Walk around of my 03' DSG cobra
13:06
Onto the next chapter
5:24
7 ай бұрын
Пікірлер
@andrewclark6572
@andrewclark6572 2 күн бұрын
Car is looking great. I love chrome wheels on DSG but those machined wheels look great.
@jamiesvt
@jamiesvt 4 күн бұрын
You guys got some white gold lol
@artvandelay837
@artvandelay837 4 күн бұрын
i'd sell my soul just to lick the snow of where those tires sat. 10/10 car
@Beast_In_Motion
@Beast_In_Motion 4 күн бұрын
Breathing good, healthy 🐍❄️
@SVTTAY
@SVTTAY 5 күн бұрын
That thing sounds nice man. Purring perfectly. What size are those wheels?👌
@loscar5oh
@loscar5oh 4 күн бұрын
@@SVTTAY thanks man and that's with the stock exhaust! Those are 18" from LMR
@OnTeamHumanity
@OnTeamHumanity 5 күн бұрын
Out and right back in 😂
@loscar5oh
@loscar5oh 5 күн бұрын
That's right! 😂 I barley made it back in lol
@paulciprus9582
@paulciprus9582 5 күн бұрын
Paul from Ohio…now 7 degrees…..great video…..😊.
@Lethal_Venom
@Lethal_Venom 5 күн бұрын
Snow in Texas.....sucks doesn't it lol. Try living up here. Had to snowblow when I got home from work tonight from last nights storm.
@loscar5oh
@loscar5oh 5 күн бұрын
Man I can't imagine! Just having one day of snow is enough for me 😅
@Lethal_Venom
@Lethal_Venom 5 күн бұрын
@ It was -12 this morning when I left for work. Warmed up to -8 by the time I got to work lol
@S550Ducky
@S550Ducky 6 күн бұрын
Sounds amazing! What chamber arms are you running? I’m on eibach sportline springs but I’m hella chambered
@OffTheSkooma
@OffTheSkooma 9 күн бұрын
Did you did you get extreme low? I heard some people say to get extreme low over the other options because it doesn’t get low enough
@dannydavito438
@dannydavito438 10 күн бұрын
how much space is between the wheel and upper control arm?
@GoodCitizen4U
@GoodCitizen4U 10 күн бұрын
The car has the mustang emblem in the grill Bcz I swapped the cobra before I sold it.
@GoodCitizen4U
@GoodCitizen4U 10 күн бұрын
That yellow cobra is the same on in my profile pic. I have original parts to it if u want them. I’m in Oklahoma. Sold the car to Marcos in Dallas.
@GoodCitizen4U
@GoodCitizen4U 10 күн бұрын
I still have original parts to that zinc yellow cobra.
@Florian_Cz
@Florian_Cz 11 күн бұрын
Wow❤
@coopervaughan4042
@coopervaughan4042 11 күн бұрын
what rims do you have on your car?
@loscar5oh
@loscar5oh 11 күн бұрын
@@coopervaughan4042 on this car I had CCW classics
@lukyanrosselli
@lukyanrosselli 14 күн бұрын
Thanks man 🧡
@alejanrdrocano849
@alejanrdrocano849 19 күн бұрын
My questions, does your headlight still turn on or did you disconnect them to connect the LED lights?
@tuser556
@tuser556 24 күн бұрын
Did you change out the small Mach speakers by the driver and passenger mirrors?
@shanefuoco5563
@shanefuoco5563 25 күн бұрын
Hey killer truck!! I have same setup on my 2018 5.0 sport 4x4 although my tires are 275/65/20 on stock rims w a leveling kit as well… I’m looking at the K02s as my next set but these tires are 325/60/20 u think w the wider tire there will be some rubbing?? Let me know ur honest opinion TIA!! 🫡🙏🇺🇸🫡🙏🇺🇸
@MattLarson-q4f
@MattLarson-q4f 8 күн бұрын
depending how high your leveling kit most likely yes you will rub! outside will rub on the outside rear side of the wheel well and the right front corners of the bumpers and chew your tires apart or make them look like crap.
@nicolasmeza7799
@nicolasmeza7799 27 күн бұрын
What's your wheel and tire profile?
@loscar5oh
@loscar5oh 26 күн бұрын
I got the info in the description
@valentingarcia4137
@valentingarcia4137 28 күн бұрын
did u sell the wheels ?
@tac_r_usoutdoors8984
@tac_r_usoutdoors8984 28 күн бұрын
Sounds like shit
@teejay3237
@teejay3237 Ай бұрын
Do you smell the fumes in the car with it mounted right there?
@roygarcia5568
@roygarcia5568 Ай бұрын
What does it measure from the ground to the fender i wanna get the exact same tires but i wanna know if it will rub would you happen to know?
@83178
@83178 Ай бұрын
How do you remove the cover of the back speakers without all the seats needing to be removed or you can’t ?
@BraaapoholicBob
@BraaapoholicBob Ай бұрын
great looking truck my friend
@tn6504
@tn6504 Ай бұрын
do you think 2.5" lift would have eliminated rubbing 100% ?
@ThomasGeathers-m4m
@ThomasGeathers-m4m Ай бұрын
Big love fam
@Saren_95
@Saren_95 Ай бұрын
I have the same setup on mine, love it. Not too obnoxious when you’re just driving along, but sounds so good when you punch it
@JoJoswrld999
@JoJoswrld999 Ай бұрын
How’s your gas mileage since you’ve had then on any decrease
@loscar5oh
@loscar5oh Ай бұрын
@@JoJoswrld999 it's decreased about 1-2 mpg
@JROC734
@JROC734 Ай бұрын
Are we talking cars or engines? Coyotes are absolutely better engines than Modulars. Even your GEN1/2 Coyotes are noticeably better. The GEN3/4 Coyotes are way better. Does that mean you can't mod a 4.6L DOHC Modular to make a lot of power? No, but when you get down to it, and throw the same stuff at both engines, the Coyote will make quite a lot more power, especially when talking factory sealed engines. Both engines will handle much more power than OEM, but I'd give the longblock strength edge to the GEN2+ Coyote. Terminator LB's are stout, but you have to be smart, disciplined, and have your setup dialed in right. You can burn up a stock Terminator engine with the quickness at say 450 WHP if sustained overdrive pulls are your thing. Coyotes on the other hand don't suffer from cooling issues, and some of the design flaws, and gremlins that came built into the Terminator engines. 800-850 WHP is a pretty safe area for a factory GEN2+ Coyote to operate in, and most people operating in that HP range with a Terminator are going to be going built in not too much time as they're putting a lot of stress on a factory seal Terminator LB to reach that HP #. I mean a Terminator has too tight a piston to cylinder wall clearance, it doesn't move air nearly as efficiently as Coyote, it CR is way low by modern standards, and they require way more boost for any given blower or turbo setup to make X power than with a factory Coyote, especially the GEN3/4 Coyotes. Are the Cobras Manley H-Beam rods cool, and strong even with the factory 3/8's rod bolts? Yes. Are the pistons inherently strong? Yes, as is the iron block, and Kellogg crank, but these components are very stout in a 5L as well, and its factory based aluminum block/heads have supported north of 3K WHP. Don't get it twisted Coyotes are the bomb. Comparing a DOHC 4.6L to a modern Coyote is like comparing a GEN2 LT1 to a GEN5 LT1. Which car is cooler, and which is more special for what it is, and represents? Terminator. It's just a beast. It's a pissed off car that straight ripped for its era, and like a MKIV Supra TT, or R34 GTR it won the hearts of its fans, and enthusiasts. Understandably so, but just like the reality is that a R35 GTR will beat the brakes off a R34 GTR, so will a modern Mustang 5L do to a Terminator. But a Terminator like a R34 GTR is cooler than its successors to many people. The Terminators look, sound, raw nature, value, ease of modding, tuneabilty, uniquiness, and what it represented for Mustangs back when it was introduced just stirs the soul. It's just a damn cool arse car.
@loscar5oh
@loscar5oh Ай бұрын
@JROC734 well said brother 🤜🏼🤛🏼
@matthewdiaz2074
@matthewdiaz2074 Ай бұрын
My man this car needs tint !
@loscar5oh
@loscar5oh Ай бұрын
it really does! lol
@anthonyfarruggia935
@anthonyfarruggia935 Ай бұрын
Badass man. Awesome car u have. These cobras rlly put a smile on ur face when u drive them. Wouldnt sell mine for the world.
@OnTeamHumanity
@OnTeamHumanity Ай бұрын
Why no long tubes?
@loscar5oh
@loscar5oh Ай бұрын
@OnTeamHumanity as much as I like long tubes, I just want to go a different direction with this car. I'm trying to go for the sound shown in the clip of the black cobra
@OnTeamHumanity
@OnTeamHumanity Ай бұрын
@loscar5oh did you experience any issues with your American racing headers? I'm probably doing them early next year. Only thing I worry about is that they hang too low. I'm aiming for 700whp. If I can avoid the headers and still hit that number I probably will.
@loscar5oh
@loscar5oh Ай бұрын
@OnTeamHumanity for the most part they were good. The 2 main issues I had was that the passenger side header would touch the trans tunnel but over time it cleared on its own. And the 2nd thing is that yes like all other long tubes they hung a little low and I scrapped a bit over speed bumps. But then again my car was really low as well.
@OnTeamHumanity
@OnTeamHumanity Ай бұрын
@@loscar5oh you think I can hit 700whp on factory headers? Or should I go for some mid length? I want to be able to drive the car without hitting things constantly. My cobra is dropped on Maximum Motorsports Springs.
@justin.c_svt
@justin.c_svt Ай бұрын
That’s really cool. I enjoy my Orange stock Cobra a lot. It is a very nice car the way it is. And you’ve had both and I’ve had both modified too.
@joeyb7578
@joeyb7578 Ай бұрын
That cold start got me, she's quiet
@loscar5oh
@loscar5oh Ай бұрын
That'll change soon bro 👀
@Lethal_Venom
@Lethal_Venom Ай бұрын
Wish I was still driving mine. Its done for the winter season but I made it a few days into December lol. Looking forward to what you do with this one.
@CheesusSVT
@CheesusSVT Ай бұрын
Hell yeah man, haven't seen someone film it like this in a minute too. Love these cars... Perfect balance of power and raw mechanical feel for the street. Something we have lost touch with over the decades. ❤🐍These cars are just a blast!
@loscar5oh
@loscar5oh Ай бұрын
I completely agree man. I've had both the new and old and I'll say there's nothing like a car like this 😏
@vaderlee601
@vaderlee601 Ай бұрын
Sounds thunder ⚡
@chicleSvt
@chicleSvt Ай бұрын
Hey bro send me the link where you bought those hood vents Thanks l need to get some for my cobra
@loscar5oh
@loscar5oh Ай бұрын
I'm having trouble getting into the website but search venom prototyping on your browser and it should show up bro
@chicleSvt
@chicleSvt Ай бұрын
Thanks bro nice cobra check mine out is a bad ass to
@AdamSVT
@AdamSVT Ай бұрын
They look amazing.. I might be one of the last Terminators with mods but stock hood blanket and vents.. lol.. It's all in great shape so I don't want to swap.. also.. love the 18s.. great stance.
@loscar5oh
@loscar5oh Ай бұрын
I don't blame you, I think the oem heat extractors are really nice as well. I'm definitely keeping mine. It's an easy swap if I want do put em back on 🙌🏻
@KyleSVT
@KyleSVT Ай бұрын
Looks sick! Love they are 3d printed and don't have to modify anything
@loscar5oh
@loscar5oh Ай бұрын
Exactly man that's a huge plus!
@Lethal_Venom
@Lethal_Venom Ай бұрын
Those vents are great I got a set of those when they first came out. Chris is great to deal with
@loscar5oh
@loscar5oh Ай бұрын
Definitely a nice mod for the money
@joeyb7578
@joeyb7578 Ай бұрын
Those reps look great brother.
@loscar5oh
@loscar5oh Ай бұрын
I appreciate it bro!
@yerrymartinez
@yerrymartinez 2 ай бұрын
One of the most beautiful new edge I’ve seen😊❤
@armandperez1787
@armandperez1787 2 ай бұрын
I have a 2017 Mustang Gt base model but want to get a new bumper and a quad tips Corsa Xtreme, Any suggestions on how to do it ? Thank you boss
@lawtondevil
@lawtondevil 2 ай бұрын
all sound and no go.. I had one my 1989 v6 camaro smoked it.. lol
@julianreudink3858
@julianreudink3858 2 ай бұрын
Nice Car! In Germany we dont have this Terminator😌or very rarely.
@jnagime
@jnagime 2 ай бұрын
Sounds nice,what year is this and any issues with the transmission?Thanks.