Harley Davidson Front Brake Master rebuild (06 Softail)

This video shows how to rebuild a Harley-Davidson Softail Front Brake Master Cylinder. This is for the single caliper model of brake master. This is a video that can also be used for learning how to rebuild brake master cylinders in general, as they all work in a similar fashion. This is also a non-abs unit. My first actual video, I hope you enjoy it and learn or answer a question. I am planning on making a Scotty Scale for ease or difficulty of work.

[@olliweinmann510]

would love to see the video when you're changing those like you mentioned :)

[@quickayo6365]

I think you did just fine with this video! There is a button for people to skip around for a reason! I like the content!

[@sigma-enigma9504]

Thanks brother

[@CarlosGarcia-ls4hn]

In your next video, can you cover how to unplug the orifice inside the master cylinder (or bench test it) where the brake fluid flows to the caliper? I have a 2000 Springer that I suspect has a clog somewhere in the brake lines or master cylinder because I am unable to get the fluid to flow out when attempting to bleed the system. Thx.

[@arzaduzit]

Great video we need more

[@Norbert-cm9xp]

Danke für die Anleitung

[@gregcalley2942]

Good video

[@Vic-ng8if]

Good video fella. Straight to the point and information on how it gets like that.3rd btw

[@scottygarage7408]

Thank you, I do try.

[@seleldjdfmn221]

First! keep Growing! let's build each other up :O

[@scottygarage7408]

Thank you. I am working on getting better.

[@NativeSD53]

Thanks for the great video Brother, If you have time to reply that would be great. My front brake is weak in general. I back down a ramp when leaving my garage/cargo box trailer, and my front brake just slows me but will not fully stop my 2010 Heritage classic. Any advise where to look first for the cause, or how to diagnose what the failing component is? I changed the fluid a year ago (dot 4), rotor and pads are good. No pulsing or anything else when applying front brake while riding. I figure it's got to the the cylinder of the caliper. Thanks if you can reply. I will check out your other vids.

[@scottygarage7408]

Hey, a couple quick thoughts is that you have air in the line, weak master cylinder, the brake hose has debris or is clogging, or some other oddity. I would check those from easiest to hardest.

[@jimkoch1040]

Is that a Harley or aftermarket rebuild kit? I'm getting ready to rebuild mine so this video is extremely helpful!

[@scottygarage7408]

I believe it is a Harley kit. I honestly cannot recall off of the top of my head.

[@aarongolob4725]

HD part number 45006-96F. I grabbed a screen shot from the video

[@CarlosGarcia-ls4hn]

You might also mention that when the brake lights fail to come on, most likely, the culprit is in the piston assembly.

[@glasspilot1]

Scotty, great video! I'm about to dig into mine. I have a 2006 EG Ultra Classic with dual discs. Is the master cyl similar to this one?

[@scottygarage7408]

There is a difference so make sure you buy the right kit for the dual brake set up. The bore size is different, but otherwise almost exactly the same. Good luck and take your time.

[@glasspilot1]

@@scottygarage7408 Thanks! Great videos!

[@guitarz99]

Is it possible to just get that plunger seal outside o ring

[@scottygarage7408]

Not by itself it comes with the kit.

[@martinrobbins4945]

Where do I purchase a rebuild kit? I have a 2004 dyna wide glide. I did notice a lot of them master cylinder assembly are the same.

[@scottygarage7408]

Go to the dealer and give your bike specs and they should be able to get you the right kit.

[@martinrobbins4945]

What part number is that?

[@markbeesley5496]

Where is the circlip thst holds the piston in?

[@scottygarage7408]

It does not have one. I thought the same thing. I even pulled it out of another to make sure nothing was missing.

[@conrat2000]

Second! lol.

[@adamperez7427]

Can be a better video with a better camera angle. Thank you.

[@scottygarage7408]

I agree. This was my first real video and I appreciate the comment. Thank you.

[@castlechevalier8426]

Omg such bs. I tried to out that stupid dust cap seal on. It would not budge. Have to get a rebuild kit now. Annoying af

[@OBSSmediaAaronWoodruff]

all that talking and you dont explain the direction of the dust cap seal. its flat end down by the way. more to the point less talky talky

[@michael54321]

Too much chatting, not enough rebuilding

[@scottygarage7408]

Yeah, it was my first video. Still learning.

[@mstep3850]

Too long

[@ezy_ryder]

too many words!!!

[@davidshearer1036]

You talk to much about yourself we just want the facts dude lol

[@scottygarage7408]

I won't argue with that it was my first video. Lol.