7 сағат бұрын
28 күн бұрын
2 ай бұрын
3 ай бұрын
9 ай бұрын
9 ай бұрын
9 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@jayz5x 14 сағат бұрын
Sounds really good how you like the set up so far
@alaskagarage 12 сағат бұрын
@jayz5x Thank you. I like it. It's really nice to be able to quiet it down a bit for longer drives.
@justtrue8228 2 күн бұрын
Hi i did same as you did and get everything but sports button is missing i looked it in controls and pc pages
@jeremymoten5245 11 күн бұрын
I can’t get the pages to load up on the screen
@alaskagarage 11 күн бұрын
if your talking about the performance pages that sometimes don't want to load up go to 10:00 of the video i show what to clear in order to get it working. I hope this helps.
@bryanperez2268 14 күн бұрын
For the passenger door where did you got the positive from? I’ve searched with a test light and didn’t found it ? Welcome lights aren’t good enough to supply power help!!! Driver and back doors are done
@alaskagarage 14 күн бұрын
I had posted a picture of the drivers side showing the wire I tapped into the passenger side I'm wanting to say was same color and gauge of wire. If you don't have that one you might not have a suitable power wire in your door and will have to either run one from another source or run the wires from the light to the main controler with a splitter.
@bryanperez2268 13 күн бұрын
@ Sadly, I don’t have that wire, so I will have to run a cable from the driver’s door harness switch to the passenger front door. What I like about this approach is that when you press the window lock button, the strips on the doors turn off. I want to mention that on the front passenger door I actually found a constant power cable connected to a module, it has enough power to light up the acrylic strip but I’m not sure what it’s for. It’s purple and looks like an 18-gauge wire. I didn’t want to leave it connected there, as I’m concerned it might cause a short or other issues. But when it was connected there I turned off my car and all lights were off except for the passenger side it took like 3 to 5 seconds to be off which was kind of cool compared to the others powering off instantly
@jc_hertz7450 22 күн бұрын
Where did you get the lights from.
@alaskagarage 22 күн бұрын
@jc_hertz7450 i got them on Amazon I have a video on them were i supply links for everything I used. 😀
@alaskagarage 22 күн бұрын
kzbin.info/www/bejne/hqLNaZeuZrKUjZo
@lemme_phister 24 күн бұрын
I may have missed it, but do you think these will fit a '17 Ram 1500 5.7?
@alaskagarage 24 күн бұрын
@lemme_phister I'm having a hard time finding definite answers on that. The manifolds should fit without any issues but your mid pipes might have to be custom unless you are getting one from either the srt truck lines such as the trx, hellcat Durango and the track hawk and srt jeep. You will probably also have to change out your cat back with it.
@lemme_phister 24 күн бұрын
@alaskagarage Thanks for the response. I want to make simple mods without digging into the block, so these will be a nice addition.
@TheNovaNorm 24 күн бұрын
Very helpful! Thanks a lot.
@alaskagarage 24 күн бұрын
@@TheNovaNorm your very welcome
@roberttorres-bz8he 25 күн бұрын
Can you do it with an android phone?
@alaskagarage 25 күн бұрын
@roberttorres-bz8he absolutely infact that's what I'm using
@vishnusudheendran 25 күн бұрын
Does Launch control actually work in SXT without Super Track Package from factory. Tazer doesn’t support enabling launch control, it just adds the performance page but Launch Control doesn’t work.
@alaskagarage 25 күн бұрын
@vishnusudheendran it will be the same as the tazer in that.
@302hobronco 26 күн бұрын
I have that same sweatshirt. Excellent video. I don't have any mopars, but i like when factory performance parts are fitted on stock production engines.
@alaskagarage 26 күн бұрын
@@302hobronco thank you
@rickkillian2378 27 күн бұрын
Why didn't you just go with long tube headers?
@alaskagarage 27 күн бұрын
@rickkillian2378 i got these ones for next to nothing and with it going supercharged anyways the supercharger alone is going to put it at the tranys limits, so I won't need to go all out to hit those numbers.
@alaskagarage 27 күн бұрын
@rickkillian2378 compared to the factory manifolds these have bean proven to produce gains. All i really needed tho was a port for the wideband but I had these available.
@thisguyshorty3554 27 күн бұрын
Might as well get headers if all that work is being done just to swap a different exhaust manifold.
@alaskagarage 27 күн бұрын
I thaught about that the hole time lol
@PaperRouteFrank6.7 27 күн бұрын
The 6.1 manifolds do just as well as aftermarket shortys I did this in 2016
@thisguyshorty3554 27 күн бұрын
@PaperRouteFrank6.7 Im sure these are more restrictive than shorty headers. There is no individual tubing for each cylinder, or a decent collector to help with scavenging. More mid range TQ with them.
@thisguyshorty3554 27 күн бұрын
@PaperRouteFrank6.7 It isn't like I built headers to know what Im talking about.
@ryotaryuu 26 күн бұрын
The SRT factory headers are considered a mid length header. Longer than shorties, shorter than long tubes. Long tubes are expensive, hard to install and are usually not great for street use on these cars, especially if you are lowered at all. The scrape on everything and will require a tune. These SRT headers have been tested and flow better than ANY aftermarket shorties. They are an awesome upgrade to and 5.7. I have them on my Charger tunes with kooks high flow cats and 3in all the way. It made a huge improvement in performance and sound. These are the absolute best bang for buck mod you can do to a 5.7.
@thisguyshorty3554 27 күн бұрын
Those are not headers. They are tubular manifolds.
@alaskagarage 27 күн бұрын
Yes that is technically correct because they are an oem part they are classified as manifolds despite being a tubular design that would make an aftermarket option a header.
@tejsingh5300 Ай бұрын
How did u wire the front doors i didn't find an orange and white wire in the window switch plug
@alaskagarage Ай бұрын
@tejsingh5300 if you don't have those wires your going to have to on the same plug check voltage of each wire with a miltimeter. Not all the power wires will supply the 12 volts you need.
@alaskagarage Ай бұрын
Give me acouple minutes I have the car in the garage I will pull my door panel and check the wires on the drivers side
@tejsingh5300 Ай бұрын
Thank you so much for going out of ur way I highly appreciate it lmk how u wired the front door ill do the same
@tejsingh5300 Ай бұрын
@alaskagarage i did find a 12 volt but even with ignition off im getting power i open and closed the door as well the power still there
@alaskagarage Ай бұрын
@tejsingh5300 it's the bigger gauge pink with a yellow stripe that I tapped into on the drivers side should be the same on the passenger side
@eulasduff5651 Ай бұрын
It sure would’ve been nice for you to show us exactly what that pigtail looked like at the finish product of it. I couldn’t see you by that picture what hooked to what?
@alaskagarage 11 күн бұрын
Sorry for the late response. If you watch from 6:55 on it shows the part i cut off and the adding of the resister between the 2 wires to use and what wire to not use also shows it plugged in.
@zahidhussain-hy1xy Ай бұрын
Good job
@alaskagarage 11 күн бұрын
Awesome I'm glad you liked it.
@gazdunk274 Ай бұрын
What are the benefits to doing this on the v star, thanks. Also great video work
@alaskagarage Ай бұрын
@@gazdunk274 it is the best flowing intake you can get for the vstar without changing the carbs out so you get the best gains in power from it.
@stephenb6054 2 ай бұрын
After I cleaned my TMAP sensor I re-installed w/ a BANKS MAP sensor relocation kit. What it does is, it keeps the sensor out of the soot as it flows through the EGR and helps keep the sensor clean.
@hustlegames8325 2 ай бұрын
How many do I need to do that same setup
@alaskagarage 2 ай бұрын
I have links in the description with quantities on everything I used.
@hustlegames8325 2 ай бұрын
Thanks
@alaskagarage 2 ай бұрын
@hustlegames8325 no problem
@HaiPham-dw2kg 2 ай бұрын
How much was the kit from fuel moto? I have the same bike and wanted to install the same cam.
@alaskagarage 2 ай бұрын
@HaiPham-dw2kg I'm wanting to say it was around 700 with their tune aswell but I had to do the buy-in for the tune because I did not get my power vision from them.
@angiecontreras266 2 ай бұрын
Nice...!
@alaskagarage 2 ай бұрын
Thank you
@nataliegasque8349 2 ай бұрын
O...M...G 🙏🏽 Thank You So Much! I own a 2015 GMC Terrain and watched your video but before even splicing the wire to the latch, I made the pigtail as you demonstrated, unplugged it and stuck the two wires in the vehicle's harness just to see what happened and it worked!! 😲.....then I proceeded. This ish has been driving me nuts!!!! 😡
@alaskagarage 2 ай бұрын
Awesome I'm glad it was able help you out. Yeah something as simple as hood open and causing the auto start to not work here in alaska was just not going to work for me.
@Slking507 2 ай бұрын
1:58
@chadprewitt9729 2 ай бұрын
Got one for a new mustang gt? I'll buy it right now
@alaskagarage 2 ай бұрын
only fords they offer them for is the explorer in a kit option but send improved racing a message and they should know what fittings your going to need to get it done. their race cans are a custom fit but odds are they should have something that will suit your needs. here is a link to their can that would be used as an inline from your passenger side valve cover to your intake manifold would just have to ask them what fittings will be needed and build a bracket. www.improvedracing.com/ccs-high-efficiency-quick-release-oil-catch-can-7-oz.html?af=ALASKAGARAGE&referring_service=link
@ImprovedRacing Ай бұрын
What year?
@PluggedinnSince 2 ай бұрын
Did you have these options from factory?
@alaskagarage 2 ай бұрын
@PluggedinnSince nope, I did not .
@PluggedinnSince 2 ай бұрын
@@alaskagarage I’m having the issue of losing my options. Unplugged my battery to get rid of a check engine light but when I plugged it back in I got the blue themed uconnect instead of the red theme like I had
@alaskagarage 2 ай бұрын
@PluggedinnSince when your doing that it is resetting your head unit you could also pull the radio fuse that will do the same thing. Some people have the issue of them dropping with this way and the tazer. Haven't had mine drop but whith what I've read is it will drop acouple times then stick.
@PluggedinnSince 2 ай бұрын
@@alaskagarage appreciate the help
@freddysanchez5019 3 ай бұрын
Great video man. Just wondering if you can unlock the back up camera with it?
@alaskagarage 3 ай бұрын
@freddysanchez5019 yes with the alpha obd app it will give you access to all the factory addon features if your vehicle is equipped with them. In another comment I mentioned the 2 that might need to be changed that reference back up camera. Just make sure to take note of all things that you change for just in case something doesn't take rite and you have to revert back. You don't want to be just changing things willy nilly.
@justtrue8228 3 ай бұрын
Dose performance page can be add on smaller lcd ?? 7 inch
@alaskagarage 3 ай бұрын
sadly no you will have to upgrade to the 8.4 from my understanding it does not have the hardware capability. if you have the center display that is the style like mine though you will get the gauge cluster displays.
@justtrue8228 3 ай бұрын
@alaskagarage yes i have display in cluster! Someone told me can active sports mode when in manual transmission mode can you share how to do that?
@alaskagarage 3 ай бұрын
@justtrue8228 Only other way to activate the sport mode that I know of other than on the 8.4 display is if you have the dedicated button on your climate control panel. If you don't have that, you could install that it should have all the plug-ins for it behind the dash. Then use alpha obd and go to body computer, car configuration change, and vehconfig 3 sport mode present and select yes. The sport mode is only changing shift speeds and keeps the active exhaust disabled if you have it. When you're in manual mode, it is a completely different category within your tcm that has its own carictoristics.
@ryancornelius1007 3 ай бұрын
I had high compression pistons done on mine with a bunch of other stuff and i kick myself for not doing heads cause now i want a nasty cam but cant cause of the heads.
@anteZER0 3 ай бұрын
Have you noticed any fading or discoloration of the resin yet? How about the stitching, has it held up no fraying or pulling out so far?
@alaskagarage 3 ай бұрын
@anteZER0 no so far it's holding up great. I can't vouch how sun will fade it cause it's rolling into the winter darkness so all it gets is neon lights. Defiantly created an additional joy to the drive just has way better ergonomics to hold onto.
@anteZER0 3 ай бұрын
Not sure why this video doesn't have more views tbh. Nothing beats a real-time tutorial that shows realistic expectations, not bullshit. Only question I have is, does the mx+ need to stay plugged into the obd port after the pages are available?
@alaskagarage 3 ай бұрын
@anteZER0 hey this video is starting to build some steam after it was dormant for a while so it has some hope haha. No the mx can be unplugged directly after activating the pages, and the pages will stay. I keep mine plugged in but that's cause I'm always fiddling with things.
@anteZER0 3 ай бұрын
Awesome! Thanks for taking the time to put this together, was very helpful.
@alaskagarage 3 ай бұрын
@@anteZER0 my pleasure makes me happy that someone was able to find it helpful. I'm going to be doing one on the changes to make when going from halogen headlights to led to reduse the flicker it creates.
@anteZER0 3 ай бұрын
Follow up from yesterday. Got my mx+ today and did the perf pages/drive mode! Saying it went smooth is an understatement, thanks again to your vid! I had a couple questions regarding backup cameras and rear bumper sensors. I did a bumper and trunk lid swap and was wondering if you knew what configs needed to be enabled to get both working on my 16 charger rt. Both the trunk and bumper are factory and had the harness/connectors for plug n play.
@alaskagarage 3 ай бұрын
In alpha obd go into the body computer, car configuration change, vehconfig 1 rear view camera and select yes then same menu ecu config 3 rear camera present and select yes. Those might already be selected tho and could be just a plug and play without having to change anything I don't know about the rear sensors tho.
@jonniemayhem 3 ай бұрын
Amazing job but looks like sht brotha 😂. Don't worry I went thru the exact same thing. What you do now is find a used road glide rear fender & taillight on ebay or somethin, then drill & mount it . Make sure to set it a little further back, don't worry if you see some empty space underneath your seat between where the road glide fender ends and your frame begins. RG rear fenders don't go all the way up like the dyna ones do. If you're handy with that welder you can cut out what you need from your dyna fender and weld it onto your new RG fender. I Didn't wanna wait or have to paint so I didn't and bc of that there empty in front of the rear shocks u can actually see thru to the other side but it's not as noticeable or awkward as having long bag with short rear fender. The tradeoff was absolutely worth it. I had to get some of those fancy all in one led tailights/ turn signal /stop that twist right into your bulbs sockets. The wiring is well hidden and works with your stock circuit board just bolt it into the inside of the rear fender. U can also new tri bar taillight that may or may not come w the rear fender you got but u can easily order one. If u really wanna look clean u can get a cvo rg fender as they've got those vertical thin lights that go between the bag and fender to complement the tailight. Not don't yet. It's not a bagger till it's a bagger. I was able to buy the fairing/headlight/radio Guage all together from a buddy that was gonna turn in his 2020 rg to the repo guy. Instead I paid him couple bucks and had him report the bike vandalized before turning it in😅. That's how I got all the rg parts I needed. U will need the rg right hand control to change the volume on the stock HD. It's amazing that the dyna ecu and bcm recognizes what those white and red command wires are telling it once you plug em in. Not gonna lie it was a pain in the ass but I got it done.
@alaskagarage 11 күн бұрын
I'm actually currently in the market for another bike. I think this one i will start off in a model that is more suited for what i use it for. The dyna was fun nimble and light but i primary am doing longer trips and that's probably going to better on a touring frame or even a softail.
@geraldgoodiii6993 3 ай бұрын
Got that wood555 in my 2008 FLHRCI 96ci Love it
@Maahhee 3 ай бұрын
Is there any chance to avoid the fade or loose of light in the center console?
@alaskagarage 3 ай бұрын
Don't know if I fully understand. So far the only fairing I have had was due to a module going bad and that was in the door. I replaced that module and haven't had a problem since. The loss of light I've had is really only noticeable in certain angles is video but by eye being a wider range of view you don't see it unless if the light gets pushed behind the 2 panels it's inserted into.
@kennethjacobus7311 4 ай бұрын
As soon as you said back pressure we know you really don't understand harley engine
@derfskittlers6125 11 күн бұрын
Uh, maybe you don't understand combustion enginges.
@no_namefor_youtube7908 4 ай бұрын
So just to be clear before I buy anything, will this work on a 2016 Charger R/T WITHOUT preexisting factory performance pages and bezel buttons?
@alaskagarage 4 ай бұрын
@no_namefor_youtube7908 yes and since your not 2018 or newer you won't need the security bypass
@alaskagarage 4 ай бұрын
If you have any issues just reach out I will help you through it
@no_namefor_youtube7908 4 ай бұрын
@@alaskagarage I appreciate you! I'll definitely reach out if I hit any snags.
@no_namefor_youtube7908 Ай бұрын
@@alaskagarage Just completed the install, went very smooth. Thank you for posting this video!
@alaskagarage Ай бұрын
@no_namefor_youtube7908 awesome your welcome
@ihopetospeed1 4 ай бұрын
FYI Andrews makes the Wood cams
@dcater100 4 ай бұрын
Really thankful for your video, helpt me very much. Thanks 👍 regards from Holland
@alaskagarage 4 ай бұрын
@dcater100 my pleasure glad it was able help someone out
@jeremyolguin7116 4 ай бұрын
I don't see how they are getting those hp increases from just a cam and nothing else my 103 was bored out a little forged pistons sns 585 cams with 10.6.1 compression only made 100 hp
@brandinellis2003 4 ай бұрын
I put the 543 fuelings in my 96 and im.not impressed high 3rd gear into 4th is pretty hard pull but to get to that isn't shit for pull had it dynoed and it was 94 and 97 def not very happy .... I'd stick.with woods or adrewes 26 cam..
@CarlosRamos-dj5vw Ай бұрын
What woods? 222? Thanks for sharing was looking at that 543 cam. Thank you for saving me the disappointment.
@aleex90a 4 ай бұрын
Great job, i really want to do the same in my fatbob 2014 Can you please share links if it’s not too much trouble?
@bobdlowrider 4 ай бұрын
I have a 2007 Dyna FXD. It was stage 1 with an FP3 tuner. Recently, I had a Feuling cam chest with a Reaper 543 cam put in and SuperTrapp Supermeg pipes put on. It was tuned on a Dynojet with a Power Vision map. It made 95.48 hp at 5750 rpm and 104.93 torque at 3560 rpm. My freeway mpg is 47. I really like this cam. It's just loafing along at 80. I dont want to back off, even when I have to. The whole rpm range is smooth. I got this cam mainly for touring.
@tomconner5067 4 ай бұрын
Dyno runs in 6th gear isn’t that in overdrive?
@briansondgeroth9674 4 ай бұрын
I'm surprised that you didn't start that carpet on fire grinding and throwing sparks on it. The bags look good. Thanks for the video. I may have trouble with my '04 Dyna. I have screaming Eagle dual exhaust on it and I'm not sure the bags will fit on it. But, I'm certainly going to try.
@alaskagarage 4 ай бұрын
@@briansondgeroth9674 lol no fires 🔥
@FTW_Bryan 4 ай бұрын
E😮
@thegamingbears2600 4 ай бұрын
Can u send me a list of all i need to buy to make this work in my 2018 dodge charger rt i just want the performance pages plz
@alaskagarage 4 ай бұрын
Absolutely i updated the description to have links to everything you will need. i would suggest using the mx+ it make it easy some say that the clear blue ones do work but some also say it doesn't so if you try that you might be throwing your money away. You will need the double bypass and there is a link to that in the description. you will need the alpha obd app its on android but if you don't have an android you can use a windows pc instead. The app does cost money but you will find it useful for more than just the performance pages. I've used it so far for the DRL drop so the car doesn't do that one eye thing when turning, changing the headlights out to LED and making them not flicker, and a lot of other things as well that's just to name accouple.
@nealherrier 25 күн бұрын
I have the 2018 dodge charger set plus. Will these features work it as well?
@keithstephens7395 5 ай бұрын
Nice video sir, you could have put spacers on the braces to get more clearance also.
@alaskagarage 5 ай бұрын
@keithstephens7395 thank you I still can't get enough of this exhaust it's perfect 👌
@keithstephens7395 5 ай бұрын
Yes your video convinced me to order mine can’t wait one question was it hard to pull the old exhaust off any tips would be greatly appreciated.
@alaskagarage 5 ай бұрын
@keithstephens7395 biggest pain was getting the pipes to separate after loosening or removing the clamps after the cats. Make sure the car is secured well. I had to pull rather hard and wiggle it.
@TjSturgill 5 ай бұрын
Great video. I went through a week of bs video and got nothing. I watched this video and got everything working in 20 minutes.
@alaskagarage 5 ай бұрын
Very nice glad it helped any other features you might want someone to figure out
@nickllamas3720 5 ай бұрын
Brother Screaming eagle is badass
@tillmanfamilyfarm7759 5 ай бұрын
How did the rear blinkers turn out? Do they fit back in there?