toemas8

Пікірлер

@johnfisher8352 3 ай бұрын

Had mine for at least 5 years. Starts first pull every time. Heaps of power. The best mower I`ve ever owned. Previous mower was a 4 stroke Victa that cost me over $400 10years ago. Absolute piece of rubbish.

@rafastarczewski3565 3 ай бұрын

Will a 120mm beam fit under the feed to make an indentation in it?

@DanielSmedegaardBuus Сағат бұрын

It can cut up to 305 mm, and there's an adjustable stopping screw that can be used to set the cutting depth, so you can make indentations like that. I haven't bought mine yet, still looking for reviews, so I've only seen this in other videos, and have no experience of my own doing it.

@Dave-ht7dx 4 ай бұрын

Motor at top, noise and vibrations are closer to operator's ears.

@chester72ccm 6 ай бұрын

Thanks

@NathanMcClintock 6 ай бұрын

Thanks for the vid. Does the blade stop more or less immediately when you remove your finger from the trigger?

@adamr5347 Ай бұрын

Dunno if you still need this information, but no, the blade carries on for a while.

@gibbyau 6 ай бұрын

that how it cut pine lolo

@atpfitness1 7 ай бұрын

Ive had mine for about 7-8 years now and had no issues. Have you come to the stage of either sharpening or replacing the blades? My 2 local mower stores wont sharpen Ryobi blades so wondering if you sharpened them yourself or purchased the replacement blades?

@selatom669 8 ай бұрын

Thank you for the information. I'm looking at purchasing one from Mitre 10

@blaksin 10 ай бұрын

I just got a 2nd hand girl today. Fuck me dead shes a fatty; good bloody arm an leg workout on the hills an nooks. Just wondering if I can transplant this over to a decent body like a Masport? Shes loud an shes strong. Neighbours got a fright when I sparked this bad lassy up. Def need the ol ear muffs. Any ideas on how to make it catch grass better?; bloody thing leaves shit everywhere; not to mention she pisses grass dust out those green vents - fuck me they need a filter themselves

@aminavillalba103 Жыл бұрын

How can adjust my black and decker miter compound miter saw it’s not cutting straight😢

@haansworsie Жыл бұрын

Can you lock it at any angle?

@DanielSmedegaardBuus Сағат бұрын

Yes, the audible stops you can see in the video are just there to help getting to those most-used angles quickly. You can lock it at any angle between 0 and 45 degrees.

@tims5973 Жыл бұрын

I live in America and would like to buy one of these tools. How can I do that

@charleydavidson2590 Жыл бұрын

Is it still going?

@toemas8 Жыл бұрын

Still going strong 4 years on!

@MariAmmaSar Жыл бұрын

We've got the same mower for about 6years now - just did an oil change - was easier done than I thought it would be. No complaints so far. Pull start works in one or 2 pulls.

@andrewmckay5103 Жыл бұрын

My starts well.. Engine is good. It just can't catch grass to save itself.. Not good for damper tasmanian weather.. I would never buy another one..

@tassieman9293 2 жыл бұрын

mine is a Yamaha engine interesting

@charleydavidson2590 Жыл бұрын

I've seen a lot of negative reviews on the Yamaha one. Can I get you personal thoughts on it? Cheers

@markmitchell450 2 жыл бұрын

Best of luck Engine's fine but the rest of its junk Mines cut 500sq metres of flat grass less than 20 times and theres issues The paint coatings flaking off badly the centre folding handle joint is very poorly designed mines already loose and mine's loose and ive had to try reshape it but ill probably need to weld it solid The deck and bag shoot clogs very easy plus the foam handle is already falling apart

@toemas8 2 жыл бұрын

Yeah it’s coming up to three years still going strong. I actually hit it with the water blaster and was amazed at how good it looks pretty good, below and above the deck no rust. I do agree the handle isn’t great … the foam started to come apart after year 2 . If the grass is wet it does tend to clog up especially when the catcher is almost full. I have been lucky I guess…

@muzzammildeen901 2 жыл бұрын

Really helped out.. thanks!

@gbwildlifeuk8269 2 жыл бұрын

Might have been a good idea to let people know what MODEL the saw is! 🤦‍♂️

@toemas8 2 жыл бұрын

Hi there good point, however there is only one model, at least in the Australasian market, but if it helps its the: BES710-XE.

@gbwildlifeuk8269 2 жыл бұрын

@@toemas8 not all viewers are in the Australasian market and most manufacturers distribute world wide. The rest of the information regarding this will be in the instruction book!

@toemas8 2 жыл бұрын

@@gbwildlifeuk8269 thanks for the tip.

@bob6168able 2 жыл бұрын

Hi. Thank You so much for the video. Would you please make a video showing how this tool is connected to the vacuum. Or would you explain how this is done in reply to my comment

@robheathcote8561 2 жыл бұрын

hahaha, i brought one of these saws todat from mega, just to cut pallets for firewood lol

@LiftEnthusiast2020OFFTOPIC 2 жыл бұрын

We used to have a Flymo

@totsmini3105 2 жыл бұрын

Can you tell us if you also used a hammer-frill bit?

@totsmini3105 2 жыл бұрын

the volume was low - But Thanks for the review!! - I found this item at Bunnings!! - good to see someone using it - Terrific!!

@greggregson9687 2 жыл бұрын

There seem to be a number of drill brands out there with standard 500W hammer drills. Probably all have the same motor. I still have my first hammer drill from almost 20 years ago, and it looks so similar to this one, except a bit cheaper looking (the markings for forward and reverse are literally scrawled into the plastic on either side, freehand, I kid you not, straight from the factory). It is a "Revolution" 500w Chinese hammer drill, and surprise surprise, the thing is still going strong. Yeah, you can't pick em. It has done an absolute tonne of work, all round my house, and outside too. Even doubles as my paint mixer. Remember that name guys, Revolution, tools that go round and round. $10 from Big W back in the day lol.

@holdenbrougham7768 2 жыл бұрын

Good demo video ,, pitty sound seemed to be screaming engine or in fast forward ,, mower sucks up leaves real good , lawn left like green carpet ,, nice

@musc258 2 жыл бұрын

Im gunna pick one of these up tomorrow any more thoughts on it?

@danielmckelvey8273 2 жыл бұрын

Awesome, just bought mine from mitre 10 mega yesterday, got a few projects to do around the house

@toemas8 2 жыл бұрын

Yeah it’s pretty good I can’t believe I held off getting a compound mitre saw… saves so much time and pain with the skillsaw. 👍🏻

@mahmoudelkaddour4304 3 жыл бұрын

I used it it was great no problem,I got a sutton masonry bit,and it drill through the cemented hole then brick hole easily.a total of 90mm deep × 4 holes .love it

@mahmoudelkaddour4304 3 жыл бұрын

I got it today haven't used it yet i need to drill through 80mm masonry wall

@FreeJackZeroGravity 3 жыл бұрын

*I bought two of these to double-team a 2/3 acre plot with my friend.🚜 **allabout.wiki/Ryobi-13** We used to use a mowing service, but $140/month was adding up fast. We needed lawn equipment, and rather than spend $1200 on a cheap ridable mower, we spent the same amount with GreenWorks on two of these mowers, four 2AH batteries, two rechargers, a blower and a trimmer. I'm glad I did. These mowers are easy to push, plow through thick grass, can be used at night due to their low noise, are effortless to start, don't stink of gas, and I love always having a charged battery available. I've found that a battery can fully charge before I drain a battery (~45 minutes), so the two of us never have to stop. We get our yard done in about 1.5 hours and hardly break a sweat. We have been mowing weekly and actually enjoy doing it, despite the two of us claiming we hated mowing grass. Seems we only disliked the inconveniences that gas-powered equipment bring. Thank you GreenWorks for making lawn care fun for us.*

@leepoole9463 3 жыл бұрын

Can you use it for removing tiles???

@thankforsharingable 3 жыл бұрын

get what u paid

@gold4leaf 3 жыл бұрын

had to return mine after 4 week, the head assembly would move and contact/power was lost unless the whole tool was slightly twisted, Bunnings Aust replaced with no issues, but I notice the new machine also has the same but only slight movemnt in the head, so something to be wary off and not apply to much pressure to your work piece when using the tool, otherwise a great tool, Cheers Garry

@toemas8 3 жыл бұрын

I had an issue with the power switch, Bunnings are great though with the warranty.

@dirtbikeadventures747 3 жыл бұрын

I own that same Ryobi Line Trimmer. So far, i thinks that it's a beast

@toemas8 3 жыл бұрын

Yeah for sure, soo much better than the old corded line trimmer. I still think it’s a bit awkward to hold, being so straight.

@krakadylius1 3 жыл бұрын

Hi. Where did you get dust extractor from??

@toemas8 3 жыл бұрын

Hi I just used an old vacuum. You can get cheap ones from Ryobi.

@MidnightPodcast 3 жыл бұрын

Would it drill a little through brick? Or did I just waste 50 dollars to get a wireless one that's the exact same LMAO !

@toemas8 3 жыл бұрын

It would drill through masonry, depends on the hole size and depth... it Would certainly outclass a $50 cordless.

@jossand445566 3 жыл бұрын

In action !

@ervinlutz8886 3 жыл бұрын

For safety reasons, always remove the battery from the tool when changing the cutting attachment

@toemas8 3 жыл бұрын

Yeah probably good practice on most tools. The way multitools work it’s pretty difficult to cut yourself, not impossible.

@youtubaholic 3 жыл бұрын

This is super helpful. Thanks! Bunnings at Mt roskill is selling this today for 29. Still a steal and good for basic use I reckon. Cheers!

@zamoras4617 4 жыл бұрын

What is the model number on that pole trimmer

@toemas8 4 жыл бұрын

RHT1850SLi20 ... is the model number.

@buffomarinus17 4 жыл бұрын

No hedges were harmed in the making of this video.....

@touristercat3369 4 жыл бұрын

lol

@toemas8 4 жыл бұрын

Too true sorry about that... crap fist effort... i admit that. The hedges are doing a lot better than my camera work.

@avicennitegh1377 4 жыл бұрын

it's as if the Flymo is a flying line trimmer/weed eater. But I like it because it's light, omni-directional and suits an intuitive type like me who doesn't mind flying grass. Petrol mowers are beasts but I just can't handle them. Good to know about the spacers too. Thanks man

@toemas8 4 жыл бұрын

Avicennite GH I agree it’s in between a full sized mower and a line trimmer. If you have areas with level changes or weird pockets it’s great!

@avicennitegh1377 4 жыл бұрын

@@toemas8 true! I ordered one weeks ago and put it together just tonight. It was terrific with the the almost-too-long grass and all the dips in the yard. If I was "built" the other would be good too, but I can see this one doing the job just fine :)