Nice, thank you.

Anyone know a transparent shell for psp go?

Thought i might have had a faulty battery turns out some how it got knocked loose and i just needed to re adjust it so the battery was touching the connectors 😂

Thank you !!!!

I checked your store, but I dont see screens for the Vita 2000 listed on it. Do you have a recommended seller that I might be able to use for one?

How does the replacement psp go screen on your website compare to the oem screen?

I have psp 3000, a problem is i switch to a new battery cause my old one run out of battery so fast. The problem start after putting the new battery on it won't charge properly sure theres an orange light that means charging but it turn off after a min of so besides i cant charge it without the battery so any recommendations on fixed?

Thank you! I followed your video and managed to succesfully changed my shell.

I bought a psp 3000 from mercari Japan and they said it was a new battery and it was tested to make sure it worked.. I got it and the charging doesn’t even work with the battery or no battery… I even tried usb. Should I buy a new charger and battery or what should I do? I’m pretty sad since this is my first time buying a psp and it’s not even working 😕

Is the quality of the screen the same or you can notice the pixel not that great?

hello friend I would like to ask I have the psp street and when I go to open it the sound comes from the speaker but the screen does not turn on.

thank you

Is the supercapacitor the same as the psp 2000?

This is a great video showing how to replace the shell and screen together. I bought a used psp go on ebay and when I got it the back of the shell was gross and the screen had a big scratch on it. Bought the replacement shell and a replacement screen. My only critique is you forgot to put the black film and the wireless button holder on the backplate at the end. Realistically you don't need it for functionality anyway. I like how you suggested using the original buttons and switches. At first glance you don't notice but after closer inspection you can tell the quality of ones in the kit are quite worse than the originals. I installed a new red shell and kept the old white buttons and it looks sick. I think the worse button is the ps home button. I originally put the one that came with the kit on and then decided to put the original on because it fits way better.

You're the only one who mentioned this. I owe you my life 💏💏💏💏💏💏💏💏💏💏💏💏💏

Actual lifesaver oh my god thank you

Okay so my little tab is broken. The one that you lift up and down to put the ribbon back. Is that bad? the cables still goes inside just fine and it’s snug. But touchpad doesn’t work.

thanks, the way you did it, worked perfectly for my psp

Does this work for a red shell?

Is it possible to only replace the outline of the screen ?

thank you for this, made me realize what i did wrong

i like these bootleg shells, it's a clever way to show it's not genuine, cuz it's a color it was never in, so it's not fooling anybody on that front, and it gives an older handheld that was only ever in 2 colors some new flavors! And it looks like they're damn nice looking as well, logos and everything.

What i did with mine was keep pressing the memory card in the slot about ten zillion times and it improved. After a while it stops reading again but now i only need to remove and replace the card about once. Maybe as time goes by doing this itd become completely normal. Maybe it gets cleaned

Just came here to say that I purchased from your shop and was extremely satisfied! Love my PSP Go, was a dream deferred as a child and I love it. Thank you!

For anyone wondering what the specific cell is, its a Panasonic EECENOF204J2 3.3V 0.2F Super capacitor. Its really hard to come by, BUT the EECENOF204J1 works as well and that is what I used to replace mine on my PSP 3000.

Do you think this kind of glass lens could work for psp street (e1004) model? Thanks!

Thanks man, instead of oil I used some WD-40, works like a charm 💪

Can i ask something? I have a PSP 1000 faceplate with the clear lens. And i want to swap my PSP 1000 lens to my new PSP 3000, is it possible if i just pop the lens of the 1000 and glued it again to my 3000?? Thank You So Muchh

You hold the music button and it mutes the audio

Thanks so much for this! - it made it so easy to do the replacement - appreciated! ... I now have a cool blue PSVita with a black screen - what a difference - instead of a blue PSVita with a scratch on the screen. Yay!

Nobody has asked or answered this question: Is it okay to just leave it screeching if you don't mind the noise? I want to know if the noise will actually lead to any kind of damage or stop functioning if you never put any oil on it. Will the system eventually stop reading discs if this problem is left unfixed?

Hi, I recently got a new PSP 3000 and it takes a long time to read UMDs compared to my other PSP. I noticed that if I press the back door, it will eventually read faster. I already tried to bend the metal bracket a little bit, but it did not help. Do you know anything else I can do?

I am stuck, i don't want to break the plastic part inside of my psp but it's screaming in pain, how do i take the black plastic out EDIT: Nevermind i was able to pry it up with a tool and grease the gears without taking the plastic out. Thank you so much for the help!

If i remove the touch pad will have any problems? Can the console work without the touch pad? It horrible trying to play games with it.

Crazy to say this is the only video on the Green Lantern PSP. Definitely top 5 rarest

I did this with my psp and it worked, and i dont have much experience disassembling devices

<3

im not a technical person but i followed the tutorial and just successfully replaced the screen of my more-than-a-decade old psp go, thank you so much sir

Can you do the Video for red shell plz? jk

Hi, I have a psp 3004 from 2013 and it happened to me that I had charged the psp with a pc power supply and I think it burned the motherboard, I bought the new battery but a faint yellow light comes on on HOLD (turning the power button down) from the video it could be that you are right because I have to try it, but do you have any other ideas by chance?? you would be of great help

Bro I did this and mine stopped reading the discs 😢😢

I did not have WD-40 so I used Gun oil on a q-tip and put it on both the motor and the disc reader assembly and now it doesn't read discs at all. I can still hear the motor running but it can't read any disc. What do I do now?

i have a psp 3010 it turns on with the charger plugged in, even if I put my other psp battery on the 3010 it turns on without any problem, but when I try to charge the battery it won't charge, any solution? I've had this problem since 2017 but I still don't know how to fix it, greetings from Mexico I hope you can help me

Is there a way to just replace the front glass instead of the screen and everything else

Definitely ran into this on my 1000 recently! I put one together from a random box of parts, and I didn't initially pay attention to this!

It was very useful your video. Thanks a lot.

WORKED! On the same colorway as you have too lol the only thing is after it still kept making the screeching still but just let the game run for a bit and eventually it stopped. So just be patient with it!

It work for me on psp 2004 Thank you so much boss

I have a psp 1003 that i haven't used for years. With ot without battery, there is no red or green light when i plug in the charger, what would be the issue?

Did this and now my Go charges but won't turn on. Help !!!