Just had one fail the exact same way.

With 60 plus years as a gunsmith, firearms manufacturer and machinist behind me, in my opinion this is NOT a safe way to thread a barrel for a sound suppressor, flash suppressor or muzzle brake. There is no way that the barrel ends up perfectly round and with the external diameter perfectly concentric with the axis of the bore when you reduce its diameter by hand filing. Also, it would be tough to get the threads started square to the bore with a die even if the barrel were turned perfectly round and concentric, without the use of a tight-fitting pilot in the bore. Baffle strikes or strikes on the brake or flash suppressor would damage parts and potentially harm the shooter or bystander. Send it to a gunsmith and have it threaded on a lathe or use a freely rotating pilot in an annular cutter, to reduce the diameter and have it end up close to concentric with the bore, followed by a threaded pilot for the die to cut the external threads. The lathe, with an independent four jaw chuck, and a closely fitted plug in the bore to dial the axis of the bore into perfect concentricity with the axis of the lathe, then turn down the outside diameter, start the threads with a single point tool in the lathe, then finish them with the die if you want to, that's the best way to do this, but filing it down, not a chance, I have repaired numerous rifles over the years brought in by folks who tried to thread the muzzle end of the barrel in the manner described in the above video.

Im confused that, when I checked at Nissan service center they told me that no need to change oil for CVT and I run 200k without changing. What to do? There's no issue in gear changing. Having 2015 X-trail in Qatar.

This is the most real video i have seen. Thanks for the realism.

Lol....ok. from a former weapons mechanic with the 40th ARRS. Vietnam Era. If it works...ok whatever but it does save a handful of money. Thanks for the show.

Nice work man

Thank you for the nice unboxing video.

Mine doesn’t have a set screw? Is this an older model or have they changed it that you know of ?

Well done. While you're advancing your gun smithing skills others will hate. Dont let the ones bother you, that cant do it them selfs. Its like working on a car some people rather pay to get it possibly done right. Than just learning how to fix it and doing it for them selfs, for 3/4s the price😂.

Has anyone tried to siphon out the cvt fluid on a drain and refill? Instead of removing transmission bolt underneath the vehicle

Where do you get the insulation from? And what’s it called please?

Looks like he also worked on his shotgun and shot a hole in his corner post

It has a 28 inch barrel

Bideo is good but the audio need an improvement

how well did your bullets fly out the barrel did it line up correctly

Hi, would you say that the Mossberg Silver Reserve or the Pointer Acrius is a better over under in terms of quality?

Same problem. Bought the car over the internet with a rebuilt/salvage title. Pretty stupid but the car looks absolutely new. Imagine my "surprise" when the car starting throwing all these codes on my maiden drive. I was a little concerned. Thank God for the internet. The stealership must of had the battery on a trickle charge. When they reinstalled it nobody tightened the battery clamps... Tightened and put on my battery tender. Hopefully this works!!!!!

Is it real wood ?

How much was the repair?

Oh woooowwww

I thank you sir you have inspired me and I know I will do it right and save money........I thank you again...,...

THANK YOU 🫶🏻

good video

I'm liking the marine lubricant pump. I recognize that thing from the hundreds of gear oil changes I've done on boats over the years

You over-torqued your drain but not holding your torque wrench at the handle.

I had the same problem. I figured out that the problem is just a battery. I replaced the battery, drove one round in my neighborhood. The car reset itself. I did this for both of my honda clarity.

great how to video. Do you use the same fluid for both transfer case and differential? would this apply to all Nissan vehicles regardless of year or model? Thanks

Thank you, love the Clarity and you have made it easier for me to do my own maintenance.

Use a damn drill with a cutting bit at least lmao

I think I bought the last 20g 28" model on Cabela's. Excited for it to come in :) Thanks for the video!

My 2019 AWD took only one quart to do both front and rear. 10mm hex on all four plugs. Thanks for the video!

To each their own.... If you're happy with the result then perfect.

Thank you for this video it helped my trans fluid was at 62,000 and i got it changed

Did he dry fired???

Thanks for this video 😊 is the safety manual or automatic?

Have you had any issues with it after 1 month of use? How many shots you put through it?

My transmission fluid need changing in my 2018 Nissan Rogue Sport I’ve never did it on any of my car but now I know how to thank u for showing us step by step…

Damn flips

32 or 30 degree??

I have to laugh, the rubber piece on the charging handle.. IS ONLY TO PREVENT DAMAGE TO THE BOX IT IS SHIPPED IN SO TAKE THAT THING OFF.😂

What was the company you said you called? I couldn’t understand the name when you said it in your video

Great video! I am getting ready to do similar repair to my boat as well. I am curious as to how you were able to build up those fiberglass sidewalls inside the transom to make the mold. How did you access that and get the glass to adhere?

Okay I’m gonna give it a try 😮 browser it’s all you need to even eat CB KZbin in the car without jailbreak api lmao 🤣 inside joke but seriously imma try your simple way. All I know is that as much as I love my Honda cars they suck for not giving us a video apps plays 🤣 and Apple don’t help 😂

just excellent dude!!

Excellent instructions! Thank you very much for helping out!

Any striped bass there in May?

Should I add an additive to my 2018 Nissan Rogue freshly change CVT oil ?

Do you know are transmission drain crash washer and oil drain crash washer different or have the same size?

How is the felt recoil? Does the butt pad seem to be a recoil pad? or just a butt end? lol

Thanks for sharing, your video was very helpful 👍👍👍