3MM flat end tool will work perfect 3mm carbide 2 flute endmill
@lagesmanuna2 ай бұрын
RIP heatbed.
@tomasgodoy36552 ай бұрын
what kind of aluminum are you using, how hard it is?
@KiranKiran-yp1vl6 ай бұрын
Did you tried with external spindle??
@DisCubanPeteBro9 ай бұрын
what bits are you using?
@EliwazMoonites Жыл бұрын
I can see a way to use a kind of liquid that is put in via the same head after a first pass of the laser it puts down the liquids for the color then goes back over to etch in the color or colors. 4 color change would be a great start for something like that too.
@Edward3DFX Жыл бұрын
Kinda not awesome- pass on the snapmaker
@RixtronixLAB Жыл бұрын
Nice video shot, thanks, keep it up :)
@usurpinesusanti3149 Жыл бұрын
Wie siehts denn aus mit dem neuestem Modell ? Hat hier jemand schon mal Gelegenheit gehabt so etwas zu testen ? Der Artisan ist ja deutlich stabiler unterwegs. Ich würd ja aber hab das Gerät noch nicht geliefert bekommen, bestellt Weihnachten letztes Jahr.
@smcreativemicroart1409 Жыл бұрын
What are you putting it on that plate from time to time?
@thesaintarc Жыл бұрын
Hello, have you already tested the latest version V5.0.1 with a double printer head on a snapmaker 2.0?
@andydeslauriers8317 Жыл бұрын
How loud is it?
@dasoul37102 жыл бұрын
Besser auf Deutsch, da bluten einem ja die Ohren.
@JustJosh20 Жыл бұрын
English is not the yellow from the egg
@seanburke9972 жыл бұрын
Wow, nice
@yayser2 жыл бұрын
Your took tip diameter seems to be too large, use something like 2-3mm and use a single flute cutter.
@Collateralcoffee2 жыл бұрын
I have da German accent, jawohl!
@MandeepSingh-bt6km2 жыл бұрын
the depth shld be like 0.1mm that way the bit can cut aluminum away with the available power and structure of the snapmaker. Sure the time to do the job will go up but have to identify the sweet spot for depth. As far as loose structure is concerned see if there are loose screws and tighten it.
@lakme62722 жыл бұрын
How can I change ampre , Before connecting plug or after connecting plug
@MREV-Solar2 жыл бұрын
My charger failed some month ago. If I remember correct Amp need to be set by the card before plug into the EV.
@dhanalakshmisakthi26872 жыл бұрын
சீல்த
@Love2FlyKAP2 жыл бұрын
The real issue is the rigidity of the CNC router. You will never get rid of the chatter.
@foam272 жыл бұрын
use 3mm 3fl carbide endmill, depth of cut .127mm, feedrate 2000mm/min. 90% alcohol mist spray. Your welcome.
@GES19852 жыл бұрын
I wonder if you can use the new rotary module and do this
@emilyaustralis2 жыл бұрын
💚🌱🇦🇺
@technojoy-detroit91303 жыл бұрын
Cool video. Awesome music. 😎 What’s the name of the song??
@jimmiecox31833 жыл бұрын
Thank you!
@danielodermatt99973 жыл бұрын
Guten Tag Ich bin mir am überlegen den Snapmaker 2.0 zu kaufen. Ich möchte damit Schriftzüge in Messer gravieren oder z.B Beschichtete Alluminium Teile gravieren. Im Video sehe ich dass es Funktioniert aber wie sieht das mit grösseren Flächen aus ? also eine dickere Schrift ? Hast du evtl. Bilder von deinen Projekten.... ? oder meinst du das der Laser zu schwach ist...? Vielen Dank jetzt schon Gruss Daniel
@MREV-Solar3 жыл бұрын
Als 3D Drucker OK , Metal gravieren geht so gut wie nicht , und fräsen nur fuer weiches material, alles aus holz und plastic ist ok. fuer das was du machen möchtest nicht zu empfehlen
@TheNikoboxMan2 жыл бұрын
Mit dem 10W Lasermodul für den Snapmaker 2.0 kannst du sehr gut Metalle gravieren! Hammer das Teil
@jeffreyritter21473 жыл бұрын
Ur also climb milling, try conventional milling meaning ur cutting backwards in simple turms. Also try making ur set up more rigid
@MREV-Solar3 жыл бұрын
Thanks for the tips!
@darryllyrrad48593 жыл бұрын
I use a black artline permanent texta works well with 6 passes on s/s cups
@CJ-js7vx3 жыл бұрын
What if extension cable used under direct sun?
@MREV-Solar3 жыл бұрын
if you roll it out no problem
@diegosahagun29503 жыл бұрын
What kind of bit you used?
@MREV-Solar3 жыл бұрын
D6 50L 4T 63`
@kiwi35803 жыл бұрын
Found feed 600mm/s a bit high, 300-400 seems to work better
@MREV-Solar3 жыл бұрын
thanks will try it
@snowcatxx873 жыл бұрын
One year later, still no scheduling.
@shinchin3843 жыл бұрын
The app is updated these days. The clean at time function appeared finally...
@MREV-Solar3 жыл бұрын
thanks for the info i missed this. yes finally it have a Scheduler unfortunately it is not available for download in the play store for my Country so i had to ask for the APK file
@Jagster7k3 жыл бұрын
Why would you buy two. The Narwal is a sub par vacuum robot.The shark iq with auto empty or any iRobot with a dust bin are far superior, half the price, and are maintenance free for up to a month. This robot is a decent mopping robot because of the minimal maintenance. That’s all.
@MREV-Solar3 жыл бұрын
At that time I bought them for my Knowledge no shark iq was available and on Kickstarter these days I get nearly 2 for the price of 1.
@RobsToys8133 жыл бұрын
Saw this on tik tok
@MREV-Solar3 жыл бұрын
never post it there ??
@RedMi-ne9pq3 жыл бұрын
_มก
@makmak64483 жыл бұрын
จะ_ภ
@AI7KTD3 жыл бұрын
I wonder how it sounded!
@0rbnotacus3 жыл бұрын
What exactly is that oil additive? I'm curious what would be a US equivalent. Thanks.
@MREV-Solar3 жыл бұрын
try hear products.liqui-moly.com/storelocator/
@yinghan24383 жыл бұрын
where are you buy it? can I use it in Canada?
@MREV-Solar3 жыл бұрын
try on the Website i am not sure for Canada narwalrobotics.com/home
@sweettea90353 жыл бұрын
It's in Canada now.
@coalakida3 жыл бұрын
Is there anyway you could brace if from behind and still alow it to move , that for me would be the work around . ??
@tsbrownie3 жыл бұрын
A Thai friend sent me the MEA (Bangkok) rules for grid attached solar. If I understood it correctly one would be lucky to get 7% of the benefit of the system, the MEA would get the other 93%. Any idea why they would so actively discourage solar power when it could be so beneficial to manufacturing and control of import of electricity?
@MREV-Solar3 жыл бұрын
The generator capacity from Thai powerplants is much more higher than the needed. Now private people add solar to reduce the Carbon footprint normal mea & pea not need the additional power in the moment but this may change in some years. As it is was not allowed to produce private power years ago I decided to use the off-grid solution as it is 0-export. It is not cheap to install but the money come back over the years. I think in 30 years I can get the money back 2-3 times. I started in 2015 the solar panels and inverter are paid of already...
@dariosanchez84213 жыл бұрын
Look cheap, sounds loud, and keep going back to the same area. Should have a rotating brush roll for carpets together with side brushes in the front with at least 2000pa motor instead of 1800pa for stronger suction and the spinning mop pads on the back... Doesn't convince me at all!
@MREV-Solar3 жыл бұрын
For my needs is it the perfect solution I am happy with it.
@manop9193 жыл бұрын
Incredibly, I’m interested in your project. I’d like to know the entire price.
@MREV-Solar3 жыл бұрын
A lot but as you use a system like this for at minimum 20 years the money come back at minimum 2x of the investment
@kinglord54293 жыл бұрын
Its size what makes it fail. to large for under low objects or tight spaces something braava 300 series doesn't have
@MREV-Solar3 жыл бұрын
I have no problem with the furniture I have. For me it is ok happy with the robots.
@kinglord54293 жыл бұрын
@@MREV-Solar i have few pieces with very low floor clearance just inches, needed to add rubber foot caps just to raise higher so roomba could fit under. Why will not buy ladir vacumms that dome would prevent that.
@nattanans.73163 жыл бұрын
Sir, Do you lives in Thailand? Where can i buy this robot in Thailand?
This company has horrendous support and lies to it's customers like it's nothing. I've had a defective unusable Narwal for 6 months or so and have been waiting a month for a refund. They keep saying "refund in process now" and "will process refund ASAP" but then they tell me it's going to take a month, even AFTER I've already waited a month. Truly terrible unresponsive support - most of the time they don't respond at all and when they do it's just canned responses that don't help. Spent the 4-5 months of ownership with the Narwal on extremely slow back and forth troubleshooting correspondence all of which failed and they are still giving me the runaround. The product may actually be good but I wouldn't know since I still can't use it. I would definitely not invest in this until they are available at online retailers and have fixed their support issue(s). If yours actually works, count yourself very lucky.
@MREV-Solar3 жыл бұрын
Sorry to here that you have problems with the support of Narwal. Luckily i never hat an big issue with the robot than are working fine for more than a year now. The only problem i had was the software bug at the end of the year and they fix it in a week or so. I suggest that you make a video about your problem and post it online it improve the speed of the service a lot!
@cl34973 жыл бұрын
@@MREV-Solar Thanks for the tip - not sure if it was because of posting comments all over about this or they finally got their act together but I did eventually get the refund they said was coming. Mine is still possibly in the 'year 2021' bug loop and I can't seem to get it working again. I believe I've tried everything and no matter what, it won't re-add to the app. Support gave up and offered a refund instead of troubleshooting further.
@helenrapfogel26413 жыл бұрын
Have you had a problem with the sweeper coming loose from the vacuum
@MREV-Solar3 жыл бұрын
no never
@MarkPicker3 жыл бұрын
Same as @John Fiott said - silicon spray is way cleaner and works well. It was one of the very first things I did to my enclosure. I just sprayed the plastic slider, not the whole channel.
@MREV-Solar3 жыл бұрын
yes you are right i should update the video ...I try it already works fine with silicon too