Thanks Royce, that fixed mine😎

Nice!!!

Thks a lot man. Wish I tried this earlier.

man how does it feel this tmr for precision ?

Whats the machine you are using to desoldering? May you share? Regards

Nice setup dude.

thank you

Great job 👍🏻

I eventually ended up buying a Razer Basilisk and trashing the G502, the Razer Basilisk is very similar to a G502 Hero but seems better made.

How can you fix when calibration after replacement is not allowed on the enhanced

Didn't the cable to the antenna break when you removed the battery? Maybe that's why the pen doesn't work?

To get those scratches off I use the JFJ as a sander only, (10 or 20 seconds )then I throw it on the Eco pro 2 with 4 minutes and the disc comes out as new

It's water on the cotton swab ??

この間、ノイズ音がしたのでスピーカーの掃除をするために動画を参考にしました！ありがとう。 Bluetoothが故障してしまったようで、（接続音はなるがすぐに切断される。端末上では接続された形跡はない） 基盤のBluetoothの部品を交換すれば直りますか？？

Crazy, i never thought this is a common problem. Thanks!

I hade my HDD and SSD both failed after power surge, I replaced the motherboard and got new SSD but I still need my data. Do you think it will be just a fuse that need to bypasses to get my drives working again?

nice work

Bruh, I hate when they make stuff thia annoying to open... Currently cleaning out a lung cancer ps5 and need to open the psu to get the dust/tar out. I need to start selling air purifiers to my lung cancer customers...

I just cleaned on of these and it pumps compound and water good. But it seems when I close it that bothers me the compound nozzles and water nozzles touch the CD barley. Is that right? Does it matter what direction the compound nozzles face? Seems almost as if it’s not delivering enough compound or water from the sound of it when it’s running.

Thank you, removing the battery resurrected my Tivoo! I usually use it with a 5V 1A charger, however I had to first connect it to a 5V 2.4A and disconnect several times before being able to use my regular charger again. Nevertheless it is working fine only with that little board connected without battery.

I need a bit of help. I what you did unclogged mines, and now the tube from outside isn’t sucking the solution out the bottle. I’m not sure why but everything is connected and cleaned. The water tube works fine it sucks the water out of the bottle but not mines.

Hey man I have a wierd problem with my vhs dvd combo player. I opened it up and I’m still having wierd problems. Is there any way I can send you a video and you could give me tips. Thank you

Hey man, this video helped me gain the courage to open my vhs dvd combo player. But I think I have a pretty unique problem. If there is anyway I could contact you or at least send you a video of what’s going on that would help a lot thanks.

What problem did you encounter? My CoffeeJack has stopped producing any pressure no matter how many times I pump (it worked okay initially). I've remove the valve thing (the one with the 5 screws) a couple of times to reseat & check that rubber valve, but no go. Perhaps it's that metal pressure valve that's the issue? And when you said you replace the rings, are you saying you bought new O-rings or just reinstalled the factory ones? I've tried contacting CoffeeJack through Twitter and Facebook, but no response! And I've tried everything on their FAQ pages.

Hey Royce, i know this is asking a lot for something you posted a year ago, but could you possibly do a follow up on this video. your video is sort of all over the place. I see you have water from the tap going into the pump, from the pump I'd assume it's going into the corny keg and then from the keg into the carbonator? how does the pump know the corny keg is full, is it because it's going off the carbonator's float valve? so it draws water from the keg, fills the carbonator tank and whatever you consume it fills the keg for the reserve? so do you T off the c02 tank to be able to pump water from corny to carbonator tank? i think that's right, but I hope you read and comment. also, how cold does ur fridge get, they say to be below 40F for proper water carbonation. I'm looking into a kegerator for this purpose instead of modding a completely fine fridge.

Thanks so much, fixed the right click glitching on me. It's an old mouse I've had for 7 years now but my absolute favorite. Btw the amount of dust and dander at the bottom of my mouse was very shocking lol thanks again for saving me money from buying a new one.

Same here but it is a SILVER EDITION

Usually this type of fix is only temporary. If you're handy with a soldering iron, or know someone that is, I recomend replacing the switches with TTC Gold 80M.

Good morning, I have a problem with my equipment, when I pour the root beer it comes out with a lot of foam, I have a kegerator with a 13-foot hose to the dispenser, I use a CO2 tank, do you think you can help me?

A PS5 Power supply is not that complex. Its easy to fix, everytime

I wanna add syrup to it for flavoring would i just add it to corney keg before putting it in the system or can u just fill another Corey keg with syrup in it from the one in the system with a jumper would that work ? does anyone have any experience with that

I just gave few hard slaps on my mouse button and blow 🌬️ co2 from my mouth and now it is as good as new.

Same problem, Will look now all the way, the entire video and get back with my comment.

Hello, nice video. Do you have a video opening Divoom Dito Pro?

Hey! Anybody may help me? I have a G502 Hero, and the Scroll left and right click just weird, sometimes work perfectly, sometimes the left decide to not work only after a 100 clicks, but then the right may do the same. Any idea what could cause that?

Thanks 👍

What does this mod even do? I avoided the LAN upgrade because I generally believe the software for these things is ass anyways haha.

Always never be done

Worked for me!

THANK YOU BROTHER I was going to go to repair shop which would be a pain aside from the cost I would need to drop my mouse and go without one for a day or two but now it works. Hopefully it won't break anytime soon cuz I'm broke af rn

Its Work Thanx man

thank you for this!! just successfully cleaned and fixef my controller because of this vid 😊💕

I did this and it fixed it temporarily but after about it a month it went back to normal, anyone know a permanent fix?

Where did you buy your chips from cause they expensive on aliexpress?

I see slots for rumble motors I wonder if it’s possible to add rumble to these things

I didn't expect this one to turn into an episode of JerryRigEverything haha. Dang man this is some serious surgical shit.

OBRIGADO PELO VIDEO MEU MOUSE VOLTOU A FUNCIONAR

Are you fixing clients pens or are you flipping them? Amazing video I love this type of stuff! Subbing <33

It’s broke

thank you for sharing this video, i just opened up this same exact controller to fix mine thanks to this video and its honestly not a bad design compared to what i have seen... its not as easy to clean BUT it is much easier to change the entire analog stick off of the PCB. i guess there are always pro's and con's to designs... you want it easier to service or easier to change out completely? can't have both.