Stew- Mac

Пікірлер

@mhector89 2 күн бұрын

Holy mack a roni.... Hauling biscuits...😮

@jonahshetterly3515 6 күн бұрын

How did you get the curve on the right to be smooth like that? I’m sorry I don’t think I caught it in the video. Also how does changing the gauge of wire change any of the data you’re showing just out of curiosity? How would amperage or throttle curve or any of that change if let’s say a person went from an ic2 connection to an ic3? Does how much amperage the battery or esc connector can handle affect the data in any way that you’ve shown? I ask all this because I recently put a castle 1010 series motor in my arrma granite grom and it’s the first time in a while I’m giving castle electronics another chance Greetings from Florida, USA!!!!

@StewMac570 5 күн бұрын

@@jonahshetterly3515 there is a setting for the curve to be liner or curve. Curve will make it smooth Changing the thickness of the wire reduces resistance which in turn reduces amps and less voltage sag. Changing just the connectors would have a small impact on amps

@TheMoody876 10 күн бұрын

Just got my cobra 8 ace in the programed throttle settings don't seem to be doing anything even set to 2% for 1 second

@Tassiephotographer 11 күн бұрын

Holy crap man, that destroyed the car 😢 that thing was rocket fast, I’ve never seen an RC car go so,quick before.

@OneKebabPlease 12 күн бұрын

Hey Stew Mac how do you mesh the gear perfectly because I’ve try it not to lose and not to tight just perfect then after a high speed run my spur stripped?

@TheMoody876 15 күн бұрын

Just ordered mine cant wait to get it in and try it out running 3s

@OneKebabPlease 17 күн бұрын

What tp motor is that and the gearing please

@DCPlaya 18 күн бұрын

My friend and i have tt02s and are doing diff builds, hes doing speed, but staying 2s, what would you recommend for it?

@raymondgarcia5535 25 күн бұрын

Has anyone ever gave this motor a couple passes on 4s

@StewMac570 25 күн бұрын

@@raymondgarcia5535 I believe so. And even 5s.

@dadon197922 Ай бұрын

What’s a good spur gear for it

@thecoolnohairguy6103 Ай бұрын

do you run brushed or brushless on those

@StewMac570 Ай бұрын

Brushless

@josephcaruana9165 Ай бұрын

Kindly, I have an xlx2 and don't have all these settings, so I had to use the radio to make some adjustments like you did, but when I left the punch of the esc at 0% which is full power, the esc was stalling on the starting line, so I had to make it to 100% maybe next time I try 50% or something in between! Meanwhile the graph is good and it works. Thanks for shearing

@zoridor16 Ай бұрын

wonderful race do you think this chassis and spur gear and gears will support 2s brushless (28 or 29 mph) for a long time? thanks for sharing😊😊😊

@StewMac570 Ай бұрын

Yes

@ThomasVanTreeck-im7gv 2 ай бұрын

Do you lock your diffs?

@StewMac570 2 ай бұрын

Yes

@Capz24 2 ай бұрын

I can't find any websites that carry low teeth spur gears that are 48p, can you send me some links to some spur gears you recommend.

@Patriotpatriot251 2 ай бұрын

Hello, Steve just wanted to say thank you for everything that you do for us out here. One question is there any way possible that you can help us with some of the tunes on KZbin? Some of us don't have social media like Facebook or Instagram. If you could maybe put something up here. I heard recently you had a cheat sheet up. Any little bit like that could help us out here also. Again appreciate you have a great day

@StewMac570 2 ай бұрын

I post tunes in my site stewmacrc.godaddysites.com/

@TheAnthonyBrandi 2 ай бұрын

where did ya get the heat sinf that wraps around the resistors heatsink?

@josephcaruana9165 2 ай бұрын

Very good, thanks for the info, I always tried to do these adjustments with the xlx2, but I never succeeded that I had to purchase another radio transmitter to make some adjustments. Maybe in the coming future, they will also replace the xlx2 and the Mamba 8s because they are a bit slow when using data logging!

@dirtrider88 2 ай бұрын

its not working for me. the second mine hits the amps its set to it drops back down to 40 watts (what the internal discharge is limited to) and the charger starts heating up. i dont get it. only difference is im discharging a 4s and my power supply is only 10 amps but cant imagine the power supply is limiting what can be discharged through the resistors

@rgreeneish 2 ай бұрын

I got it to work a few years ago, and never got it to work again. Could never get it to work with 4s packs. Not sure why.

@ohioreseller6381 2 ай бұрын

Thank you so much. I have a Sanwa M17 & a cobra 8 ace. my EPA’s were at 108 on throttle and 40 on the break and couldn’t figure out why it wouldn’t calibrate until this video. Thank you. You’re the man!

@RowanHick 2 ай бұрын

Always good at demonstrating things !!

@Gavs_rc_hobbies 2 ай бұрын

I just ordered one of these and had no idea that it has a trans brake function. Looks like I'll be switching my no prep cars over to this radio as well.......

@ayumukai3249 2 ай бұрын

What is the name of the motor you are using?

@StewMac570 2 ай бұрын

In the description

@scaleworksRC 2 ай бұрын

Oh NO!

@dans2423 3 ай бұрын

Would you have a link for that carbon fiber top brace?

@StewMac570 3 ай бұрын

www.fibre-lyte.co.uk/

@manuel39164 3 ай бұрын

Hi Mac can you make more Tune Videos about the Cobra ghost please thx nice day

@nickkoepplinger9204 3 ай бұрын

So how is the power output of this esc? I was thinking about picking one up, but im already running a castle mamba Monster x8s, so would it be an upgrade cause of the software that allows for more timing or a downgrade ?

@StewMac570 3 ай бұрын

Depends on what cell count you are using. The ghost is good for 2 - 4s where the MMX8S is 2 - 8s. If your just running 2s the ghost RC Cobra is and upgrade in-terms of power delivery. Then yes it has 120deg of total timing where the MMX8S is only 45deg. Being a 32bit processor is faster processor than the MMX8S. It also has double the amount of data logging.

@peoplePC-dx2cu 3 ай бұрын

Hello dude，I wonder is that lock the diff is important or not 😮If it's really matter，can I lock the diff with 2000Wcsts diff oil？

@StewMac570 3 ай бұрын

I run 1 mill oil these days

@peoplePC-dx2cu 3 ай бұрын

@@StewMac570 got it ，thanks man

@dirtrider88 3 ай бұрын

7:07 why is it only discharging at about 5 watts???? also, isnt your fan plugged into 12 volts at whatever amps your power supply puts out (which would be way more than your fans can handle)? how does that not fry your fans?

@StewMac570 3 ай бұрын

Amps don’t push, the fan draws the Amps it needs

@dirtrider88 3 ай бұрын

@@StewMac570 but why does it only say it discharging at around 5 amps?

@dirtrider88 2 ай бұрын

@@StewMac570 its not working for me. the second mine hits the amps its set to it drops back down to 40 watts (what the internal discharge is limited to) and the charger starts heating up. i dont get it. only difference is im discharging a 4s and my power supply is only 10 amps but cant imagine the power supply is limiting what can be discharged through the resistors

@SRNT09 3 ай бұрын

I just purchased the T10px, however mine does not have the drag racing option; do you know if I can download it somewhere? - Thank you in advance.

@StewMac570 3 ай бұрын

You need to run the latest update in the radio you can find it here futabausa.com/product-support/software-downloads/

@SRNT09 3 ай бұрын

@@StewMac570 Thank you, Sir!

@Mcbrocker 4 ай бұрын

Which castle link are you using the v3?

@StewMac570 4 ай бұрын

V4.

@Gregorybridgewater 4 ай бұрын

Hello Stew! Question concerning rpm input. When you are setting rpm activation for timing in this new Cobra, do you still need to double the number you want to set it at? Like if i want to set it to activate from 1500 to 30,000, do i need to input 3000 and 60,000?

@StewMac570 4 ай бұрын

Hey Greg! If running a 4 pole yes.

@Gregorybridgewater 4 ай бұрын

@@StewMac570 ok. That's what I was thinking, like the old Ghost

@StewMac570 4 ай бұрын

@@Gregorybridgewater yeah it all works in electrical RPM. Because the 4 pole has twice as many poles per revolution the rpm reads double.

@manuel39164 4 ай бұрын

Asome Video i hope i get my esc nice eastern from Europa Austria

@edwardgrant9758 4 ай бұрын

Another great video StewMac 👻, as I wait on weather to clear out here I just been watching your vids and reading through the Ghost Rc page trying to learn, and it seems to me the program throttle will be great way of tuning. Q. When I run (program throttle) should the (Throttle curve) be liner?

@StewMac570 4 ай бұрын

Yes the throttle curve is ignored when using program throttle so no need to touch it

@feverexplosion1968 4 ай бұрын

what motor

@StewMac570 4 ай бұрын

5700 kv brushless

@feverexplosion1968 4 ай бұрын

@@StewMac570 what brand and where did you get it. What esc and stuff like that?

@StewMac570 4 ай бұрын

@@feverexplosion1968 goolrc off eBay for the motor, trackstar 1/8 esc from hobbyking and 3s battery from hobbyking.

@feverexplosion1968 4 ай бұрын

what motor is this

@edwardgrant2717 4 ай бұрын

StewMac I watch all of your vids always great info, I’m wondering on program throttle do you just put Futaba on 1 stage 100%??

@StewMac570 4 ай бұрын

For programmed throttle yeah you just use a normal throttle. Just use the single speed and set it to 100%. In the esc I would set the activation to 30% throttle so it will give you 30% worth of throttle to drive the car back on.

@edwardgrant2717 4 ай бұрын

@@StewMac570 thank you I’m working in the program menu with your vid playing watched like 50 times already lol got stuff💯

@markyoung6615 4 ай бұрын

Hi, looking to make one of these, what do you use to stick the fans to the resistors, thanks.

@StewMac570 4 ай бұрын

Some thermal paste and they are held on with bolts.

@manuel39164 4 ай бұрын

Asome thanks for this Video you are the onley one the make this for us this day i order my cobra ghost ace nice day from Europa Austria

@manuel39164 4 ай бұрын

Asome can iuse the normal Cobra castle for real street Racing no prep tires nice day

@mitchellminer4596 4 ай бұрын

Awesome!👌👍👍

@manuel39164 4 ай бұрын

Can i use the Normal Cobra for Real Street Racing on a not preped track nice day

@StewMac570 4 ай бұрын

The normal cobra does not have any of the drag functions and limited on timing.

@manuel39164 4 ай бұрын

@@StewMac570ok thanks the Ghost Ace cobra is Sold out ervery day

@manuel39164 4 ай бұрын

Asome thanks good Video

@rcguss 4 ай бұрын

good to see the car is hauling!

@theetonster 4 ай бұрын

Nice job Stew!

@manuel39164 4 ай бұрын

Please more test Videos about the esc

@bigboihobbys4870 4 ай бұрын

Ahhhh man that's so shit to see but fast nice set up man

@RMinYLYTRSS 4 ай бұрын

the adjustable top arm (front and rear) are not that useful. the camber angle is not to the end point of the suspension, because the suspension arm of TT02 are much shorter than type S. the suspension arm of type S almost reaches the centre of the wheel, change the camber angle from type S's TRF arm does change the wheel camber angle. for TT02 change the angle of chamber jsut change the angle of tilting, the point you changed is far away from the centre of the wheel.

@CT-pc3rh 4 ай бұрын

Have you tried there new 7700 kv Ghost motor

@StewMac570 4 ай бұрын

Yes I have been using it for ages now. Also running the new ghost esc too.

@CT-pc3rh 4 ай бұрын

@@StewMac570 so do you think it's faster than the 6400 castle drag motor

@StewMac570 4 ай бұрын

@@CT-pc3rh yes

@dans2423 5 ай бұрын

Nice body! And impressive speed, of course.

Ең жақсы KZbin

Пікірлер