Don’t buy this Samsung.

We've had our Samsung Top Load Washer for about 10 years and haven't had any issues with it. But it is due for suspension rods and a deep cleaning of the drum outside. We had this issue originally, and they came out, swapped something claiming recall, and it's been working fine since. We did change water lines, but that wasn't the issue since the pressure in the water lines never actually changed.

That is so beautiful. I wish these were still available. Idk why the company quit making them.

Watching this in 2024 makes me depressed that these have become so rare. The holy grail of rails

If it happens, don't return it, you have to make sure the hoses are not blocked, kinked, trapped, or pinched

Were your water valves even connected or your water inlet valves clogged? Or is your drain pump way too far down the drain pipe? That’s what IE means.

That is awesome! May i suggest looking into the vltor a5 buffer system and modstock and Leitner-wise enhanced buffer retainer ? Those and the a.r.m.s.#40L rear would be my personal differences for bigger parts. A nice two stage, non adjustable 4.5 lb trigger like rockriver arms triggers with oversized pins and kns antiwalk anti rotaion, oversized pins would be a what i finish it off with. From thousands of rounds of experience ,that rra trigger with .001 oversized pins is outstanding. 4.5 lbs is a 1.5 pound take-up and an icey 3 pound break . I can't over run its locm time either ,like i can with " milspec" semi-auto triggers. Sorry to rant , its good enough of a build that i am obsessing over simialr . Lol

Hello. Great video. Where did you get the fake can from? Thanks in advance.

Nice. Not too many vids on the HD. Very underrated if any info on it. The barrel and trigger are both match grade and what I like most is that all the features it comes with are incognito and clean looking. Cocking shoulder tritium night sights, ambi safety, unique slide serrations and trueto the standard GI guide rod. A tribute to all business under the all black package extremely underrated in my opinion. Mine is a tac driver and like you said the bobtail is a nice option for every day carry. Nice Sig as well. Thanks for sharing!

We got this same model well the newer one about two years ago? We don’t have any problems with it sometimes it will go off balance but that’s because my mom is too stupid not to overload it. I told her to get the frontload version because that’s what we had back in South Carolina cause that’s where we are from and when our house burnt we moved to Ohio when our house burnt to one of my aunts rentals. Is it or was it possible that sears (rip sears at least where I’m from and live) didn’t hook it up properly? We had the Kenmore series 100 HE Topload washed it kept having water issues until I realized lowes didn’t hook it up properly. It was a simple fix with my fingers we just had to turn the water hoses on. Or maybe your washing machine hoses didn’t fit your outfits properly?

Happened to me yesterday on my ar10 but I can’t get the top and bottom of gun to come apart

Heard a rip that I haven't tried and that's to use a simple silver hooked paint can opener.

Did it fit easy with the barrel nut and upper?

IE: is overfilling, Check the pressure sensor.

what about the samsung washer?

I had that very same thing happen to me when I bought mine, Mossberg's customer service took good care of me, once I got the parts I have had no problems with this gun it's been great. GOOD LUCK...

My friend...is this a carry model?

This gives me the MW2 Vibes

you still have that A.R.M.S. #50 rail?

What if it’s a life round… not the casing? I have a round in the barrel haven’t shot yet but when I racked it I couldn’t remember if I had a round already racked so I don’t want to shoot it out, is it possible to do a double load like that?

Wow imagine if the follower was Able To push another round in there And fire eeesh … I’m no gunsmith would that be from poor headspace or manufacture error on casing ?

Happened to me recently. Is there any way to prevent this? This will instantly put your gun out of action in combat.

When shooting steel ammo always use an AK

So What I'm learning is don't use cheap or steel ammo. I haven't done research but I see a lot of those

This same thing happened in my handgun and it won’t let me pull the slide back so you can’t even push it back with something… doesn’t look like anyone of the internet has even had this problem where it locks the slide. I really didn’t want to have to pay someone to unjam it for me but it looks like I’m gonna have to go that route :(

Shoot with this beautiful gun more

I had one like that for a while and it’s still going with no issues

throw a sprinco 5 coil extractor spring in your bolt with the rubber insert but no o-ring and you'll likely never deal with this again

Español

My COD GUN

That was in there pretty good. Mine usually pop out with just a shove

Wat could u compare a 41AE to??

Are you keyholing? Thanks

How is the accuracy?

dont use steel case tula ever in your ar..barnul or wolf..never tula..

All comments are idiots that don't know how to use the machine period.

I just bought one at Home Depot you let me want to take it back

It's crap take it back .kzbin.info/www/bejne/nqO8pIZtdr6Xd5I

Sig ALL day

The new formula of RIT dye does NOT work. Go to the RIT PROLINE web site and get the powder/crystal dye there. The RIT PROLINE is the OLD formula. The smallest quantity you can buy there is one pound but it'll be better than f...ing up your wood!

I have honestly never head of an Uzi in .41 AE. Very interesting. Have you used it at all in .41 AE? Or just 9mm? If you have used the .41 AE what's it's function and controllability like?

lmao here from cod

I have problem with my Samsung washer it doesn’t fill up even I set it heavy wash water is not enough, I have to fill up using jet water, once I’m trying to wipe clean the top glass when I accidentally touch the knob pushing it just a little bit, I heard a drain sound and all water laundry soap water wasted! So I have to start from very beginning again waste of time. Samsung probably need to stick with making television but not washing machine. I like the old american washer where I can able to Edit the cycle anytime I want without draining the water.

*This product is amazingly stylish and efficient~~>**allmy.tips/samsung_Washer?WW** After only 3 weeks I have already gotten my money's worth and implore others will have the same experience.*

Same issue since day one..piece of junk!!

A mí me pasó lo mismo pero con el código tE como le puedo hacer para solucionarlo

I have the same machine, newer model. Had it about 2 weeks and had to have service out. Now I moved it just a few inches to remove my laundry tub in order to replace the laundry tub. Now washer won't work, have moved it back in it's original position (in case it is that sensitive about being level)...still won't work!! I work in the construction industry and on a weekly basis recommend appliances to customers for their projects. I will tell people to ABSOLUTELY NOT BUY SAMSUNG!!! This is ridiculous! Shame on you Samsung for ripping people off!!!

Is this a chrome lined barrel?

Nice rail and overall pistol.

Buenas a todos soy de Nicaragua tengo una lavadora sangsun modeloWA456DRHDWR/AA quitó des blokearla pero no se como porqué todo esta al inglés me podrían ayudar