@@mikeheck8350 we didn’t- a new gland wasn’t an option from the manufacturer. We got a quote to have a machine shop make one that was almost as much as a new cylinder 🤪 The customer decided to just scrap the cylinder because it was a spare 🤷🏻♀️
@mikeheck83505 күн бұрын
@carolinahydraulichose6253 that'd what my mind went to but I had to hear you out!
@southernhomesteadtransformatio5 күн бұрын
Merry Christmas Jackie 🎅
@carolinahydraulichose62535 күн бұрын
Same to you and Wendy!!
@southernhomesteadtransformatio5 күн бұрын
@carolinahydraulichose6253 Thank you 😊
@timfolgers27598 күн бұрын
Thats awesome.
@jamesstroud80188 күн бұрын
Merry Christmas to you too! 😊
@timfolgers275914 күн бұрын
Dealing with trying to rig up a gauge to a machine with DIN light fittings, such a pain finding adapters for it.
@carolinahydraulichose625314 күн бұрын
@@timfolgers2759 DIN is the worst- are you trying to do it with a local company or buying the stuff online?
@timfolgers275914 күн бұрын
Love your videos, such a great explanation!
@carolinahydraulichose625314 күн бұрын
@@timfolgers2759 thank you!!!
@jackmarsh7328Ай бұрын
What that adapter name
@carolinahydraulichose6253Ай бұрын
@@jackmarsh7328 hey! I bought it from jeggs- part number 100706. It was 18 MM X 6 AN (JIC)
@jackmarsh7328Ай бұрын
@carolinahydraulichose6253 thanks brother.
@wheeliebad11B2 ай бұрын
Figured this out too late now it's stuck!
@carolinahydraulichose6253Ай бұрын
@@wheeliebad11B sorry to hear that! Junk Comes from Britain! 😒
@ROHISRAHAMAN_8162 ай бұрын
Hamko ak metar chaiye
@ele48532 ай бұрын
My John Deere 328D has the same stupid design on the boom hydraulic cylinder. I never seen such s stupid way to design hydraulic cylinders. It’s a nightmare to remove and assemble back on without damaging the seals on the rod piston.
@carolinahydraulichose62532 ай бұрын
I sometimes think John Deere hates their customers 😆
@ele48532 ай бұрын
@@carolinahydraulichose6253 what they don't realize is that slowly by slowly "customers" go away and they are the ones loosing it. In fact after fixing my tractor I will sell it. Enough is enough....
@MarySanchez-q3c3 ай бұрын
Nina Plains
@BryanRose-z1i3 ай бұрын
Great video.
@OWASIA3 ай бұрын
Wonderful style of explanation The presenter has a strong pitch sound🎉
@kentuckytrapper7804 ай бұрын
Big help! Thanks
@andrewarmstrong91944 ай бұрын
I wish I would have watched this before I had to cut the eye off to reseal mine 😞
@carolinahydraulichose6253Ай бұрын
@@andrewarmstrong9194 better than having to cut the piston off and buy a new one!
@Shawn-vt6jv4 ай бұрын
I was expecting 1 ball bearing and 1 bar. When I tipped it upside down, I got 1 larger ball bearing and 3 smaller ball bearings. I also got 2 flat bars and 1 with a bend in it. I wasn’t expecting it, so not sure which hole they came out of. Can you help?
@carolinahydraulichose62534 ай бұрын
@@Shawn-vt6jv hey! I have only ever seen one ball bearing, so I cannot tell you where the other ones go. I would say try to get a breakdown on it from the manufacturer of the motor. They should be able to tell you where everything goes.
@Blsmafya4 ай бұрын
They are playing the music in the background so you don't hear the mechanic swearing at the top of his lungs!!🤪
@carolinahydraulichose62534 ай бұрын
@@Blsmafya 💯
@carolinahydraulichose62534 ай бұрын
When we are disassembling it, we use an orange ring that John Deere includes in the rebuild kit if you buy it from them but you can buy them individually online if you know what size you need.
@billbray59954 ай бұрын
What is the clamp that was used to compress the compression ring. Just found your channel
@Aaron-hype5 ай бұрын
Ok there's your expanders. Where's the rings?
@carolinahydraulichose62535 ай бұрын
Those particular piston seals were U-seals facing opposite each other, so that's all there wa to it :)
@stevecovington98175 ай бұрын
I can guarantee you they don't always come out by turn the gland nut for go back by turning the gland nut , I just did my sixth one today and they have all been a pain. Pull them out carefully Lee with visegrips and use visegrips and a good hammer to put them back in with lub and patience
@carolinahydraulichose62535 ай бұрын
you're not wrong, but who wants to watch a two hour video of us struggling? lol
@rickpaine3865 ай бұрын
Just rebuilt 2 of these cylinders and the wire wouldn't move but I had enough to clamp on some vise grips and tap them out with a small hammer
@freespirit24556 ай бұрын
Do you have the part number for the seal kit? I have the same machine/cylinder as in this video (and have learned that they aren't all the same for LB75Bs). Also, in other videos they talked about changing the seals on the piston head, but you say in this video that they aren't replaceable? If I can't find a kit I'll have to look for random seals that fit, and I want to be sure if I should try to take the piston head seals off or not....Thanks!
@carolinahydraulichose62536 ай бұрын
Hey! If you can measure the rod and piston, I can give you better info on the seals. I believe this one was 40 x 80- is that what yours is? As far as the piston seals- I’m not sure what I said in the video, but it’s the black pieces you can’t replace. You can remove and replace the yellow piston seal in the middle- it’s a two piece piston seal….. let me know if your rod is 40 MM and your piston 80 MM and I should be able to help you out
@timtrial39717 ай бұрын
Good video. I love using my thread gauge. It's a way to impress your friends
@kursahdfa75287 ай бұрын
God is coming back soon pls all repent of your sins
@bsrob18 ай бұрын
Do you make custom lines and mail them? I’d love to have one made to skip the adapters
@carolinahydraulichose62538 ай бұрын
Kinda- there are a lot of it of questions I need to ask to make sure you’re getting the correct threads and everything…..
@bsrob18 ай бұрын
@@carolinahydraulichose6253 that’s awesome. Can I search y’all on the web or do u have a phone number?
@942doc18 ай бұрын
phenomenal video. very informative. good to know that kubotas use bsp
@carolinahydraulichose62538 ай бұрын
Thank you for watching!!
@RPMMania828 ай бұрын
What do you do if the lockwire breaks inside while spinning it out.
@carolinahydraulichose62538 ай бұрын
Get something skinny to try and jam under the piece left in it. Then turn it so the wire (hopefully) turns up and out of the groove
@RPMMania828 ай бұрын
@@carolinahydraulichose6253 I'll try. Thanks. It broke before it ever started to move.
@kuleshwartandan40679 ай бұрын
Piston seal me u rod seal bhi chadha sakte hai kya
@carolinahydraulichose62539 ай бұрын
This piston took U Seals, but you’re right that type of seal usually goes in a gland
@robbie79nz810 ай бұрын
Is it only with swivel type fittings that you can seal through the cone faces? Is there such a thing as a port connection that seals with the cone faces?
@carolinahydraulichose625310 ай бұрын
If the port has the swivel on it with the cone, yes, but otherwise it seals with the bonded seal.
@guiltspeedsupra203610 ай бұрын
Hi few days ago I replaced my hydraulic pump. upon turning on hydraulic tank I notice oil flowing out the quick connector while it was unattached to dump trailer. Is this normal ? I’m also having some Cavitation as my pump is winding both on idle and throttle up.
@carolinahydraulichose625310 ай бұрын
Oil coming out of the quick coupling when it is not connected is not normal- how much came out? Make sure your tank still has enough oil in it to feed your pump.
@guiltspeedsupra203610 ай бұрын
@@carolinahydraulichose6253 not a lot but I added 15 gallon since no leaks anywhere and still got this problem
@dakotak843710 ай бұрын
Looks still good to me
@carolinahydraulichose625310 ай бұрын
lol right?! Couple more years at least 😂😂
@dakotak843710 ай бұрын
@@carolinahydraulichose6253 or at least the new owner lol
@jeremyjohnson977811 ай бұрын
hey hi at 00:05-07 that is NOT an FJ (Female JIC). The threads are far too close and the cone is steeper than a 37º angle. It's more likely an FK (Komatsu)
@carolinahydraulichose625311 ай бұрын
Lol I promise it’s a JIC- it was a #32 though, so maybe that’s why it looked so steep in the video ☺️ There is an “FK” in there at 45 ish seconds- the 30 degree flare. Thank you for watching!!!
@philliphall5198 Жыл бұрын
Thank You 🙏 😊😊😊 Easy job
@philliphall5198 Жыл бұрын
I’ve even heated them to free up the wire and let them soak in diesel several days before I could finally get it out Hate these types the most
@carolinahydraulichose6253 Жыл бұрын
It is a pretty terrible design! Letting them soak is always a good idea!!
@emmanicole7695 Жыл бұрын
How does the groove become damaged?
@carolinahydraulichose6253 Жыл бұрын
Great question! This was off of a brand new machine, so I think the person who installed the hose over tightened it and squished the groove
@jacubcalhoun7192 Жыл бұрын
Y'all made it look easy I used a chain and connected it to the 2 bolts and washers and used the power of the ram to remove it..mine was being a puto!!
@carolinahydraulichose6253 Жыл бұрын
Lmao where there’s a will there’s a way!!
@jacubcalhoun7192 Жыл бұрын
@@carolinahydraulichose6253 yep tht and my old ass uncle HAD TOO help!🤦
@robertromberger4708 Жыл бұрын
Problems getting good engagement with a "phillips" head screw on your Nissan? Go buy a proper JIS screwdriver.
@carolinahydraulichose6253 Жыл бұрын
Yes! Just had some guy telling me about those the other day!! He said a Phillips will strip it out the JIS Ones. So annoying!
@emmanicole7695 Жыл бұрын
THEY HAVE TWO THREADS 🤯
@carolinahydraulichose6253 Жыл бұрын
It’s SO crazy 🫠
@DannyHarris-o5g Жыл бұрын
No video
@partsisparts9568 Жыл бұрын
Thanks for Posting. I have to rebuild the cylinders on my Weaver AFH-70-A and had no idea how the wire was removed. It's a silly design.....
@carolinahydraulichose6253 Жыл бұрын
It’s a terrible design! When you put the wire back in, pack the groove with some silicone to stop water from going in and rust from building up 😀
@partsisparts9568 Жыл бұрын
Good idea
@emmanicole7695 Жыл бұрын
what’s a quad ring?
@carolinahydraulichose6253 Жыл бұрын
So glad you asked!! It’s a rubber ring that is square instead of round, like an o ring is
@Nick-z1o Жыл бұрын
No
@carolinahydraulichose6253 Жыл бұрын
Yes
@pablofierro4981 Жыл бұрын
Donde se pueden comprar
@carolinahydraulichose6253 Жыл бұрын
Hopefully you have a local hydraulic shop that can sell them to you- and if not maybe Amazon?
@pablofierro4981 Жыл бұрын
@@carolinahydraulichose6253 gracias
@jorgenri47 Жыл бұрын
Hola buen dia
@litoRX7 Жыл бұрын
They’ll fit, if you use the right tool! 🔨 😂
@carolinahydraulichose6253 Жыл бұрын
😂😂😂
@abduljabar4846 Жыл бұрын
Can bspp fitting with bspt??
@carolinahydraulichose6253 Жыл бұрын
No, unfortunately
@abduljabar4846 Жыл бұрын
@@carolinahydraulichose6253 tq fr yr answer
@herbertjuliette762 Жыл бұрын
🙂 Promo-SM
@chrisandmonicazantingh990 Жыл бұрын
I’ve got a Massey cylinder with the same ring set up. Got it off but can’t get back on matter what I try. Might leave it off
@carolinahydraulichose6253 Жыл бұрын
Let me know if it works! I’ve always wondered…..
@chrisandmonicazantingh990 Жыл бұрын
It’s working with the in cab controls. If you use the the fender controls it lifts too high and leaks. Be better if it was on.
@carolinahydraulichose6253 Жыл бұрын
@@chrisandmonicazantingh990 thanks for letting me know!!