Rhett H-S

Пікірлер

@FronkG Ай бұрын

Interested to get the kit for my NM pajero!

@rhetth-s8082 Ай бұрын

Hi. They can be purchased at this link: rhsoffroadengineering.com.au/

@double-oseven5725 Ай бұрын

Thanks heaps mate. Now that lots of time has passed what size tires would you go for on tge rok for serious offroading even if it meant some trimming etc?

@rhetth-s8082 Ай бұрын

305 70 16 or 305 65 17 are good choices requiring minimal trimming. The 295 70 17 is a bit bigger in diameter and is nice but it's a fair amount of extra work to get them to not scrub.

@blueyhanson6253 Ай бұрын

Thanks Cobber. I'm considering this model to replace a 'husky' which is costing a lot to use thanks to the people in Canberra increasing excise + GST on petrol.

@bboross Ай бұрын

Now knowing this, could you just pull the mirror off, apply tape, and re-fix the mirror, and not have to remove the backing plate at all?

@rhetth-s8082 Ай бұрын

There is or was a short video on youtube that shows how to take the back plate off. It's actually easy.

@aprilcastellon7087 2 ай бұрын

I just did this to my Mazda 6 worked like a charm. $700 savings on a new mirror the car dealership quoted. Thanks🎉🎉

@boblowe-mi9tf 2 ай бұрын

Any information out there on painting OVER Bullyliner. That is, a tutorial on what paint, prep used for painting OVER the liner once you are finished with the Bullyliner job. Say...when you want some other color. Thanks, I want the protection and effect but in white (OR) an Acrylic metalic color. Wondering how that texture will look when combined with a metallic finished coat. Thanks! I called the company and they said they did not produce white as yet.

@rachelp2421 4 ай бұрын

Had any issues with diff since then? trying to decide whether to do it 8mm hose instead for more air flow... but more tricky to do. So i want to just go 6mm like you have done.

@rhetth-s8082 4 ай бұрын

No issues noticed thus far.

@stephencelliers9127 4 ай бұрын

Thank you for this video. I have the same issue with my 2007 Pajero. I am going to move one of the shims don't tomorrow.

@rhyscavill3848 4 ай бұрын

Hi mate, brilliant video! I’m wanting to do this myself but can’t find the 4mm to 6mm hose adapters anywhere. What store did you get them from please?

@rhetth-s8082 4 ай бұрын

From memory it was from supercheap or autobarn. Not sure if it's on ebay as a single item. There is a kit you can get with lots of sizes but it costs a crazy amount.

@rhyscavill3848 4 ай бұрын

Spot on, cheers brother. They didn’t have them in store when I checked online, but they’re ordering me in some on Monday. I got underneath my pajero earlier just to suss it out before I carry out the work & above that bracket that holds the Gearbox and transfer Case breathers seems to have another breather style hose above it, do you have any idea what that might be?

@rhetth-s8082 4 ай бұрын

@@rhyscavill3848 its a while ago now, i cant quite recall what you might be referring to. Maybe try to get your phone in there to take some pictures.

@rhyscavill3848 4 ай бұрын

I’ve heard people say that the breathers for the transfer case are at the top middle of the transmission. I’m pretty clueless myself, but do you think those hoses in the black brackets are definitely the breathers for the transfer case And transmission?

@rhetth-s8082 4 ай бұрын

@@rhyscavill3848 from memory, yes, and especially so if i mention it in the video. I traced everything. I had the benefit of a 10mm subframe drop making access a tad easier.

@lukeoreilly1307 4 ай бұрын

Hi Rhett, Thank you for the video, it's very informative! When talking to the 285 tyre you mention rounded vs square edge tyres and that a square edge tyre might need +18 instead of +20 offset. Do you have examples of tyres that you consider have a round vs a square edge? I'm considering a 17x8.5 +20 wheel with a 285/70 tyre and trying to pick a compatible tyre model. Thanks

@rhetth-s8082 4 ай бұрын

The important thing is the width of the tread area. You can readily measure this if you have access to the tyres, or some manufacturer spec sheets used to have that information. I can tell you from my observation for example that a falken wildpeak has a narrower tread width than a mickey thompson P3. I have some opinions on some other tyres but not that many. If you intend to go offroad i suggest an 8" wide rim with a 285 to 305 wide tyre in order to reduce the risk of rim damage.

@lukeoreilly1307 4 ай бұрын

Thanks @@rhetth-s8082 Appreciate you sharing your thinking

@tonycervantes4816 5 ай бұрын

Nice how can I do or fix my side glass I don't know how to move it at all. If I move the switch, it doesn't make anything, just a noise.

@omidotunomiwole7794 5 ай бұрын

Hello, i'm impressed by the engaging content on your KZbin channel! As someone passionate about quality content, I'd love to collaborate and help you promote your channel.i believe my audience would genuilely appreciate your content, and together,we can create a win-win situation. Let's discuss the details and explore exciting possibilities to elevate your channel's visibility.looking forward to your positive response!

@aprilchase871 5 ай бұрын

*promo sm* 😋

@user-vo4xs1tl1i 6 ай бұрын

your video is very good but your s e o is not good

@ashrafulalamrimu209 6 ай бұрын

Hello, Hope you are well, and thanks. For your kind information, I visit your KZbin channel. Your KZbin video content is amazing. But not enough active viewers and new viewers. Your video needs to be on-page SEO and Off-page SEO. Then you can see better results day by day. I have completed lots of orders with success. If you have any questions just knock me. I am waiting for your respons

@ashrafulalamrimu209 6 ай бұрын

@shauncooper9942 6 ай бұрын

Next time I'm out, I am going to get myself a Podger Bar as per your recommendation! It will be a good addition to my toolkit. Poetry in motion watching your work. Thanks for making this video, as I've now got an Amarok...Cheers!

@Jack67808 7 ай бұрын

It is the best video I have seen yet

@hamishh1494 8 ай бұрын

What lug bolt size do I need to run with a 16x8 +30 offset rim on a 2017 4cyl 420 core amarok?

@rhetth-s8082 8 ай бұрын

The original wheel bolts probably have a ball seat, and most aftermarket rims have a tapered seat, requiring different wheel bolts, but you can typically run the same length as standard, unless there is something unusual about the replacement rim. You can measure how far the current bolt protrudes from the current rim, then put the bolt in the replacement rim and compare. Shorter and longer wheel bolts are available but unlikely to be needed.

@hamishh1494 8 ай бұрын

@@rhetth-s8082 thankyou so much for getting back to me!

@samtrest454 8 ай бұрын

Это усиленные привода?

@astro2456 8 ай бұрын

Wow, maybe the montero won’t float if you fill in the 3 row seat storage with heavy things ,

@rhetth-s8082 8 ай бұрын

When i did Nolan's i had heavy stuff in there including a toolbox, but they all got wet. When i did the next deep river, the Pascoe, i moved all my stuff out of there and filled the area with rocks for ballast. It still floated a bit but i made it across. If i didn't put the rocks in it might have floated downstream.

@astro2456 8 ай бұрын

@@rhetth-s8082 yes, I understand, due to the flotation it is too risky, maybe once we upgrade the suspension, add some batteries and trek stuff to the back , it might be enough to barely cross , hehe maybe let’s add some electric tiny water propulsion motor jets to the back😅 it could become handy 😂 an experiment for you to make content and for us to watch 🙃, kidding stay safe.

@rhetth-s8082 8 ай бұрын

@@astro2456 ha ha. I was running light, only one person and gear for one person. While the Pajero seems liable to floating sooner than other vehicles due to the generally lower floor and the rear compartment, most people carry enough load to keep some tread on the ground.

@harrytregidgo3958 9 ай бұрын

Have you got any lift on your truck mate?

@rhetth-s8082 9 ай бұрын

It has about 35mm of lift at the front.

@Jack-bt4xi 9 ай бұрын

Hi Rhett, I am wondering how's the performance for the 4mm plate I have a Pajero and looking for a light weight durable plate thanks

@rhetth-s8082 9 ай бұрын

Hi. My 4mm plates offer incredibly low weight coupled with good durability. There are a fair few out there on vehicles now and i haven't yet received any reports of damage to them.

@michaelg9648 9 ай бұрын

I got bogged in my v6 in sand and couldn’t reverse to get my self out and I wasn’t even bogged really bad. Had to get snatched out. I love everything about my amarok but that part is just shit. Sad part is I paid 1200 for a tune before the trip and still couldn’t reverse the bloody thing. 🤌

@rhetth-s8082 9 ай бұрын

I suggest you contact your tuner and ask them if they removed the reverse torque limiting and if not ask them to remove it. They should have removed it as part of the tune.

@B2310DEV 10 ай бұрын

What about the shocks? Can you use the standard one?

@rhetth-s8082 10 ай бұрын

Yes, standard shocks are fine.

@staceheasley1 10 ай бұрын

With the outback armour shocks, and without a diff drop; have you ever noticed the CVs clicking under acceleration, or when towing? When the shocks are at full droop.

@rhetth-s8082 10 ай бұрын

The Outback Armour shocks i fitted were supposedly only 5mm longer than standard. No, i did not notice a clicking issue under those circumstances, but i didnt tow.

@sgpaint 10 ай бұрын

all talk no action.

@robbiecryer 11 ай бұрын

Thanks for sharing 👍😎

@raymondroberts569 Жыл бұрын

Bro Im researching how to fix the spring clip that locks the door in.. any advice?..

@bradsmith1356 Жыл бұрын

Do you have a video of installing the door catch mechanism - with the spring under tension it must be a challenge

@AliKhan-ok6ph Жыл бұрын

Whats the difference you felt after installing these?

@rhetth-s8082 Жыл бұрын

They dont feel different, they just raise the height. The stiffness of the coil remains the same.

@charlesnicholo4418 Жыл бұрын

Hi do you do have any online shop link where to buy this coil insulator? thanks!

@rhetth-s8082 Жыл бұрын

www.ebay.com.au/usr/rhs_offroad_engineering

@rhetth-s8082 Жыл бұрын

www.ebay.com.au/usr/rhs_offroad_engineering

@markkunes9711 Жыл бұрын

Thanks Rhett a good clear and unhurried review. I got fed up with my heavy corded chainsaw and ordered one of these. I then looked at your review afterwoods as you do. I am now confident I made the right choice.

@Mike_44 Жыл бұрын

Excellent work. Thank you for the video. I didn’t know it had a backing plate. Gives me more confidence to pry on mine which is lose too. Will give this a try! Thanks!

@Othrr Жыл бұрын

Have you had to replace it yet?

@rhetth-s8082 Жыл бұрын

No, but i sold the vehicle so i dont know anymore.

@RodneyGlobeTrotter Жыл бұрын

Perfect. I’m in the UK, Thank you for taking the time to upload this video. On my 2006 shogun I was having problems with the door dropped. And difficulty closing and water leaking into the door via the rubber gasket around the door. I followed your directions and took the 3 shims out of the top hinge and it now closes perfectly and it’s drawn the top of the door in, and cured the leak. ❤ i would never have guessed that there were shims on that hinge and the advice of the key ways made it a really simple fix. 😊😊

@MrHukd Жыл бұрын

What year?. Include year and model in title. There's like 4 generations of Vito's

@renjuehu603 Жыл бұрын

did you just swap the rear diff? I mean how does it goes on the 4h, the front diff still 3.9 which means the front wheels always 10% faster than the rear.

@rhetth-s8082 Жыл бұрын

I swapped front and rear diffs.

@christinediprose-hn3gx Жыл бұрын

Hey there! I know who built the huts. They used to go on regular trips in and would stay 2 or 3 days! Good old fashion boys weekends!

@rhetth-s8082 Жыл бұрын

Thats interesting to hear some local insight. I didnt see any huts, were there roofs around the trees, or?

@christinediprose4181 Жыл бұрын

There was a shelter around 10ft up a tree lol. There should be quite a few more in the area. All quite different depending on how much alcohol was involved. They would be driven in and then hike the rest of the way. Usually 4 to 6 young blokes rain hail or shine! So the shelters would be made to suit. They are quite chuffed to see your video!!

@andrewsedger-cb5iw Жыл бұрын

Lovely work

@wesquilliam6201 Жыл бұрын

Do these work fine with airbags in the rear? I’ll buy a set if they fit

@rhetth-s8082 Жыл бұрын

Hi Wes. They have no impact on airbags, completely compatible.

@theaussie7160 Жыл бұрын

I never really have a problem with someone tapping my hood as im driving.....but i do check every morning to see if someone is hiding under there

@David-mr3gw Жыл бұрын

My vito just has the dash warning constantly intermittently flashing in and off. Nightmare. Think il just join the contacts permanently

@scottandchels6813 Жыл бұрын

I may have missed it. What vehicle is this on?

@rhetth-s8082 Жыл бұрын

N70 Hilux

@scottandchels6813 Жыл бұрын

@@rhetth-s8082 thanks, I thought maybe you had done it for the amarok you have or had.

@rhetth-s8082 Жыл бұрын

@@scottandchels6813 i no longer own an amarok but i have an impending order to do one for an Amarok, and once done will make them available. Where are you located?

@scottandchels6813 Жыл бұрын

@@rhetth-s8082 just we paddle from Tasmania, New Zealand 🤣.

@rhetth-s8082 Жыл бұрын

@@scottandchels6813 okay, so just add some silicone and polystyrene and an outboard, or hold tight and wait 🙂

@nalong55 Жыл бұрын

Have you made metal ones? I would buy them if you did

@rhetth-s8082 Жыл бұрын

Yes they are made of metal. There are three thicknesses available. Here is a link to one thickness...... www.ebay.com.au/itm/224761296233?mkevt=1&mkcid=16&mkrid=705-154756-20017-0

@nalong55 Жыл бұрын

@@rhetth-s8082 ahh thanks man, unfortunately it looks insanely expensive to ship to usa

@rhetth-s8082 Жыл бұрын

@@nalong55 i posted some to the states recently, postage was $37.80AUD to TX.

@adhienurhadi1250 4 ай бұрын

Can share about diameter front and rear speacer sir ?

@DanMelbOz Жыл бұрын

Thanks Rhett. Will likely copy part of your layout 😊 BTW, the bash plate I got from you has been doing very well and it has bashed a fair amount of rocks.

@stevendouglas6593 Жыл бұрын

The reason the saw has a cut out is to protect the motor. If the saw is overloaded (say pushing too hard) and the motor slows down too much, current through the motor can rise to a very high level which can damage the motor. The saw has a circuit which monitors motor current and cuts power to the motor when it gets too high. If you want to go hard, you should look at a more powerful saw or a petrol version.

@astro2456 Жыл бұрын

How did you prevent water damage on electronics and sensors under the car? Solenoids, actuators or sensors, or even keep the carpets dry? Please explain or make a video. How to care for after a water crossing?

@rhetth-s8082 Жыл бұрын

Hi. I posted a number of youtube videos on some preparations i made before i crossed this lagoon, check them out on my channel.

@muntee33 Жыл бұрын

Wouldn't the OEM upper control arms be playing a part too? Obviously a diff drop kit is needed too... Edit: How where the wheel alignment readings after installing the kit and is there much/any scope for adjustment in the OEM components or are eccentric bushes and whatnot starting to become a necessary consideration? 🤔 I wonder if there's a product or feasible method for fitting portal hubs... Shame the Yanks haven't developed a long arm IFS kit for em....

@rhetth-s8082 Жыл бұрын

In the absence of a diff drop, a lift of 40mm is the max the CV's can handle, and the std upper control arms are fine with that. A diff drop could allow more lift, but the more angle the lower control arms are on at ride height the more erratic the handling, due to track change during suspension movement.

@jackcat550 Жыл бұрын

They give you new bolts because they are a one use only bolts, not supposed to reuse old ones.

@rhetth-s8082 Жыл бұрын

New bolts were not supplied. When bolts are torqued into the plastic zone it's normally noticeable. These bolts have been reused many times by many people without issue.

Ең жақсы KZbin

Пікірлер