Hi @truefreedom8269, yes it works. For further information you can contact us at: [email protected]

Please send me a replacement kit that fits in my Focus Jam 2 8.6 Bosch CX without modifications to the cooler. The current sensor is too large and doesn't fit in the motor area despite multiple attempts. During my last attempt to adjust the cooler, the sensor was damaged. Is it possible to get a version without the base plate? Otherwise, I’ll also contact support directly.

Hi @sandraalemanaleman8874 , For technical problems you can open a support ticket on our site

Me to i don't recommend doing it on smart system I got error

Good morning, for any problem you can open a support ticket

Bonjour @RolandDupasquier-j6s, oui, c'est compatible. Pour plus d'informations vous pouvez nous contacter à [email protected]

yes, that is!

Hi, for further information you can contact us at: [email protected]

Hi, for technical problems you can open a ticket on our site

@sacredtjiss problem schon gelöst ? , meiner ist auch gerade angekommen aber noch nicht eingebaut 😬

@@Alex.9.97 so wie es aussieht, lag es an der falschen Firmware des Motors. Ich konnte es nach dem Update nur kurz testen, aber es scheint zu funktionieren 🙂

@@sacredtjiss any updates ? :) is all working well ?

Post video for the update pls

Hi, for more information you can contact us at [email protected]

Buongiorno @SilvioFinazzi, no, non abbiamo un tutorial specifico per Scott Patron. Per quanto riguarda l'installazione del kit però può tranquillamente seguire questo video tutorial o le istruzioni del nostro manuale (link nella descrizione del video) , le uniche differenze saranno nello smontaggio del motore, che in questo caso è differente da telaio a telaio.

Hi @tenemax7849 , at the moment The Eplus chip unlocks the speed up to 50 km/h

@@eplustuningspecialists perfect!

@@eplustuningspecialists Sounds like asking for problems, such models will cause problems if you will drive long periods over 35km/h

Hi @user-wq4ke5qo8m, yes it is compatible

@@eplustuningspecialists , Thank You :)

Ciao @MotivationNation1863 , per info contattaci a [email protected]

Salut, oui c'est compatible. Pour plus d'informations, vous pouvez nous contacter à [email protected]

Hi @lolxd7150 , the Eplus Mini kit will unlock the speed up to 50 km/h while the Eplus Advanced kit will unlock the speed up to 75 km/h (theoretical). You can find all the specifications of our products on our website www.eplus.bike or write us an email at [email protected]

Hi @mycallhill , You can contact us at [email protected]: we will be glad to provide you with the details of our Flash authorized dealers in London.

Hi @mycallhill , tampering actions as moving the sensor can cause errors. The unlocking with the Eplus Flash Software is safe, not detectable by the diagnostic system and reversible: once the bike is unlocked with Flash, you can switch back to the factory settings and unlock the bike again as many times as you want for free. You can enter a maximum theoretical value of 75 km\h: we suggest entering a value between 35 and 40 km\h to prevent overheat, wear of the mechanical parts and save battery life. Once purchased the Flash software, our specialists are at your disposal for any technical support.

Bikes in different parts of the world come with various different speed limits due to local legislation, hardware is the same in all cases. What's being done here isn't causing the system to operate outside of it's specification, it's just removing the limit set by local regulations.

Hi @RaulKivine , yes you can still install the Eplus kit

@@eplustuningspecialists to u have some links to instructions To I understand right…first u connect eplus speed unluckr then u link bosch cm and back to the engine

and one more question...does it works with ABS brake system....i have grand canyon on 9

Hi @dani-wg2lu, yes. For more information you can send an email to [email protected]

Hi @JRCondat , you can send us an email to [email protected] and we will tell you the dealer closest to you

Buongiorno @adamopiccolo1710 , no, lo sblocco tramite Eplus Flash non è compatibile con la sua bicicletta. Le consigliamo l'installazione di un kit fisico nel carter motore. Per maggiori informazioni può verificare il nostro sito www.eplus.bike oppure inviarci una mail a [email protected]

Buongiorno @egidioztto8424 , lo sblocco tramite Software Eplus Flash è sempre attivo. Per poter attivare / disattivare lo sblocco deve installare un kit fisico nel carter motore. Per maggiori informazioni ci può contattare a [email protected]

Hi @iuriialeksandrov2708, yes it is compatible. For more information you can contact us at [email protected]

Hi @SzypkiAndrzej , with Eplus Flash we have never had any errors

jestes w stanie pomoc z odblokowaniem shimano ep8?

@@chrisscott2151 Hi, if you need assistance you can open a support ticket on our website www.eplus.bike and one of our technicians will help you

they say ep801 not compatible and wont sell it. and said version 2.2 was last update that worked.

Hi @VR6NAVYVW , we have never had this problem

Hi @johnwinford3138 , The Flash is currently compatible with firmware version 4.2.2 of EP801: this version is needed in order to unlock the bike with Flash yourself. Compatibility with version 4.3.0 will be available as soon as possible: you can check compatibility on out website. At the moment, we are available to unlock motors with firmware version 4.3.0 remotely via online sessions.

Hi @Jakub-cs7tz, no it doesn't work on Dyname 4.0

Ok, not for me than.

Good morning @trevorhenson759 , the Flash software is not yet compatible with version 4.3.0. As soon as it is, we will announce it on our website / instagram / Facebook

Bonjour @astaukor , oui, c'est compatible

Hi @naya92, 1. If i buy it do you send me the software by e-mail ? Yes 2. How long to receive it? Within 2 working days at most 3. How many time/ how long i can use it? You can carry out as many further modifications as you want on the same bike for free 3. Is it possible to go back to the original version ? Yes 4. After the modification, is the speed displayed the correct one? Yes

Hi @magicsork657 , no, it's not possible. In these cases it is necessary to connect directly to the engine and also disconnect the battery.

Bonjour, j'ai également un orbea Kemen avec le même problème la connectique n'est pas accessible sans enlever le moteur. Comment avez vous fait ? Merci à vous.

Comment avez vous fait ? Démonté le moteur ? J'ai le même problème avec un orbea kemen. Merci

Hi @michaelkrempler6303 , for info contact us at [email protected]

Hi @AHappyZeebra , to unlock the Ride60 engines we have a chip equipped with connectors to be installed in the engine crankcase. You can find it on our website www.eplus.bike

@@eplustuningspecialists given the software is open source I’d like to see Dev develop a software solution.

Hi @draketalon, yes it still works. simply disconnect the battery connector from the engine when installing the kit

Can we get answer for this one?

Hi, all the settings installed by the Flash software are reversible: you can switch back to the original setting whenever you want without leaving any trace. Afterwards, you can unlock the same motor again as many times as you want for free.

Hello, @weenan If you have the small connector on the SM - PCE02 cable you don't need the adapter. Yes, there are differences between the manual and the video because we are working on a new version, but as you can see in the description there are the same instructions. For any questions you can open a ticket on our website

@@eplustuningspecialists Thank you for replying. If I have any further questions I will email you.