Nope tried it 2 times doesnt work waited 3 days still cloudy .level chemistry perfect no clue ready to close it!! Vaccum 2times a day pump is running 24/7 still cloudy no algae in pool .i m clueless what to do next
@stphotoNYCКүн бұрын
The question is how many meters the level has to drop since you can’t measure the volume you’re removing, you just have to approximate this I guess.
@GippaTV13 күн бұрын
Concise video thanks - I was freaking out after adding Algae remover and pool instantly went a little cloudy. I saw a little algae on wall of pool - hoping I was getting on top of it before it got worse - this was day before 4th of July Pool party!😭
@lacielightrainbowraeintheg76375 күн бұрын
💦🐬💦🙌🙏🙌
@coolti446 күн бұрын
Pool RX (drops mic). You will NEVER have algae again.
@Ionizap13 күн бұрын
My Summer Waves above ground pool is running around 4000 bbl after filling this year. Last year was fine. Nobody has any idea why it's so high and the water from the tap if was filled with is normal. The phosphate remover I bought from our local pool store make no difference so I am trying again.
@megangoodwin601617 күн бұрын
I shocked and then used flocculant and it still didn't work. I think the algae is not killed. What do I do now? How do I get the algae killed? I've already shocked and used baquacil algicide.
@flex_00717 күн бұрын
Helpful video, thanks 🏊♂️
@Falonspeaks17 күн бұрын
I shocked and flocked and it isn't sinking 36hrd later... should I shock again on recirculate?
@BeachLover-kn5ov18 күн бұрын
I've used the flocc and let it sit for 24 hours wnd vac to waste and its still very cloudy. My ph and chlorine are within range and I have a sie way test kit that I have no idea how to use for testing the other things
@davidhilborn153623 күн бұрын
Well, I came here looking for answers about phosphate remover in my aquarium, and I got my answer here 😂 Thanks!
@PoolAdvisor16 күн бұрын
You're welcome!
@w.l.graves722828 күн бұрын
quantity / formula to add is on every package , didn't need a grade school math lesson , i was expecting info about a most important aspect of cyanuric acid , = the proper application ..a video demonstrating how and where to add it to pools .. there is good and bad info out there . not much here ..
@mrsunmaid28 күн бұрын
Very well explained. I can't keep a good chlorine reading. I was told it was because phosphate reading is about 1000. If I use phosphate remover will I get a good chlorine reading when I add chlorine again before I remove the altered phosphates from the pool?
@MMorMMАй бұрын
Excellent info, and delivery. I didn't know that phosphate remover only works on phosphate not locked-up in algae. Very good, and thanks.
@PoolAdvisor16 күн бұрын
Glad to help!
@TAaron-fq5vfАй бұрын
very good
@SacCityFD56Ай бұрын
Thank you, excellent information.. my level is 1200 ppb, with very little algae growth on a few areas of the walls, oil looks great.. free chlorine 4.5, they want me to use NoPhos 103oz, run pump for 48 hrs straight $$$😮..uh, no -not doing that I’ll be broke, what do you recommend, just add when pump is on normal cycle, I did buy new filters, should I not install them until I treat and run ? ..appreciate any help
@annaj739Ай бұрын
Ty! Very helpful!!
@PoolAdvisorАй бұрын
No problem!
@DeathValleyWarthogАй бұрын
Your videos are great. The settings for you audio (I presume a compressor) are so drastic that is very annoying to listen. Understand that for you it might sound cool, because you are the one talking and you sound very "punchy". But for a listener is very different. Think video games: if you are playing, no matter how fast, it's all good. If you are watching the screen when somebody else is playing fast, you get dizzy. Same thing. Just my 2 cents, I've been a sound engineer for 30 years. Cheers.
@ShrixxuАй бұрын
Lmao the health department closed my teams pool because they put SO MUCH phosphaste remover that a week after it was super cloudy and was clogging filters
@marieque6628Ай бұрын
Thank you this was so helpful. After farting around all day on this pool I think I may finally have it right. Tomorrow i hope to wake up a pool with clearer water
@PoolAdvisorАй бұрын
Fingers crossed!
@carolann123Ай бұрын
Very helpful! Thank you!!!
@PoolAdvisorАй бұрын
Glad it was helpful!
@stangmike11Ай бұрын
Thank you this was very handy
@PoolAdvisorАй бұрын
Great! Good luck with keeping your salt level under control!
@stegall9Ай бұрын
Thank you so so much!
@PoolAdvisorАй бұрын
You're welcome!
@bobmurray8073Ай бұрын
Very helpful, easy to understand, and spot on with our current pool issue. Thanks!
@PoolAdvisorАй бұрын
You're welcome!
@heatfist62 ай бұрын
Thank you this video was helpful
@PoolAdvisorАй бұрын
Glad to hear it!
@RicardoMachin-hn4hs2 ай бұрын
What's the best vacuum to pick up that dust ?
@mylivetrainers2 ай бұрын
Thank you so much. This just cleared up so much. You don’t know what this video has done for me. My pool looked fine, but the person at the pool store told me that I had high levels of phosphates, and as soon as I put it in the skimmer the next day, it was cloudy which made me really upset, but after watching this video, I actually googled, and this was the first video that came up on the search After listening it makes perfect sense now. Thank you
@PoolAdvisorАй бұрын
I love reading comments like these! Good luck with your future pool maintenance.
@omarcito333162 ай бұрын
bro you over explained the stabilizer part move on brother
@HAULUUZ2 ай бұрын
I’ve read that saltwater pools require more between 60 to 80 ppm
@richardoverens85822 ай бұрын
Very useful thanks!
@PoolAdvisorАй бұрын
You're welcome!
@xavianou27812 ай бұрын
grate
@KL-ov2es3 ай бұрын
If you're watching this, the numbers are off and vague, the calculator doesn't mention %s whatsoever. Look elsewhere
@modut62583 ай бұрын
Great explanation thanks
@PoolAdvisorАй бұрын
You're welcome!
@wildwillie61323 ай бұрын
Thanks
@kylaidoscope3 ай бұрын
Hi there, I am getting a very high content of "calcium" or pasy, white residue from a new brand of chlorine granules I have been using (I am in the Philippines and it is very common to cut anything that can be cut with whatever cheap additive they can. This looks like the chlorine has been cut with chalk or something worse as it is causing build up on my skimmer, pump and pipes and constantly leaving residue on my pool floor. I guess to confirm this to a sell that I am complaining to, should commercial, chlorine granules dissolve in water or is it normal that there is quite a lot of "chalky"residue? Thank you.
@mikeh77045 ай бұрын
I stumbled across your channel searching for "how to fix green pool after rain". After the recent storms in SE Qld, my pool has turned the dreaded green colour. Added chlorine (calcium-based), which raised the calcium hardness a bit too much. Then bought non-calcium based chlorine which has helped. Quick question: are there follow-up activities related to the filter (I have a sand filter) once the colour returns to normal? Thanks for the tips from a fellow ChE. Subscribed, and all the best with your channel!
@timfudy31476 ай бұрын
Thanks, just the info I needed
@sarsalam16 ай бұрын
Thank you so much! This is the first video that provides a dose calculator to address high alkalinity. Brilliant!
@PoolAdvisorАй бұрын
Glad it's helped!
@LuRuello7 ай бұрын
I had to add a lot of PH Up to balance my pool and this has left a white cloudy substance that resists flocculant. What now ? Thanks.
@salessales53002 ай бұрын
just keep running the pool it should clear.. mixing ph up in water first can help to stop this happening if you need to add alot... adding a clarifyer might help to.
@elbertbracey70917 ай бұрын
what if you cat see the bottom what should you set pump to
@1abigail99Ай бұрын
Recirculation, especially if you have sand pump. U never want to run it on filteration with floc in it or ur sand will look like kitty litter, all clumped. It will ruin ur sand filter. You want to wait for it to settle 1-2 days and then slowly vacuum all that dead algae and debris to waste along with that floc. Then let it filtrate for a few days to see if the rest will clear.
@bill830pc88 ай бұрын
Great video, I will definitely try the calculator and let you know.
@user-tp3qs9rb6y8 ай бұрын
Best explanation of the relationship between something being alkaline and pool alkalinity available. Most importantly it's in metric units. It has been impossible to find anything that isn't in gallons. Also that doesn't omit the small matter, that the volume of the pool effects (defines!) the concentration. However, there remains the issue of guessing what mg/L concentration a coloured strip is. I guess a proper pH meter is required. Thank you Louis: A proper scientific explanation from a proper scientist (chemist).
@PoolAdvisor8 ай бұрын
Thanks for the kind words! I'm glad I could help.
@mujahidsheikh40488 ай бұрын
Dear I have 2700 m3 swimming pool and it's too cloudy after the rain. I make CL level 4ppm. PH is 7.30. Cyanuric is 33 and also I putted algaecide still cloudy. can you please tell me what to do ?
@shilohthomson25182 ай бұрын
If you have a cartridge filter take it out and clean it, if you have a media filter give it a good back wash... add a clarifying agent for ex polysheen and run for at least 12 hours or even better a whole day and night... if your still cloudy have a look at how old either your cartridge is or your media... cartridges normally need to be replaced every 12 to 18 months.. and media is 5 years for sand 10 years for glass . Hope that helps
@barakraftar71219 ай бұрын
I have 140000 litres capacity pool .plz guide chlorine quantity in grams
@pattido7779 ай бұрын
This is informative and very helpful. Thank you
@LivingWithCTE9 ай бұрын
Will this stop your salt water pool from Producing chlorine
@alexjay848 ай бұрын
No
@loccha609310 ай бұрын
mmm not very educational, just selling add thats what it is...
@jimmyb49824 ай бұрын
Rubbish.
@KhunAdam11 ай бұрын
My pool has clear water but algae on the plaster wall surfaces. I robot vac every day and the chlorine levels are around 10 ppm now. (Maybe shocking the pool is necessary. ) The ph is 7.4. It seems the algae has formed a resistant layer and lives in the plaster. I am trying to eliminate a phosphate level of about 700 ppb and used the testing kit you feature in the video. It is easy to use. One issue is trying to find out how concentrated the various phosphate removers are and which are actually concentrated at all.
@johnkhan155511 ай бұрын
What is the correct level of salt my digital meter as salt % and ppl my pool is 32 cubic meter I've just changed to salt water
@johnkhan155511 ай бұрын
Sorry that should read ppm not ppl
@deborahmammana675811 ай бұрын
I believe the gallons in my pool are about 20,000. the salt reading I'm getting is 4500 or 4800 ppm's. I don't know how to convert the gallons to liters accurately