I need a good Guitar Center rep - the guys at my local GC are terrible. They don't know anything. Congrats on your purchase - those speakers are 🔥

Very nice setup bro! That’s a huge amount of truss and a massive structure. Lighting was nice, would have been nice with haze if the venue let you run it. 2 points I’ll share because I think it’ll really finish off the look. 1. DJ Booth - even if its a facade at this point, you put so much work into the structure, the your current DJ booth does not do it justice. 2. Truss Covers - They’re expensive IMO, but totally changes the feel and takes away that industrial look from your setup. Try it, and you’ll see the difference. Keep it up and I look forward to seeing more content from you. And I really like your style of video editing.

Just an advise. Try to install the power and signal cables over the structure bins instead hangging.

Really nice setup! Thanks for sharing. How do you get the speaker up? Is that a hoist?

🔥👍

Whats up bro! Very nice and clean setup, and a huge truss! I thought I was the only one in the wedding industry to do large setups, but Im happy to come across your channel. Subbed! And I’m so glad you ran haze! It needed it 100% with that venue and setup. You got the lighting nicely projected where it needed to be. The only thing I would add are some moving head washes, once you add them, you’ll see the difference they can make. I have a lot of gig logs too (temporarly had to take them down, but they’ll be back up soon). What lighting controller do you use? I currently use the WMX1 but I may be looking at something more capable to handle my large events. I think you understood the assignment very well. You had the lighting moving to match the music playing at the time in terms of color and speed of movement, most DJs dont understand this basic lighting protocol. Once again, well done and keep up those high standards!

Awesome job as always! Question, which chain hoists and slings do you use? Does TX require your guys to be rigging certiflied?

That was 🔥🔥

After so long we have not seen an upload after I don't know how long but finally but thank you for the content video

Glad you are back!!

How do i set a show to music

The setup is beautiful! (constructive feedback here: I would highly recommend a rig like this has baseplates under the truss legs)

Where can I find the big screens and side screens?

Where do you get your pack of effects for the video walls ?

Those were the oppsk wash panels? I been thinking getting those for my dj setup, and also thanks for let us see those 10r!! Im definitely getting those over the 7r

Another fantastic set up with great choice of gear - they just keep getting better. I will make two comments - 1. Don’t have your guys working off flight cases - if they fall off then you will be responsible - it’s not a good look for your company. Also while the two people are spotting the cases they are not doing productive work which is costing you money - use a proper work platform to be productive and stay safe. 2. It’s a great setup but somehow the DJ booth does not match the great look and looks a bit out of place My comments are meant to be constructive as I think you’re doing a great job and it’s great to see your company growing.

Your setup is AMAZING. I have to check out all of your gig log videos and TAKE NOTES.

Did you have someone sign off and the load for the rafters? I'm always super nervous to put a live load on a roof system like that without structural engineer approval or some kind of assurance that its safe to do. That would give me anxiety all night.

Really great - Please offer the scene for it so we can study it :-)

What is the brand of you led wall Thanks In advance

Manifesting that I will a setup like this too soon! 🤞🍀🍀🍀🍀

these people with their "this is too much truss" comments are a bunch of hating ass babies hahaha. This set up is sick, if I had the money and man power to set this up every show that my band had I definitely would. It's really sick and more people/bands will hire you if they don't mind paying for good quality production.

Oooh if i can get a few of these and do my outdoor preaching, I would feel like a millionaire

What’s the purpose of the line array if there’s no splay angle? How do you avoid the beam of death? Those cabinets have to be coupling weird

my DMX is running very slow with lag, I have a Mac 2021 M1, anyone with the same issue?

The older crowd…. lol at first it was funny to see the difference… then a little sad.

Where did you get your power distro?

Do you still like the QSC LA112's? Would you buy them again? What's the most amount of people they have handled? Any outdoor festivals? Great job as always!

Hell yeah, That's a badass system dude.

10:07 Can someone send me the link to the remix? of this song

How do I make my scenes small in Live mode, they are huge and take up too much space

can u share the files with us so we can download and edit

Nice set up and equipment.watching from philippines.more gigs god bless.

Nice

Post some more videos

That’s an absolutely insane amount of gear you brought to that prom. I’m located in NJ and can’t imagine what we would have had to charge a client for an event like that up here.

Simply amazing 👍🏾 How many people are in your crew?.

I have so many questions? What sound system are you using in this video? Looks amd sounded fantastic. Do you own or rent the scissor lift? What type of insurance do you need for this type of event? Do you own or rent your transport vehicle and what type? Thank you in advance... I think this set-up was fantastic and I'm sure its worth every penny for the customer to celebrate like that. Cheers 🥂

por que habla ingles y la musica esta en español? acaso tienen canal en español?

Bruuuhhhh.... this is for 6 grads???!!!! Six???!!! We have a tough time getting class size of 300 to spend more than $2000 up here in Saskatchewan.

When I linked two lights together, the second light cannot be controlled independently of the first, They are 18 channel fixtures. I set the first fixture to channel one and the 2nd to 19. That didn’t work. I tried all channels going up from 19 to 30. It doesn’t work. If I said set it back to channel one it works. It’s not the cable coming out of the DMX controller if I plug that directly into the second fixture it works. How did you control the individual fixtures Independently, please? I’m just using a standard slider DMX controller. Thank you.

Nice setup. It's just a shame that the sound guy doesn't know that wide coverage top boxes should never be splayed side by side like that. It causes phase problems that can ruin clarity and make things sound unnatural. But, oh well.

love the setup but the party was cringe

Your Top Crew tip #1: Use pliers when you should use a hammer!

Thank you for sharing this🙏🏽 I'm 18 years old and I've been helping my dad with light shows for his events and this inspired me to become someone like how you do it!!

What a light show! What light program do you use? Also do you have every fixture with a wireless dmx connected? This is next level!!

ADJ MyDMX 3.0 software engineer here: A huge tip to significantly reduce your scene counts for anyone wanting to learn a workaround way to programing in 3.0. You can have your strobe with one scene & group, and then combine with any color you want live + more. All you have to do is program your strobe scene with all the fixtures shutters on strobe, or in the effects tab you can use the waveform effect for the dimmer channels with a sawtooth pattern if the fixture doesn’t have a shutter channel. Make sure all other channels are set to “OFF” Then in your colors scenes, you set all your fixtures colors, and make sure all other channels are set to “OFF”. Then to turn on certain fixtures or all fixtures, or even dimmer effects, you have another group for your dimmer scenes controlling the dimmer channel and all other channels must be set to “OFF”. Same would go for moving head movement scenes, gobo scenes, etc. The beauty is, they stack in live mode (as long as they are in different groups) and have overrides. You can also utilize the release setting in the edit tab next to your timeline. Example: dimmer scene (all fixtures on), color scene (red) - you can now hit a strobe scene and your dimmer and color will still be set, but now you have strobing and could also change the color in real time due to in-group overriding. Once you deactivate the strobe scene, it goes back to all fixtures on (solid) with the color you still have selected. Scenes override other scenes even in other groups in ORDER from start to finish (usually). This allows you to have potentially X color scenes, X dimmer scenes, and only 1 strobe scene ((or more depending if you want different strobe types (sync strobe or phased strobe)) Now you don’t have to have a strobe scene for every color, plus all the color scenes on top. Think of groups as individualizing channels for your fixtures. I hope this helps everyone with making programing simpler! ((Also, if you ever have a scene not behaving properly, make sure in the scene (dimmer for example), ALL FIXTURES only have the dimmer channel set to “ON”, and the rest set to “OFF”.)) This method allows you to become extremely creative and free.

The set-up looks fantastic! Only thing I would say from a production standpoint. Would have black pipe and drape behind your truss. It would make it pop more plus you would hide all of your cases. Other than that, it looks great!

Que tal salen esas bocinas tengo dos qsc ks118 cada lado se podrá usar uno de esas cada lado?