Thank you for your question! You can actually use any of the 2 with a different purpose: - POWER+GPS will give you access to the GPS data from a PC. - POWER+XBEE is useful to power the board via wall adapter, and then have the POWER+GPS free, in case sometimes you want to connect with the PC to check or change parameters. Both can be connected at the same time without problem.

You can enable the translation of subtittles. Just go to the Settings -> Subtittles-> Autotranslate and Choose the language which you prefer

Welcome aboard!

Thanks for sharing your experience. The results you mention might be specific to the postprocessing software algorithm being used. Could you share with the community which one are you using? With the integrated realtime rtk engine (u-blox or Septentrio) from our experience the receiver is able to discard these lower elevation satellites automatically, and there is no need for manually adjusting these settings.

We appreciate your feedback! In our personal life we are also techies and we understand it completely. Let us clarify that this is not a product for diy but rather for industrial companies looking into saving development costs. Usually there is a lot of technical support involved in a canbus integration which we also offer for free together with the purchase of the product.

@@ardusimple if you offer the support it makes sense i suppose :) from a industrial customer standpoint working as a planer for bmw i totally get that there is the market for it and you also wanna earn your money. still it needed to be said

Thanks!

Thank you! Visit ardusimple.com!

hola, no entendemos muy bien su pregunta. NMEA y RTCM son dos protocolos distintos. NMEA se usa para reportar coordenadas e información varia del receptor GNSS. RTCM se usa para correcciones.

we don't think so, Emlid flow only works with Emlid receivers, although you have plenty of applications similar to Emlid Flow on the Play Store

Could you please contact support team via [email protected] for faster techincal support? They usually reply within 24h!

this an advanced topic, a bit difficult to cover in a KZbin video since every viewer will have different knowledge level. If you have any specific request, you can contact us at [email protected]

actually yes, the programmable WiFi NTRIP Master based on ESP32 can be mounted on the socket: www.ardusimple.com/product/wifi-ntrip-master/

@@ardusimple I meant the ardusimple f9p micro, as we use in agOpenGPS a lot, I believe tx2/rx2 weren't wired right for that? The NTRIP master has nothing to do with dual as far as I know?

Yes, you can use NTRIP correction services. You can find RTK Correction Services in your Country here: www.ardusimple.com/rtk-correction-services-in-your-country/

Latest updates can be found at an official webpage of the US government www.gps.gov/systems/gps/modernization/civilsignals/ if you go to the section of "L5", you will find "Pre-operational signal with message set "unhealthy" until sufficient monitoring capability established" and "However, L5 remains pre-operational and should be employed at the user's own risk until it is declared operational."

The price comparison is only a small part of the 5min video. Prices change over time and tend to go down, when the video was released all the reliable units we tested had same price for L1+L2 and L1+L5. Notice that we are talking about RTK enabled GNSS receivers. L1+L5 non-RTK receivers are cheaper, but so are L1+L2 non-RTK receivers.

@@ardusimple the price comparison may be only a small part of the video, but it is an essential part and misleading! I am also talking about RTK-enabled GNSS receivers. L1+L5 RTK receivers are clearly cheaper than L1+L2 RTK receivers. Let me not make examples of competing products now...

Thank you for your comment, you make very good points that we will be happy to discuss: - GPS L5 satellites today are still broadcasting with the healthy flag OFF: any receiver outputting raw data can confirm this. For this reason many vendors even if they have L5 in the specification sheet, today their default configuration is still with L5 disabled. - CORS networks. "Premium" CORS networks are indeed L1/L2/L5, but low cost (which are the ones attractive for low cost users) are still highly populated with L1/L2 receivers. Some countries have the luxury of having free L1/L2/L5 CORS networks, but this is not the case in the majority of countries and majority of installed base stations. After the launch of ZED-F9P 5 years ago, the number of L1/L2 base stations installed globally has boomed. - Interference immunity. Unfortunately in a 3 minute video it is not possible to go into all details, we only try to provide a general guideline. If you want interference immunity, go for an L1/L2/L5 receiver. Trying to guess if L2 or L5 will be less jammed it's just betting. GPS signal arrives to the ground around -130dBm (for the non techies this is dividing by 10000000000000 compared to a WiFi transmitter). Anything jamming L2 can potentially also jam L5.

Thank you for your comment. Note that the video is regarding low cost RTK receivers and not related to standard GPS tracking. Actually we have both L1/L2 and L1/L5 receivers in our portfolio and we are happy to sell both. But today the number of customers having a bad first experience with L1/L5 receivers in increasing, and we are just trying to make their life easier based on our own data.

Actualmente es el equipo base rover con RTK más económico del mercado :) Seguramente en los próximos años los precios se reduzcan.

Subtítulos en español disponibles. Si tienes alguna duda escríbenos a [email protected], el equipo técnico puede brindarte soporte en español

Hello Roger, thank you for your comment. The setup you'll need depends on your specific use case. If a customer has access to the NTRIP correction service, the simpleRTK2B Starter Kit is the minimum required for achieving centimeter precision. We’ve outlined more options for your reference here: www.ardusimple.com/rtk-in-5-minutes/

What is the cheaper alternative you have found then ?

@@pierholtrop5432 I never did find an alternative. I eventually gave up on the particular project I was working on at the time. And it's too bad, I had been working on the project for years, basically waiting for something that gave the kind of accuracy my project needed. So when this came along it looked like I'd finally have what I needed. But, no, way too expensive.

@@RogerGarrettyears ago you’d have to pay several thousands for this technology so i think price is very affordable compared to older tech

@@pierholtrop5432 Affordability is not related to how much the price has come down over the years. It's related to the buyer's finances and the value that the eventual use of the product provides to the user. For me, it's still not at a price that I can afford nor will my particular use of it be justified by the price.

Thank you for the question. There's in general 2 types of dual band receivers: L1+L2 and L1+L5. Let us answer with an example: if you have an L1+L5 rover and you connect it to a L1+L2 base station, it will only be able to use L1 correction data, and not the L2 one. As L5 correction data is missing this will lead to very poor performance on your rover.

@@ardusimple Thank you for explanation

Dear customer, I invite you to start with our RTK assistant www.ardusimple.com/product/completely-lost/ . in a few questions it will suggest the suitable products for your usecase All our products are compatible with SW Maps. I invite you to check our database of tutorials: www.ardusimple.com/tutorials/ . If you have any questions, feel free to contact our support team [email protected] , they usually reply within 24 hours.

The product offers sub-meter level accuracy when used standalone, in the range of 0.8 to 1.2 meters of accuracy in open sky conditions depending on the part of the world where the device is used. As for the subscription, our products never included SmartNet subscription, but we do offer u-blox PointPerfect trial period.

Dear customer, thank you for your message. Our support team will be happy to reply your questions. Could you please contact us via email [email protected] or via contact form www.ardusimple.com/contact/

Dear customer, thank you for your message. You can follow this tutorial How to use centimeter GPS with any Android app (mock location) www.ardusimple.com/rtk-mock-location-with-android/ In case of any questions, feel free to contact ArduSimple team [email protected], support team reply within 24 hours.

We have prepared many tutorials: www.ardusimple.com/tutorials/

Dear custopmer, we invite you to check our RTK assistant to find RTK products which the best fit for your needs. With a few simple questions we will recommend you a list of products and tutorials. www.ardusimple.com/product/completely-lost/

Thank you for your suggestions! We value your input and will keep it in mind for future youtube videos. Feel free to reach out if you have any more ideas or questions!

Dear Customer, thank you for your suggestion. We have taken note of it in our backlog. In the meantime, we invite you to explore our user guide for MR/LR/XLR XBee Radio, which can be found at the following link: www.ardusimple.com/xbee-antenna-installation-guide/

Dear subcriber, thank you for your feedback and suggestions. These topics are also on our list. We cannot say exactly when these topics will be covered in our videos, but we will try to take into account the wishes of our customers.

Hi Chris, not sure that we understand your question. In this video we use a simpleRTK2B board that uses u-blox ZED-F9P GNSS receiver.

@@ardusimple what can I do with gps module in this software? I use this module in Rc model plane

@@Chris-vc1dh with this software you can change the configuration of your GNSS receiver (e.g.: enable/disable constellations, increase frequency output, ...) It can also be used for troubleshooting when having issues with your receiver.

Hello Greg! Sure we can help you. Could you please write to ArduSemple support Team [email protected]? The average response time is less then 24 hours.

Hi, unfortunately we don't know the details of NEO-6M module since we only work with ZED-F9P. We suggest you ask at u-blox official forum

Hello Vladimir, you can find a tutoria here: www.ardusimple.com/rtk-mock-location-with-android/

@@ardusimple how much will it cost to deliver to Kazakhstan?

@@vladimirv9791 should be around 17,5€ and should take 2-3 working days excluding custom release time. You can simulate the shipping cost by entering your information in the checkout page.

Could you please write us [email protected]?