jeepNtreetop

Пікірлер

@svporqueno Күн бұрын

never trust someone who drives a ch(j)eep.

@420happybat 18 күн бұрын

When one does their own and follow what is done we’ll make sure one uses a silicone seal as it will let water into your setup

@crissgen 24 күн бұрын

Thanks for the video, very nice box ,is still working on 120 volt or on 12 volt ? If is on 120 V it used less watts consummation?

@sheiteish 28 күн бұрын

Your jeep is bad ***

@jeepNtreetop 27 күн бұрын

Thanks! It has treated me very well

@bradenkorwin-kuczynski6025 Ай бұрын

I have a mountaineer stove and was looking for just this kind of guide. The tube flare was stumping me and when I saw you drill out a the fitting it all became clear. I'm going to try to use the factory recessed mount so that the QC barb is more or less flush with the stove like factory.

@jeepNtreetop Ай бұрын

It’s been working great for me. Just make sure you use the LP specific quick connect and make sure that you have no leaks at the flares before final reassembly.

@tigeraterra69 Ай бұрын

THATS Battle Rock. ,covered w poison oak!!!! be carefull! has a great history w th ROGUE INDIANS!!!!

@SoulRoadFL Ай бұрын

Installed one on my Tundra. Awesome. So awesome our agency wanted me to install one on a surveillance vehicle

@jeepNtreetop Ай бұрын

That’s great to hear! Mine is still running strong with zero issues.

@tomgorden3762 Ай бұрын

That’s what it’s like when addicted to the internet.

@aaronjohnston1584 2 ай бұрын

Why is the choke not needed?

@jeepNtreetop Ай бұрын

The choke is there to cut down on electrical noise from the motors but since the motors are removed, the choke is no longer necessary.

@dalenoble3987 2 ай бұрын

New to Starlink so not really understanding this concept, how can this work if the dish needs a rotary motor to move the dish to find the satellites ? Does it not need to find its degree angle to fix its self to the satellite ?

@jeepNtreetop 2 ай бұрын

No it does not. The dish is a phased array and electronically “points” at the satellites. The dish just needs to be pointed straight up at an unobstructed sky.

@dalenoble3987 2 ай бұрын

@@jeepNtreetop so question then , if I was to purchase the flat mount , how would it be able to melt the snow off if it’s in another case ?

@dalenoble3987 2 ай бұрын

@@jeepNtreetop was thinking I’d like to mount the dish flat mount on top of my iceshack / camper but not sure about the snow accumulation it would get if the heater is no longer functional being in a second case

@jeepNtreetop 2 ай бұрын

Contact Brandon Walsh at Star-Mount Systems, he is the owner of the flat mount conversions.

@stevedionne2252 3 ай бұрын

if you find this too much work to set-up install it permanent flat mount🧐

@Rboling4199 3 ай бұрын

Awesome Stan! -Rick (Liberty Auto City)

@Appalachia02 3 ай бұрын

kzbin.info/www/bejne/g3XYp4eGi7J-rqssi=sEB6d-tk0zWwLcgu

@kingsleymok4008 3 ай бұрын

How about a bigger dish for better reception? I would personally use a silicone or liquid rubber sealant all around the edge to ensure a tight closure. Should do a continuous ping, throughput and latency test while driving. By the way, Huawei has satellite phone call on their latest model.

@vickimathews1970 3 ай бұрын

Great video, thanks for teaching us how to do this. I've seen a video where you can just pull apart the front from the back of the dish as it's only glued together, could you possibly use the top without the extra part of the back that's left over when you cut it with the Dremel, or do you need the extra back left on?

@elliotallen1 3 ай бұрын

did you ever find out if you can just pull the face off?

@vickimathews1970 3 ай бұрын

@@elliotallen1 nothing from my question as yet, I've seen someone else pull it off and have a casing created to house it in and then lay it in their vehicle window and it worked on 12V.

@GLTechnologies 4 ай бұрын

Hi jeepNtreetop. Great video! Love it!!!

@garychan6259 4 ай бұрын

Hey folk : how can contact them? Are you in USA? I am in Canada. Thank you.

@jeepNtreetop 4 ай бұрын

Contact Brandon at Star-MountSystems.com his number is on the website.

@salmcrantz 4 ай бұрын

How do you recharge the lithium battery? Can you please share a link to the lithium battery that you used?

@jeepNtreetop 4 ай бұрын

My Jeep is a custom build, you can use any 12v source that is convenient in your vehicle, just make sure that it provides a stable 2 amps.

@salmcrantz 4 ай бұрын

How do you recharge the lithium battery? Can you please share a link to the lithium battery that you used?

@jmvs1983 4 ай бұрын

be careful when ordering starmount products, i ordered 2 mounts and a bunch of accessories on April 2nd and was told it was backordered 4 weeks, I still have not received anything and am trying to get my refund... think twice before ordering

@jeepNtreetop 4 ай бұрын

There are thousands of Starmount units in the field and I have not had an issue with my unit. Although I am not in any way directly affiliated with the company, I found Brandon very responsive to all my inquiries and questions. I do suggest you contact him at the current phone number listed on their website since it has been recently updated.

@studioid2992 4 ай бұрын

Hello sir, I'm from Indonesia, are used antenna items for sale?

@bentree5541 4 ай бұрын

Thanks from Australia for the video! I've got a slight problem though, followed all of these steps but I'm only getting a low pressure flame now. I noticed that the hole in my flare fitting reducer piece is much smaller than the one I drilled out in the flare nut, would this likely be the issue? Should I just drill through the flare fitting with the same drill bit to allow gas to flow through quicker? edit: i think the problem actually lies within the hose and regulator I'm using, its a low pressure regulator so I'll swap it out for a high one like you listed and I feel like that should fix the problem :)

@stewartrobertson1215 4 ай бұрын

Yes, looks very easy and it is. However, after my modification the router kept dropping out and eventually was unavailable. I managed to remove the dishy and did a hard reset on the router which got my a signal from the router, but now the dishy will not move off from “booting”. I have no idea what to do now as Starlink won’t be interested because I have butchered dishy and Star Mounts don’t seem to interested either. I am seriously thinking about buying another dish and stick with placing it on the roof. The star mount and removable mount shall need to stay on my RV roof as a very expensive ornament. If I could return the lot I would as after 4 days of fault finding and 1 day of use I’m not happy but I live in Scotland so not easy. I would seriously think hard about what your are doing if you select this product and the support or lack of you may get or not as the case may be. If this item was bought local I would be at the door demanding a refund

@jeepNtreetop 4 ай бұрын

Stewart, sorry to hear that you are having troubles. I’ve had mine running now for over 2 years with zero issues. In reading the many forums most folks who do 12v conversions and have problems tend to trace the issue to an unreliable “stable” and strong enough power supply/source. Maybe start there?

@stewartrobertson1215 4 ай бұрын

@@jeepNtreetop Hi, thanks for the suggestion. I rigged up a fluke meter measuring the supply voltage at the terminals inside the mount and it had a constant 13.6volts for 12 hours. On checking 24hours later it was still 13.6Volts. I checked the output voltage on the 12V to 48V output to Starlink which is correct. So think we can rule out supply voltage. Interestingly, heard nothing from Star Mounts in 7 days, shockingly bad customer support.

@eduardoblackstore 4 ай бұрын

top the content, you can find the link to the one you used to make it 12v, I wanted to build mine here in Brazil.

@jeepNtreetop 4 ай бұрын

Contact Brandon at star-mountsystems.com/

@stevesmith8219 4 ай бұрын

What a rip off! Over $3000 for the mount kit displayed in this video. There are other effective ways to do the same thing that cost next to nothing. Keep searching.....

@jeepNtreetop 4 ай бұрын

I’m not sure where you got that price from.. the standard flat mount pictured in the video is $379 on www.star-mount.com

@mjaymes2769 5 ай бұрын

Upadate on the starlink? Any issues since you installed flat mount?TIA

@jeepNtreetop 4 ай бұрын

None whatsoever. It has been working great. In-motion as well.

@Cocodaeditgurl 5 ай бұрын

I live there and it’s incredible

@SYNCROORG 5 ай бұрын

Thanks for all the hard work just to save me some time! Nicely done.

@jeepNtreetop 5 ай бұрын

I’ve been using this setup almost daily now for over 2 years without issues.

@andre.salviano 5 ай бұрын

Olá tudo bem? Gostaria de saber se essa case tem parafuso de respiro para aliviar pressão dentro e se as starlink estão queimando dentro dessa case por causa da pressão e o calor?

@SuperFredAZ 5 ай бұрын

Great video saves power and makes sense.

@jeepNtreetop 5 ай бұрын

Thanks. It’s been working great so far.

@howie954 5 ай бұрын

All you need now is one of those 12v converters and connect GPIO.

@markforss 5 ай бұрын

Is the waterproof connector to the right of the power for a direct Ethernet cable to the router? Is that a female connector there or something else?

@jeepNtreetop 5 ай бұрын

Yes exactly. A direct connection to one of the router ports.

@CraigKenny-or4ie 5 ай бұрын

Friendly Caution: The antenna emits 12Ghz radio at 4 Watts on transmit. This is done using phased array beam steering. 1st. the transmission pattern of the antenna has a significant side lobe leakage that emits forward along the plane of the antenna (Into your windscreen). 2nd the antenna steering can be as low as 60 degrees from vertical. Not quite centre of your head but very close. This steering is dynamic as the antenna tracks moving sats. I would not every consider placing a starlink antenna transmission plane (face of dish) in any orientation where it exposes humans regardless of the period of time they maybe exposed. FCC has a prescribed limit of 1.6 watts per kg for humans. The issue with the sat antenna being it is not a cell phone or a cb radio. It is a highly focused beam array that produces significant gain in the direction to which it it transmitting. I would not like to drive in your car for any significant length of time. Sorry to provide negative advice on what looks to be a very fine installation and quality work. Science just gets a little in the way for long term risk. Hope the info starts you on a journey to evaluate that risk for your self. Bet of luck.

@deursloten 5 ай бұрын

Aan de vier pootjes van het frame heb ik 4 magneten gemonteerd (boutjes niet te vast plaatwerk auto is niet vlak) AMAZON ca 12 euro

@tonygiboney6417 5 ай бұрын

How is this working today and do you still recommend all the parts?

@larryaubertin4226 5 ай бұрын

Hey there, My Starlink went down yesterday and Starlink has refused to replace it because they say that i used a sub standard mount system, it's a gen 2 dish and I've lost communication with it. There's no sound coming from it and it won't stow so i'm thinking it's lost the power source, any thoughts??

@ghosttoo7467 6 ай бұрын

This is for Brandon i wonder if you still have those starlink motor that you were given away or tossed them in the garbage i wonder if you can ship couples of them to canada

@jeepNtreetop 6 ай бұрын

Call Brandon directly, the current number is on his website.

@MarkFinley-sl8mv 6 ай бұрын

Stan - I did all of this - installed my 12v all-in one ..... worked great for a day ..... then I parked under a car port - and forgot that the SL was still in "ON". switch position. Now everytiem I plug it in I pop the 10 amp fuse in my fuse panel. Any ideas what to look at ?

@jeepNtreetop 6 ай бұрын

I’m not sure why parking under a carport would have any effect on the unit. The Starlink would just continue to search for a single. Try contacting Brandon at Star-Mount Systems. The number is on the website.

@MarkFinley-sl8mv 6 ай бұрын

@@jeepNtreetop - Yes - my only thinking ws that it may have interpreted the loss of signal. to obstruction by snow - so turns on the heating function.

@AVMAR 6 ай бұрын

How about for the Gen 3 ?

@jeepNtreetop 6 ай бұрын

@Avmar, Star-Mount has a new line of mounts for the Gen3 as well. star-mountsystems.com/

@LivingToGo 6 ай бұрын

Hello, great video. Thank you! Could you tell me what kind of pipe system you have installed in the Cokpit. The one on which you have attached cell phone, monitor and iPad holders. Would be super nice. Thanks in advance and good luck.

@jeepNtreetop 6 ай бұрын

The bar is made by Vector Off Road, it’s nicknamed the “vector bar” and all the mounts that attach to it are made by 67 designs. Both companies make all their products in the USA. 🇺🇸. There are other cheaper knockoff copies out there now.

@robreighter2851 6 ай бұрын

I’m so impressed! Very thorough, very helpful!

@jeepNtreetop 6 ай бұрын

Thank you.

@SoulRoadFL 6 ай бұрын

is the RV plan the one to use from Starlink?

@jeepNtreetop 6 ай бұрын

When I originally signed up it was called the RV plan but now they just call it a roaming plan.

@TaylorMiles 6 ай бұрын

is this for gen3 or older gen2?

@kalarakmcgrath5139 6 ай бұрын

Used the same yaosheng kit. It worked at first but buy 9pm starlink disconnects and it didnt get fixed. Faulty product?

@jeepNtreetop 6 ай бұрын

Most issues are traced to the 12-48v voltage converter. Make sure you are getting the correct voltage output and connect directly to your battery

@kalarakmcgrath5139 6 ай бұрын

@@jeepNtreetop I used a multimeter its output is 48v

@kevinmc7692 6 ай бұрын

I like the hood mount. I would likely mod a hood scoop and make it look aerodynamic. Great video!

@walterrodrigues4220 7 ай бұрын

Boa tarde Qual link eu posso acessar para comprar? Gostaria de comprar esse suporte da antena pois aqui no Brasil é um valor muito Alto

@mellow_mushrooms 7 ай бұрын

Would that suction cup hold on my GPS unit to the windshield and not fall after a few months?

@jeepNtreetop 7 ай бұрын

Those Sea Sucker suction cups are the real deal! They have a pump on them with an indicator, so if they ever start to loose suction, you just push the plunger a couple of times and you’re good to go!

@4xenomad381 7 ай бұрын

Thank you for the advice sir

@muceda 7 ай бұрын

can you please share how do you provide power to the starlink modem and antenna? Or recommend me something simple for my Honda Pilot 2016 … just need to power the starlink and charge 4 different phones at the same time

@BasieCara 7 ай бұрын

Hi there what are the cost i need one i am in south africa thanks

@jeepNtreetop 7 ай бұрын

Contact Brandon at Starmount-Systems. They ship worldwide. star-mountsystems.com/

Ең жақсы KZbin

Пікірлер