat 955l and am very pleased to see my friend Rob using it he traveled from dunoon scotland that day well done

Definitely going there. Looks great. A few more repair videos would be good Mark. I was enjoying them mate.

Very tidy top piece of work

Nice MF 590 let's see some work on her

Be careful I had to replace the spring because it had weakened look ok but compared to the new it had shortened and not give enough pressure on the clutch 👍

Another good one mate.

You done it again.what a great video

Hej from Sweden great video. We hade the same problem on a New holland tl80 its fixt now 😊

Great video mark, have a question relating to a similar problem, Neighbours landini vision 105 is stuck in 4wd, he claims it’s been like that ever since he jumps started jt this spring after it sat for a while , do you know how the 4wd works on this tractor. Light on dash registers switch being toggled but no noise of disengagement, how is the link between electric and hydraulic power made, is it just a solinoid

Why not try heat around the bolt before welding on the other bolt?

Coupling service ltd could have help you.

Thanks again for another fantastic video

The Zuidberg pronounce was alright, its from the Netherlands so for me its easy to pronounce 😂

Good job 👍 that was a dusty tractor you could see it in the torch light, and I was thinking he's breathing all that in, 👀👍

Your videos are excellent Mark. The thing is , they are real world. Much better than all the set up crap I’ve seen. Thanks for taking the time.

Very good video, very knowledgable 👍

Brilliant videos 🙌, where did you get your box of wire connectors? Looks like something I need!