8 ай бұрын
Пікірлер
@宇宙第一带路党 2 сағат бұрын
for the liquid metal, how is it safe when there is a risk it might touch the pins under the ihs?
@YoutubeTolol-e2x 20 сағат бұрын
can anyone tell me how thick is it thermal pad? planning buy there many size so need know base thermal pad size.
@Stark1ller Күн бұрын
Kann man es mit zwei Metallwänden ab Werk statt mit einer Glas- und einer Metallwand kaufen?
@romankorczyk6493 Күн бұрын
Baffeling how a human can create such a stupid thing
@simonsilence Күн бұрын
Oh boy. You guys should take this vid down, seriously. Both approved methods in this vid are absolute garbage. The first one shows about 1/3 non contact on the transparent plate and the second one applies liquid metal to an open contacts processor without a catch plate OR contact covers OR metal incompatibility warning. Thats straight up incompetent.
@angelmelko 2 күн бұрын
I am more concerned about the power draw from the power supply. At max, 1 card is like 400 watts.
@Николай-ю5д6ч 2 күн бұрын
Неправильно ты Петька колбасу на бутерброд ложишь😂
@karelruzarovsky3923 2 күн бұрын
Hello. I watched few reviews on the DX case (bought it few days ago) and in some of the reviews they suggest I remove the upper ventilator and move it to the front (so there would be two ventilators in the front and one in the back, and no ventilator on top). They say that way its better. Can you comment on this please? To me its strange that you would ship a product without testing these ventilator configurations and choosing the worse one..
@bosnianclowngaming4423 2 күн бұрын
Does my motherboard have theese input connectors for this cooling? B550M-A Asus. Thats all im worried about 😅
@theeradicator110 2 күн бұрын
I dont have those weird brackets things for the AM4/AM5 MoBo, they weren't in the box
@bloopasonic 3 күн бұрын
@bequietofficial Did anyone ever attempt to use this case in a build before it got sent off to production? The front dust filter is a joke. The "door" is incredibly flimsy and the mesh is so loose and bulging that it rubs against the front fans. It be not so quiet with 2 140mm fans chewing their way through the dust filter at 1700 RPM. How such a moronic design ever made it past QC is beyond me.
@megahurts2 3 күн бұрын
Anyone have an idea's as to why my Dark Rock Pro 5 won't exceed 1600RPMs? On the performance mode it's supposed to go to 2000 RPMs. Already maxed out the fan settings in the BIOS to force it to 100% fan speed, and when physically switching to 'Quiet Mode' it drops down to 1000RPMs. If switched back to 'Performance Mode' it then goes back up to 1600RPMs. Overall it cools very well (AMD 9900X idle sits at 100F), but I was hoping for a bit more speed out of the fans for heavy load conditions.
@jackmarks4226 3 күн бұрын
how do i install the cables for pure power 12m 850w onto Lenovo ThinkCentre M910t motherboard, the original power was connected in 2 place on the motherboard 1 place with 10 pins and 1 place with 4 pins, i cant figure it out even after watching this, please help, thanks
@ZimZamoo 3 күн бұрын
9 peas of thermal paste?
@amarjamakovic1297 3 күн бұрын
How do you set up the side fan on this thing?
@Braindeadboi22 3 күн бұрын
Who designed this tutorial? It dosent help at all
@killerthrillzmar8871 4 күн бұрын
yeah uh that bottle is not enough to fill the entire loop soo.....\been there done that
@homehome1542 5 күн бұрын
Has anyone got the link to the 1st video?
@bequietofficial 4 күн бұрын
kzbin.info/www/bejne/pmiUh2mwgd6Vn8k 🤓
@homehome1542 3 күн бұрын
@@bequietofficial Thanks!
@medwet84 5 күн бұрын
Chyba jak nie nakładać pasty😂
@jackspear6101 5 күн бұрын
I would use this pc to game with my son and nephews
@randyd9805 5 күн бұрын
I'm going with the first one. I love to waste extremely expensive thermal paste. Makes my day! The more the merrier is what I always say.
@NikiSama698 5 күн бұрын
i don't have a 3 pin connector for the RGB on my mainboard, what can i do?
@philbadelphia 6 күн бұрын
Excellent support on these pro PSU. Very impressive.
@bequietofficial 6 күн бұрын
Thank you!
@Madkix 6 күн бұрын
so this might be a stupid question... is it safe to remove the stickers from the back? I don't like the look of the sticker with the voltage and model information on it.
@kyleefthemes 6 күн бұрын
You're the only video that recommends spreading the paste and I don't know why. I don't like leaving a dot or line, in case it doesn't spread evenly. Thanks for affirming my thoughts :)
@Peterwp 7 күн бұрын
Questionable thermal paste application method in the intro, im a big fan of your products, i have replaced all the fans in my fractal north and added one for exhaust in my pc build
@Frapsmedic 7 күн бұрын
Noob question, i just started building my new pc, can i use the 12V-2x6 on a 7900xt hellhound?
@guilherminhu 7 күн бұрын
Actually both cards will work together on some dx12 games where the native dx12 multigpu was enabled by developers, since dx12 has its own multigpu technology. I can name two RD2 and SOTR, but im not the having the means to test every game.
@sousis21 7 күн бұрын
I am confused for my new i5 14400f i am beweeen pure rock 2 slim and pure rock 2 fx what is the suitable for the cpu?
@bequietofficial 5 күн бұрын
Hey, have checked our CPU cooler check tool? www.bequiet.com/en/cpucoolercheck
@Osamakhanj4u 7 күн бұрын
✨💝
@bequietofficial 7 күн бұрын
🧡 🥳
@RetroPixelYT-x2m 7 күн бұрын
Also here: 0:40 can you place it wrong or if you have made a mistake can you lift it up again and try again?
@RetroPixelYT-x2m 7 күн бұрын
I have heard that the MC1 Pro works with the PS5 Pro.
@bequietofficial 4 күн бұрын
The MC1 works - the MC 1 Pro not.
@dsm6775 8 күн бұрын
Wann kommen dir light wings reverse Lüfter endlich? Habe das light base 900 gekauft. Und würde mir gerne noch 3 reverse lüfter kaufen.
@bequietofficial 7 күн бұрын
Moin, diese werden ab April im Handel erhältlich sein. Ein begrenztes Kontingent ist allerdings bereits bei uns im Ersatzteileshop verfügbar: www.bequiet.com/de/spareparts?category=2001&serie=5444&product=5445
@rcalles200 8 күн бұрын
How to unclip and take it out?
@bequietofficial 6 күн бұрын
Just the reverse way of the installation process 🤓
@davidearley190 8 күн бұрын
If it won't go in, you have to tighten the black screw inside the slot where the rails go to make more room for the rail to slide in and snap into place. Once I did this, the last rail finally snapped into place.
@qhilix3958 8 күн бұрын
Meine Pumpe quetscht was kann ich dagegen tun?
@bequietofficial 4 күн бұрын
Moin, meinst du deine Pumpe quietscht - also macht seltsame Geräusche? Wie lange hast du deine be quiet! AiO schon? Wir empfehlen nach etwas 2 Jahren mit der mitgelieferten Kühlflüssigkeit deine AiO aufzufüllen. Wende dich aber auch gerne an unseren Service und lasse unsere Kollegen sich das Ganze durchchecken: www.bequiet.com/de/contact/service Auch gerne telefonische unter +49 40 736 76 86 44 (Montag bis Freitag 8:30 Uhr bis 18:00 Uhr UTC+1)
@Josh-s2k3b 8 күн бұрын
"made in germany" my ass. Clearly made in an asian country.
@HidanRP 8 күн бұрын
Too much thermal paste, bad example.
@shakultra 9 күн бұрын
I'll come back to this comment if I need to default my settings to what you said then reconfig from there 40°C - 16% Everyday office work, KZbin, and web browsing; inaudible operation. 48°C - 43% Maximum threshold for quiet operation, still pleasant and quiet. 64°C - 52% Under a CPU stress test like Cinebench; moderate load. 71°C - 52% Heavy load under Cinebench; remains quiet and efficient. 80°C - 81% Maximum CPU temperature for high-demand tasks; fans ramp up for cooling. Above 80°C - 100% Fans run at maximum speed for emergency cooling.
@mateuszmilde7006 9 күн бұрын
Hey, hab die Light Loop 360mm und ein Gigabyte Gaming x v2 mainboard wie Steuer/ Schließe ich die AIO richtig an ?
@bequietofficial 5 күн бұрын
Moin, hast du dir schon unser Installationsvideo zur Light Loop angeschaut? kzbin.info/www/bejne/i4SpmKp7h5WSfsU
@Vlauyau12 9 күн бұрын
Can I get a bit of help with some info? I got the be quiet pure power 12m 850w and I thought it has 4 PCIe connectors, but in reality has 2 such connectors and each one has a cable with 2 heads 6+2 PCIe. I need 3 PCIe cables for my gpu 7900XTX. Many people advise against daisy chaining with this GPU since its very power hungry (+450W in load). My question is, does this count as daisy chaining? Since I only connect 2 cables to the PSU, does each one only offer 150W, so in total 300W (+75W from the PCIe slot), or can they offer more power than that?
@stanvlad9496 23 сағат бұрын
Hey, did you manage to find the answer for this question? I'm exactly in the same situation right now, and returning my PSU for another one would be a nightmare.
@Vlauyau12 20 сағат бұрын
@@stanvlad9496 Hello, I've only had the PSU for a few days now, but I used the PCIe cables it came with (the daisy chained ones) for the 7900XTX and I didn't have any problem or instability so far. I ran stress tests for 10+ minutes and I didnt have any crash. I also overclocked the GPU to 3000mhz with +15%PL and ~1095mv undervolt and tested in games and everything ran smooth with no crash or instability. From what I've read on a few tech forums, the high quality PSU brands usually design the PCIe ports on the PSU and the cables able to withstand higher power, so the daisy chained cable should be able to carry ~300W which is split to the two 6+2 heads connected to the GPU and offer the same power as 3 different cables. Also in the manual of this PSU there's a schema of how to connect properly the cables in case of a GPU with 3 PCIe connectors,
@Vlauyau12 17 сағат бұрын
@@stanvlad9496 Hello, I've only had the PSU for a few days now, but I used the PCIe cables it came with (the daisy chained ones) for the 7900XTX and I didn't have any problem or instability so far. I ran stress tests for 10+ minutes and I didnt have any crash. I also overclocked the GPU to 3000mhz with +15%PL and ~1095mv undervolt and tested in games and everything ran smooth with no crash or instability. From what I've read on a few tech forums, the high quality PSU brands usually design the PCIe ports on the PSU and the cables able to withstand higher power, so the daisy chained cable should be able to carry ~300W which is split to the two 6+2 heads connected to the GPU and offer the same power as 3 different cables. Also in the manual of this PSU there's a schema of how to connect properly the cables in case of a GPU with 3 PCIe connectors,
@siper6492 9 күн бұрын
What’s the difference between the fx and dx?
@bequietofficial 6 күн бұрын
DX comes with the LED stripes in the front - the FX version also features Light Wings as case fans
@siper6492 6 күн бұрын
@ thanks will be buying the fx one then it looks🔥
@bequietofficial 6 күн бұрын
Great choice! 🖤🤓
@normanszappanosDJ 9 күн бұрын
This cpu cooler, good for AM5???
@bequietofficial 6 күн бұрын
Hey, best to use our CPU cooler check to see which of our coolers fit in your system and if overclocking is an option or not: www.bequiet.com/en/cpucoolercheck
@Win_Raf 9 күн бұрын
I wonder, after invert, is possible to install GPU in vertical position. Maybe i'm wrong, but for me is too high for this
@gabexvideos7363 9 күн бұрын
Despite I applied the liquid metal just like in the video It spread on my board. What to do in those cases?
@donutzxxx 7 күн бұрын
Nothing ur motherboard is fried and possible some of ur components
@zombieland9839 10 күн бұрын
Should i b worried about the thermal paste going into the cpu?
@nicolasdepompeya 10 күн бұрын
Ninguno esta bien puesto, y eso que es transparente el acrilico.
@scooba789 10 күн бұрын
My motherboard has 2 x 8 pin CPU connectors, but my System Power 10 has 1 x 8 pin connector and another cable with 2 x 4 pin connectors. Which one am I supposed to use? Am I supposed to use all of them?
@trondeau1981 10 күн бұрын
I use a 3x3 drop in the center works every time for full coverage.