9 ай бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
6 жыл бұрын
6 жыл бұрын
Пікірлер
@kingoflund5597 4 күн бұрын
I bought a used Pro-200. Unfortunately it had a clogged printhead. Made a bath like shown in this video. Used a little bit more ammonium. Had it sitting for 3-4 days. And it worked. Thank you for the informative video
@xx_faz1329 4 күн бұрын
Worked for my Z6200 Designjet. And I did turn mine off alot. . Thanks
@Roblox-zd6hz 5 күн бұрын
I’m so fucking mad
@craigrosa7722 5 күн бұрын
Thank you so much for this very informative video!
@gregrosenheck8852 7 күн бұрын
I didn't get the printer yet. I'm expecting it in a few days. I wanted quality but also ease should the ink dry out. I had a $500 ET-7700 printer it printed beatiful photos but I don't print every day and I left the printer not to print for almost a year. As expected the Ink dried out. I tried to the mantience that Epson said and it didn't work. I'm confued on how to clean the heads and you can't replace them. So I found this printer the G620 and those printer heads can be replaced and you can pull them out to clean. So I am taking my $250 gamble and getting this, plus from what I understand the quality is good. I liked your review thank you.
@kevinoverbeck4250 10 күн бұрын
I messed with the power cable and tried another. It worked. Thanks!
@sexyvada21 13 күн бұрын
What’s the best sublimation ink
@giorgos7six 18 күн бұрын
Hi Andrew, very nice video!!! I was wondering… shouldnt those cartridges, be clogged free, if they were filled with Canon’s inks (GL43, GL56) ?
@4aneme8R 22 күн бұрын
Not covering RG6Q
@terribrophy7554 22 күн бұрын
My printer will not take the black ink. I put the bottle on but it doesn't go in. I've run all of the cleaning options.
@dsp4392 27 күн бұрын
These things are so poorly designed. Thank God for Logitech. Can't wait until Apple "invents" screws.
@tsing138 Ай бұрын
Thank you sooooooo much!!!
@tristangauvreau224 Ай бұрын
How do you get that quality? I do own the g620 and ive never been able to get any decent results...
@garycampesi9736 Ай бұрын
Well... that was a huge help! Thanks much. Subscribed.
@maartenleonvideo Ай бұрын
Is there also a version that can do larger size prints?
@Gypsytash Ай бұрын
My epson 2810 ecotank that I use for sublimation won't let me print to correct sizes for seamless 20oz tumblers I can print it correctly on my regular printer but for some reason it won't on my epson. Please help I'm going insane and wasting so much sublimation paper
@maclexi0 Ай бұрын
Hello. i have 2 of this parts. One of this gone in the Trash. Unrepairable Kable. Screws. Contacts. No way.. Trash. But,,,,,I buy a new one. 😅
@zinkadu Ай бұрын
For us living in Europe: is thet another name for the isopropyl alcohol and ammonia?
@patrickdurees3025 Ай бұрын
just an update for those that are gonna try this i got one of these today and the way i did it was with a syringe with the needle attached that you can use to refill cartridges i use it to just slowly squirted some fluid so it just covers the round part where the cartridge sits leave it 5 mins then check to see if the ink is coming out the bottom on the paper you put there,if so then all i did was suck up the fluid from each section then slowly squirt it onto the round part where the cartidge sits kept doing this for a few mins then just left it sitting there for another 5 mins then redid that again to be on the safe side then sucked up all the fluid from the top then double checked underneath to make sure ink was still there on the paper ,then put printhead back in printer and alls well,took me this long for this one cos first time i have done this type of printhead
@patrickdurees3025 Ай бұрын
thats the long winded way to do it,cos if its anything like the epsom printers far easier way is to buy some nozzle cleaning solution that comes with a syringe and some plastic tubes and just slowly inject the solution into the print head from where the ink cartidges go,works everytime on the epsoms not tried it on this model of printer,unless anyone knows different
@U2BER2012 Ай бұрын
I have a klein dedicated stripping tool for RG-6 coaxial and still end up breaking the delicate wire mesh shield wires. It's frustrating!
@brentthomas6312 Ай бұрын
You didn’t think to switch the caps lol
@steveoleniak3656 Ай бұрын
very helpful...thank you!
@IngwiePhoenix_nb Ай бұрын
Late to the party. Just broke one of these connectors and had to shorten the cable down and thus apply a new connector. Thanks for the help!
@cameronsmielewski750 Ай бұрын
Are you using pure ammonia, or an ammonia based cleaner?
@Bravox84 Ай бұрын
Well, the printspeed is realy ..... but: "gut ding will weile haben" (good things take time) :-) Thanks vor the Test
@koyotekola6916 Ай бұрын
This is probably the worst video showing how to make a RG6 compression fit. You do NOT want to manually strip the cable jacket and what he calls foam. It's actually dialectic material. And it's misleading that you don't need tools. You have to hve a compression tool and stripping tools. Comparing a compression fitting to a crimped fitting is totally, totally different. They shouldn't even be shown in the same video.
@sureshattorney6055 Ай бұрын
As far as Canon G670 ots due to the red colour Pictures look bright but if you observe closely pictures contains grain like dots, comparing with a Epson this difference can be noticed.
@johnasby1351 Ай бұрын
will this procedure work for a wf 1100? was going to by a new head but can't find any videos or instructions on how to do this
@kevondafuller4542 Ай бұрын
MOST DEFINITELY very useful info. Thank u. I was wanting to start a small lil project at home doing shirts & stuff for family gifts. ❤
@cherriefeacabo9093 Ай бұрын
Hi, I just bought an Et 2850. AI never use it yet, however i want to convert it to all pigment ink. Is it possible and also, where can I buy the pigment ink?
@eringordon1152 Ай бұрын
min isnt clogged it just doesn’t print green images right
@jeffreymcwhorter9360 Ай бұрын
Semm many finding fault as for me this was extremely helpful and inexpensive. Thanks, better yet he went straight in showing you how to do it no nonsense
@jonathanj3277 2 ай бұрын
The little removable head cleaner part you held towards the end of your video has disintegrated in my vcr. Is this part replaceable?
@marioarty Ай бұрын
You’re better off not having it, nowadays they make VCR’s worst since they get so dirty, so you don’t really need it
@dawgrules1 2 ай бұрын
Good information, thanks ! I'd rinse the clean head in IPA instead of H20 to displace and water in and around the PCB and also speed the drying process
@r.bailey7343 2 ай бұрын
Biggest clickbait of the century. You skipped over the actual part where you connected the ribbon. Misleading title.
@JohnJDeanJr 2 ай бұрын
Pixma Pro-10 relatively new with very few print hours on it . 17 Flashes and it WILL NOT connect to the network or software = (
@davidwillis5016 2 ай бұрын
Thanks
@JenniferPickering-x6s 2 ай бұрын
Paper going to jam so I pulled it out while print started. Now it won't print when I restart a new print job. How do I fix this?
@WillPerc45 2 ай бұрын
thank you, i love you, ur a life saver
@MsPopette1 2 ай бұрын
Here in 2024... thank youuuu 😊😊😊
@jochemvangalen9464 2 ай бұрын
still have issues with colors after cleaning anytips. replaced all cartridges
@patrickdurees3025 Ай бұрын
try cleaning nozzles again or if still the same print head is probably faulty,some people continually try to clean nozzles with inbuilt programm of the printer that tries to force ink through the nozzles to clean them which can damage the print head if you try that too many times hope that helps,the way i do it on the epsoms is with head cleaning solution with a syringe and a plastic tube that you connect or i connect needle that you can use to refill cartridges to the round part where the cartridge sits and slowly inject the solution into the print head sometimes can take 3 or 4 goes to get it woking 100%,had 1 epsom not used for over 3 years and it worked 2 time just depends on the abuse the print head has taken if someone keeps trying to clean nozzles with the iinbuilt programm of the printer which can damage the print head if thats tried too many times,goodluck
@jochemvangalen9464 Ай бұрын
@@patrickdurees3025 i think its broken it mixed the co with blue.
@patrickdurees3025 Ай бұрын
@@jochemvangalen9464 if you have put wrong colour in 1of them just flush out the print head from the one you have put wrong color in, the way I suggest just like cleaning the print head for that 1 color then print a nozzle test page you might have to do it more than once to get the right colors back but should be ok but might take you a bit longer good luck,you have not broken it if all you have done is put the wrong color ink cartidge in the wrong color slot
@jochemvangalen9464 Ай бұрын
@@patrickdurees3025 was the correct one
@Dish500_guy 2 ай бұрын
Thats not cable tv wire. Thats from a satellite dish most likely a dish 300
@eveningskysreflections 2 ай бұрын
My epson2803 sublimation was printing fine now no color I tried everything except the paper towels thing any other ideas?
@matthew_pike 2 ай бұрын
Worked perfectly for me! Black, cyan, and yellow wouldn't work despite 2 deep cleans. I made 130ml of the solution , poured it over the hole areas on top with a paper towel on the bottom, and let it soak for a few hours. After that I let it dry on a paper towel. Thank you so much!
@legosandBeyond. 2 ай бұрын
How do you make the cleaning solution ? Please help
@thairish5053 2 ай бұрын
Very helpful, thank you. Just unblocked my HP black head.
@fionalipscombe 2 ай бұрын
Hello. I tried your solution and indeed I can print but the print alignment is completely out, so my printed page is unreadable. I did get a message on the display that warned this might be the case. Any suggestions?
@Tagumenya0325 2 ай бұрын
Its not working for my printer😢😢😢
@Oleks-fg5pt 2 ай бұрын
охренеть , работает