4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@paulortiz5600 Ай бұрын
With the amount of money we all pay for a new Harley , Harley Davidson should do this at the factory instead of us doing it or having to pay someone to do it.
@scottygarage7408 Ай бұрын
@paulortiz5600 yeah, i agree, but the EPA is the reason for it and not HD. They did the same to cars they used to vent into the atmosphere and said it was bad. Now cars have the same thin going into thier intake.
@paulromberg 2 ай бұрын
Excelent video... what brand of kit do you use? Que marca es el kit que utilizaste?
@scottygarage7408 2 ай бұрын
@paulromberg i actually do not recall which one it was. I did not use a high end one, but considering these inexpensive ones still work on my wife's bike I am okay with them. I did have one issue the lens on one of them had condensation after riding in a heavy Florida rain storm. I removed the light and let it dry out. Once dried out I used clear silicone and ran it along the seam where the lens and light body meet. This did the job I have not had another issue with condensation. My new to me bike came with LEDs already from the previous owner, so I did not have to mess with them.
@ronnym1977 4 ай бұрын
You fast forwarded through the part I really needed to see.
@scottygarage7408 4 ай бұрын
@ronnym1977 what part, maybe I can explain or help.
@PaulyV56 4 ай бұрын
the fuggin music....
@johnschoonmaker-tm3ll 5 ай бұрын
Terrific information, thanks for posting!!!
@olliweinmann510 6 ай бұрын
would love to see the video when you're changing those like you mentioned :)
@guitarz99 6 ай бұрын
Is it possible to just get that plunger seal outside o ring
@scottygarage7408 6 ай бұрын
Not by itself it comes with the kit.
@ezy_ryder 7 ай бұрын
too many words!!!
@Norbert-cm9xp 7 ай бұрын
Danke für die Anleitung
@davidmccall4776 7 ай бұрын
Lining the headlight housing with aluminum foil would make these even better!
@OBSSmediaAaronWoodruff 7 ай бұрын
all that talking and you dont explain the direction of the dust cap seal. its flat end down by the way. more to the point less talky talky
@CabinGuy 4 ай бұрын
ty, thats the whole reason I checked on utube, to see which direction it went on
@jordanlinzy7033 8 ай бұрын
Do you have a link for these headlights? I don’t wanna get something wrong.
@scottygarage7408 8 ай бұрын
No I do not, but you can find them on Amazon or Motorcycle parts Sellers
@sigma-enigma9504 9 ай бұрын
Thanks brother
@none4085 11 ай бұрын
How about an update on the Catch Can? Finished product and how & where you mounted it? Any information would be greatly appreciated! Thanks...
@scottygarage7408 11 ай бұрын
I wish I could add an update. My bike was stolen and wrecked in a police chase. It was doing great until then though. I do have a new bike an 06 ultra, that I am hoping to start making videos with soon.
@none4085 11 ай бұрын
@scottygarage7408 OH man, bummer about your scooter! Sorry to hear that, hope you're new ride treats you right. Appreciate the response...great install video btw! Thanks
@CarlosGarcia-ls4hn 11 ай бұрын
In your next video, can you cover how to unplug the orifice inside the master cylinder (or bench test it) where the brake fluid flows to the caliper? I have a 2000 Springer that I suspect has a clog somewhere in the brake lines or master cylinder because I am unable to get the fluid to flow out when attempting to bleed the system. Thx.
@westieBrucedavidson Жыл бұрын
Did you find idling got different and any changes mate? Thinking of doing same thing but tap some brass elbows into it Great work by the way😊
@scottygarage7408 Жыл бұрын
I did not notice any change. I did notice less oil in the intake.
@jimmoses5049 Жыл бұрын
Where did you get the led replacement lights
@scottygarage7408 Жыл бұрын
Amazon.
@chrisc4660 7 ай бұрын
What was the brand on Amazon? Thanks great video.
@arzaduzit Жыл бұрын
Great video we need more
@fredgti9826 Жыл бұрын
Excellent 👍👍✌✌🇫🇷🇫🇷🇫🇷
@OwnThe24 Жыл бұрын
She had trouble getting the headlight to line up and fit flush and she said, “Should there be a gap here?” And you skipped how she got it flush. My headlight doesn’t fit flush and it will not accept all 3 notches. I have a 2016 heritage softail classic. The plug on the headlight also doesn’t go in all the way to the receptacle. Did you do anything to get that headlight to fit flush because a response and video to her question was exactly what I have been searching all over KZbin for. Any suggestions would surely be appreciated! Thanks.
@scottygarage7408 Жыл бұрын
It has been so long, that I do not recall. I will try to look at it amd see if I can recall. Also, hers is a 2008 , I am not sure if the headlight assembly is the same.
@-MrRichBiker1967 Жыл бұрын
Hey Scotty thanks for the video very informative, but I just took 2 3/8 hoses from the top breather bolts, and let it drain under the bike instead of going through all that, no? Okay I could dress it up a little bit not the neatest thing but it works. In your case you have to worry about more leaks now. And I hate chasing down air leaks
@softailslim7146 Жыл бұрын
What size tap did you use ?
@randymccalla9995 Жыл бұрын
I would be worried that the little screws would get sucked into the engine and crack a valve seat .
@scottygarage7408 Жыл бұрын
That is why used loctite and RTV in the hole.
@bonez6349 Жыл бұрын
Man i cannot find a self-tapping hex key set screw nowhere.! lol where did you get this.? Do you have a link...?
@scottygarage7408 Жыл бұрын
I did not use a self tapping hex. I used a tap and threaded the drill hole and used a regular hex.
@BackroadsNBrokenDreams Жыл бұрын
Way to pan away right as she takes the cover off. Having trouble getting mine off
@motorcitymadman146 Жыл бұрын
So what did you do with the holes in the back of the intake? I would guess that is not good to leave them open as it will suck air through it.
@flyinbrianewing 8 ай бұрын
At 5:40 he discussed this.
@gregcalley2942 Жыл бұрын
Good video
@NativeSD53 Жыл бұрын
Thanks for the great video Brother, If you have time to reply that would be great. My front brake is weak in general. I back down a ramp when leaving my garage/cargo box trailer, and my front brake just slows me but will not fully stop my 2010 Heritage classic. Any advise where to look first for the cause, or how to diagnose what the failing component is? I changed the fluid a year ago (dot 4), rotor and pads are good. No pulsing or anything else when applying front brake while riding. I figure it's got to the the cylinder of the caliper. Thanks if you can reply. I will check out your other vids.
@scottygarage7408 Жыл бұрын
Hey, a couple quick thoughts is that you have air in the line, weak master cylinder, the brake hose has debris or is clogging, or some other oddity. I would check those from easiest to hardest.
@edgeiger1514 2 жыл бұрын
It's been 2 years since this video, did anybody tell him that they make an automatic center punch that can be had for about $10? Sure would have made that a lot cleaner!
@scottygarage7408 2 жыл бұрын
I agree that would have made it cleaner and since that video I was broken into and had many of my tools stolen, but I actually added ones of those into the collection and I recommend using them for a cleaner job. We learn as we go, never stop learning.
@shawn92882 2 жыл бұрын
Oil on the filter is the least of the downsides
@thomasfrawley5798 2 жыл бұрын
I installed this on my softail and I seem to be getting water in the catch can,I guess it's condensation but nobody has said anything about that happening.
@scottygarage7408 2 жыл бұрын
That could be condensation, but the question is how much and how often?
@adamoneill5348 2 жыл бұрын
This video helped me out so much. I'm not to mechanical. But literally every ounce of this video made it so much easier. Thank you
@scottygarage7408 2 жыл бұрын
You are welcome. Glad it was able to help.
@irishguyjg_2ndchancerecovery 2 жыл бұрын
Don't lose those little quarter size round gaskets. I had one pop out of my stage 1 BIG sucker and I had issues until minor issues until I realized what had happened.
@irishguyjg_2ndchancerecovery 2 жыл бұрын
Thanks brother Scotty. I'm on a sportster iron 1200 and alot of the issues you guys are having on some of the big bikes, I'm obviously having same/similar, so I appreciate vids like this. God bless you
@chipper442 2 жыл бұрын
You got a follow for the content but mostly the Sctties lol.
@scottygarage7408 2 жыл бұрын
I want to start doing content again soon and McGee is arroooing to work on a bike
@jerrycagle7565 2 жыл бұрын
Great video, my question is doesn't the bike lose its vacuum, it needs that vacuum or am I missing something, let me know.
@scottygarage7408 2 жыл бұрын
It does not lose the vacuum. It gets vacuum out of the manifold which is behind the air intake.
@davidmatson153 2 жыл бұрын
Nobody cares about your life history I tapped out after 2 minutes
@stevesyncox9893 2 жыл бұрын
Not “combustion gasses, crank case gasses.
@scottygarage7408 2 жыл бұрын
Good catch, yes crank case gases.
@mgkent2010 2 жыл бұрын
Go up it works great an no oil gets away just crankcase pressure
@machninety7334 2 жыл бұрын
I trust your quality control team more than any dealership.
@machninety7334 2 жыл бұрын
I trust your quality control team more than any dealership
@scottygarage7408 2 жыл бұрын
Same here they help out a lot.
@castlechevalier8426 2 жыл бұрын
Omg such bs. I tried to out that stupid dust cap seal on. It would not budge. Have to get a rebuild kit now. Annoying af
@CabinGuy 4 ай бұрын
ya mine was a bitch to get off, 1/2 hr with a tiny screw driver digging away
@peterbergeris6510 2 жыл бұрын
Are they by Sunpie or Truckmall?
@scottygarage7408 2 жыл бұрын
I believe they were Sunpie.
@martinrobbins4945 2 жыл бұрын
What part number is that?
@martinrobbins4945 2 жыл бұрын
Where do I purchase a rebuild kit? I have a 2004 dyna wide glide. I did notice a lot of them master cylinder assembly are the same.
@scottygarage7408 2 жыл бұрын
Go to the dealer and give your bike specs and they should be able to get you the right kit.
@mattcozine9630 2 жыл бұрын
Thanks for the Information. Saved my ass before attempting to do it myself...... then not being able put back together
@scottygarage7408 2 жыл бұрын
You are welcome. Glad that I was able to help.
@jamesbennett9654 2 жыл бұрын
If your getting that much oil in your breather/ air filter, perhaps you should go through your motor anyway?
@bobberguy1 2 жыл бұрын
All twin cams and M8s puke that much oil. Take the spark plugs out and look at top of pistons after 10,000 miles.
@Missions2Africa 2 жыл бұрын
Got mine in the garage and going to install this week. Thank You! I miss having my husband around to help. It was nice to see you two doing this together. :-)
@scottygarage7408 2 жыл бұрын
Thank you, my wife and I try to do things together life is short.
@michael54321 2 жыл бұрын
Too much chatting, not enough rebuilding
@scottygarage7408 2 жыл бұрын
Yeah, it was my first video. Still learning.
@jeffpolen9533 2 жыл бұрын
trun stupid sounding background music off