4 ай бұрын
6 ай бұрын
Пікірлер
@clarencebrasse1033 22 сағат бұрын
Why always the line roller issues on this reel.Rinse after fishing.Lube etc .Can you answer me please.
@PeterKerns-b2i Күн бұрын
I just bought a mint condition Penn 704 greenie. I took it apart to degrease all the old grease. Then I reinstalled new grease and put it back together. I noticed that the rotor brake seems a little bit worn. I guess from sitting in the box all those years. But I heard that the 704 can be used just as well without a rubber rotor brake. Should I just throw out the rotor brake and use it without it?
@josearrona3742 2 күн бұрын
Where can I get the bearings?
@shannonedens7854 3 күн бұрын
I have a Slammer IV 2500 that makes this sound. Thanks for the tip!
@johnlov7609 5 күн бұрын
Great video very detailed. The only thing I would like to see is a layout order of each O-ring washer, etc. kind of like a exploded view when you’re laying out the parts as you take them apart.
@TSGReelService 5 күн бұрын
Thanks for watching and the suggestion. I'll try to remember that and apply it. Spread the word about the channel.
@Joemomma2522 6 күн бұрын
Hello, i was hoping you could give me some insight. I noticed on a lot of my older penn reels, when i put the drag on the lowest setting the spool spins almost as if it were in free spool. Except for my 114hlw special senator. At the lowest setting it actually has a good bit of resistance and will not spin at all unless i pull it. Is this normal? Should it have a good bit of drag on the lowest setting?
@TSGReelService 6 күн бұрын
Thanks for checking out the video. Not sure how much drag you have at the star wheel totally backed off, but it's a function of your drag stack height.... HT-100's, metal washers and spacer. If you're only pulling about 2 to 4lbs when it's "wide-open", I wouldn't worry too much about it. If it's more than that, then I would open up to reel to double check all the eared metal washers are set inside the main gear and not riding high. Spread the word about the channel.
@Joemomma2522 5 күн бұрын
@@TSGReelService Oh definitely man you're a wizard. I've disassembled and reassembled the whole reel like 10 times now, cleaning the drag components, replacing them, and arranging them as they should it's still the same. Drag is at about 3-4lbs "wide open" I think I'm going to try to not think about it too much in my dreams 😅 But yeah man I couldn't have done it without your videos
@TSGReelService 5 күн бұрын
@@Joemomma2522 glad to hear my videos are helpful. Yes, you should be fine that amount at wide open. If it's ever an issue for you, you can try removing the tension washer between the spacing sleeve and star drag and seeing how that feels for you. Only issue is that you may sacrifice top end drag pressure.
@guillermotaboada3235 7 күн бұрын
Hi, on min 6.25, there is a small washer you mention not to lose. Is that washer also on the 4000oc models? If it is not there will it prevent the Antireverse from working?
@TSGReelService 6 күн бұрын
Thanks for watching! No, the 4000OC doesn't have the ring you're referring to, but if the post that the ring came off of is missing from your reel, then the A/R won't function properly. If it's still there, then you probably have an A/R (likely rusted or very oily) or A/R lever issue. Spread the word about the channel.
@guillermotaboada3235 6 күн бұрын
@TSGReelService thanks for the response I def will 👍
@TSGReelService 6 күн бұрын
@@guillermotaboada3235 no worries. Thanks!
@mdgeist472 9 күн бұрын
I believe the BG is poular because it is a brute. But like most reels, it comes "dry" out of the box. You have to lube it up to make it last.
@TSGReelService 6 күн бұрын
Thanks for watching and taking the time to share your thoughts. The ORIGINAL series were bulletproof and brutes back in the day, but not these new ones. Being a brute doesn't mean much if you're injured. It's true that a pre-service can be beneficial, especially when catered to one's type of fishing, but the reels are delivered ready to fish. It's more of a design issue, in my opinion. With regular care and service, these are better than the average bear.... just not sure that happens in the real world. It's not just Daiwa, though..... the Spinfisher also experienced a decline in durability for the angler who doesn't take care of it. It's the new way in this "throwaway" world. Here's food for thought.... $200 invested once at 8% APR for 60 years is $20,200.... at 10% (stock market approximate historic average) is $60,000... at 15% APR is 876,600!!!
@antoniojimenez2078 13 күн бұрын
Life saver ! Thank you so much I was able to fix my reel !
@TSGReelService 6 күн бұрын
Excellent! Happy to hear it. Spread the word about the channel.
@Leosfishingstore 14 күн бұрын
this reel have two drag system?, how much drag:? like 33 pounds same as daiwa bg series?
@TSGReelService 6 күн бұрын
Hey Leo.... not sure about the drag level, but it's likely more than you'll ever need. See my other response to you regarding the dog question.
@Leosfishingstore 15 күн бұрын
This reel have a double anti reverse system?
@TSGReelService 6 күн бұрын
Thanks for checking out the video. It has two dogs.
@michaeldiaz9397 16 күн бұрын
I just bought a shimano vanford 4000xg, and it makes an almost scratchy noise when reeling and I was wondering if you knew what may be wrong with it.
@TSGReelService 6 күн бұрын
This may be helpful: kzbin.info/www/bejne/e5u0qatvhaxnp9U Spread the word about the channel.
@ivansoares8410 21 күн бұрын
Ok
@TSGReelService 6 күн бұрын
👍
@semihsemra8612 22 күн бұрын
👍👍👍
@TSGReelService 6 күн бұрын
Thanks! Spread the word about the channel.
@edgardorodriguez7033 23 күн бұрын
Hello brother, I have a question, let's see if you can help me. I have a Penn International 1gen and the spool has corrosion. Do you have any tricks to clean it so that it doesn't come out again? And Merry Christmas !!
@TSGReelService 6 күн бұрын
Thanks for checking out the video. Thanks! Hope you had a good Christmas and New Year! Nothing is 100% effective, but for corrosion, you can start with SaltX (or similar) to remove the majority, then a wire brush if needed, and then use a corrosion inhibitor (see my video description) on it. Spread the word about the channel. Spread the word about the channel.
@Sethgotafishingrod-o7f 23 күн бұрын
Mine is stuck like this too and I am not sure what is happening I have pulled it apart and put it back together a few times and it is making no progress have you got an answer for me?
@TSGReelService 6 күн бұрын
Thanks for checking out the video. Hope you had a good Christmas and New Year. Check the entire length of your shaft and left side plate. Spread the word about the channel.
@lyudmilyankov1611 23 күн бұрын
what year was this zaragosa made i mean the model
@TSGReelService 6 күн бұрын
Thanks for checking out the video. Not sure.
@Valco458 25 күн бұрын
Just subscribed & wanted to wish you a safe and Merry Christmas 🎄. Thank you for sharing your helpful knowledge throughout the year . Bob
@TSGReelService 6 күн бұрын
Thanks so much, Bob!!!! I did. Hope you had an excellent Christmas and New Year also! I'm just getting back on after a little break from KZbin. Spread the word about the channel.
@TSGReelService 6 күн бұрын
Barry
@tonyfleck236 26 күн бұрын
Thanks for the video. I'd like to replace the bail wire. How can I remove the clip holding the bail wire in the bail cam?
@TSGReelService 25 күн бұрын
You're welcome and thanks for checking it out. See min 6:45 of the following video for guidance on how to remove it: kzbin.info/www/bejne/bWGmepeVr8ubga8 Spread the word about the channel.
@tonyfleck236 25 күн бұрын
@@TSGReelService Will do about the channel and thanks for the advice.
@TSGReelService 6 күн бұрын
@@tonyfleck236 you're welcome and thanks again!
@ovidiudraghici9941 27 күн бұрын
You've just proven how poor the design is. Got a 4000 that seized after 4 hours on a boat in Cuba. It may have gotten sprayed once by a wave. Seized essentially from the salty breeze, brand new. This reel is junk for saltwater, err, breeze that is. Get a Spheros for the same price; IPX8, 50% more drag, no brainer.
@TSGReelService 26 күн бұрын
It's a tough one.... however, even the Spheros would need to be regularly serviced, no matter the water intrusion rating. Spread the word about the channel.
@ovidiudraghici9941 23 күн бұрын
@@TSGReelService Thanks for the walk through. I was stuck on removing the shaft till I bumped into your vid. Tried removing the screw that keeps it in place but I ended up striping it.
@TSGReelService 6 күн бұрын
@@ovidiudraghici9941 You're welcome and thanks for watching! Sorry to hear about you stripping the screws, but it should still work. You can use this video for help with a complete breakdown and reassembly: kzbin.info/www/bejne/nYqwfYWYe86blac
@tonyfleck236 28 күн бұрын
I still love this reel. Just did a breakdown and lube with the help of this video. Thanks very much.
@TSGReelService 28 күн бұрын
A nightmare to service if not taken care of, but it's still one of the smoothest reels out there! Thanks for watching! Spread the word about the channel.
@devoker666 Ай бұрын
Hi mate, my ultegra seems to too much free play at the drive gear and making a sanding noise at some positions when cranked fast. I checked everything else and nothing seems wrong Could I fix this by adding a few shims between the gear and the bearings?
@TSGReelService Ай бұрын
Hey brother, thanks for checking out the video. Sorry to hear about the trouble. Thanks for providing specific details on your reel. I need a little more info, or if you could make a quick video that demonstrates your issues and post it to your channel, that would be even better. Prefer via description? 1) was these issues happening before or after you serviced the reel? 2) if before, have you attempted to service the reel before reaching out to me (seems like you may have), or is untouched? 3) Is it lateral or vertical play? 4) is the sanding noise happening under load or just when cranking it in the house? Prefer a one on one? I do video consultations.... email me at [email protected]
@christianbaker5465 Ай бұрын
This video was awesome! However, I ran into a slight issue. The transfer level screw broke off inside the reel! The head of it sheared right off from the rest of the screw. How can I extract this screw from the reel? Any ideas? I don’t want to trash the reel. It still works after full reassembly, but obviously…. I’d like to/need to extract and replace that transfer lever screw
@TSGReelService Ай бұрын
Thanks for watching! Sorry to hear about the troubles. I'm assuming you're referring to part #234 (234-750 transfer lever screw). Neither of what I will propose is 100% guaranteed, but if it fails, you can always remove the "click dog" if you don't want to constantly hear that clicking while you're cranking. You can tap the screw by drilling it out without damaged the threads in the reel frame (drill bit needs to be a smaller diameter. Or, you can use the same drill bit to drill the screw part way, and then use a reverse threaded drill bit to back the screw. Option 2 is safer since there's more "room" for error, but, if you can pull it off, option 1 is more effective. Or, you can just leave everything as-is and fish it if the click dog sound doesn't bother you. All the best with it, whatever you decide.
@jerrymarshall2095 Ай бұрын
Nice work,thanks brotha
@TSGReelService Ай бұрын
You're welcome brah. Thanks for watching. Spread the word about the channel.
@jrod063 Ай бұрын
Hi I was trying to track down one of those bearing packers you use you couldn't point me in the right direction please?
@TSGReelService Ай бұрын
Hi, at what minute in the video?
@thesilentwarrior6769 Ай бұрын
😂 i font even know what you fix .you fidnt say what the issue was and how you fix it
@TSGReelService Ай бұрын
Thanks for watching and sharing. Try rewatching it. If not, I hope you find a way to fix yours. Spread the word about the channel.
@sakirkir7615 Ай бұрын
My 12t always drag onn..can u gift a tips for settle my problem...the drag cannot free
@TSGReelService Ай бұрын
Yup. The 6 and 12's often had drag range issues, but if it was working before, then check your bearings and shaft.... something's probably locked in position. Feel to return the tip favor by using the $thanks button under the video. Spread the word about the channel.
@darlanviniciusmeinerz Ай бұрын
A engrenagem principal é de qual material?
@gecko1406 Ай бұрын
Would removeing the shield from the bearing cause any problems cause i had to remove the bearing shields on my spinfisher vi 10500 cause when tightening the rotor nut the pinion gear would bind on the shields on the lower bearing and cause of that rotor wouldnt spin removing them fixed it but idk and help would be awesome 🙏
@TSGReelService Ай бұрын
Thanks for checking out the video. No, removing the shields don't affect overall functionality. It seems unlikely the PG is interacting with the shields, unless they were damaged, somehow. There's likely something else going on. Try replacing the bearing first. Or, you can take the reel to your local repair shop for assistance. Spread the word about the channel.
@gecko1406 Ай бұрын
@TSGReelService thank your for reply will sub 🙏 i have 1 question if you could help out i would appreciate it .For my spinfisher vi 10500 the parts list diagram online shows a part 19a pinion bushing that goes in between the pinion gear and that ball bearing but on the hard papper parts list that came with reel it shows that it doesn't use part 19a pinion bushing from your experience with the reels you service did they ever have a bushing between the bearing and pinion 🙏
@TSGReelService Ай бұрын
@@gecko1406 thanks for the sub! I don't I've ever seen one without the 19a washer. Is it absolutely necessary.... no.
@christopherjenkins2373 Ай бұрын
Great video, I just got a Daiwa BG 20 today and it is a beauty! I’ve been collecting and restoring these BG reels over the last three months. I have six now and will probably not get anymore given what they cost. I have a BG90, BG60, BG30, BG20 and two BG10 reels. I don’t plan to get the BG13 and BG15. In fact, I can’t even find a BG15 anywhere right now. I like the way you take the reel completely apart. I don’t do that unless I need to which for me is usually 80% of the time. On all the KZbin reel service videos I watch and I watch a lot, yours are the most comprehensive. I just wish I had your hand and finger dexterity (but I’m 70!) I’ve never seen one of your videos where you did not teach me several things I did not know. I have 420 vintage spinning reels in my collection including reels from 17 different countries. Honestly I own more Daiwa reels than any other brand. Most of my vintage spinners are saltwater reels except where I decided to collect the entire series of a certain model. I’ve done that a lot like I did with these BGcreels. For the longest time I could not figure why the BG reels were more popular than the Daiwa GS reels. My favorite vintage Daiwa reels are the 8600 and 8700. They are worm gear reels like a Penn 704 but have three ball bearings. I have all the series plus two bonus 8600s. They were only made for a couple years and predate the sivers, GS, and BG reels. I own complete sets of the silver series and GS series reels, I truly wish you could see my collection. Dennis Kuntzcalls it my museum. My saltwater Mitchell’s reels are extraordinary especially my Mitchell 498 reels. I own seven that include 4 different models. I’m sorry I wrote so much. Again this is a superb video! -- Chris pS. Have a very blessed Christmas season!
@TSGReelService Ай бұрын
Thanks Chris! Glad you found the video enjoyable. By the sounds of it, I think museum is very fitting, considering the number of reels in your collection. Thanks for taking the time to share. Merry Christmas!!! Spread the word about the channel. Barry
@serdnocuco1 Ай бұрын
Esse é um bom equipamento? Qual a finalidade? Parece ser para uma pescaria muito específica. Tenho acesso a um mas não sei se serve para isca artificiais, ou jigs, ou pesca de espera.
@momenfarid573 Ай бұрын
I want to communicate with you
@momenfarid573 Ай бұрын
I want to communicate with you
@luislopez7186 Ай бұрын
This looks like exactly my issue. I did not know that was a bearing. Thanks I appreciate the vid!
@TSGReelService Ай бұрын
You're welcome and thanks for watching! All the best with the repair. Spread the word about the channel.
@JunkiesFishing Ай бұрын
Yo, What is the main gear made of?
@TSGReelService Ай бұрын
Thanks for checking out the video. Yes. Spread the word about the channel.
@sunilramnath9660 Ай бұрын
Great video. Thank you. Can you tell how much drag this reel has?
@TSGReelService Ай бұрын
Thanks! Probably in the neighborhood of 15 to 25lbs at strike. Spread the word about the channel.
@Leosfishingstore Ай бұрын
How much drag did you think that Monster have?
@TSGReelService Ай бұрын
Thanks for checking out the video. Probably around 10 to 15lbs.... which is more than enough for most fish.
@mikec2173 Ай бұрын
Thank You for posting. I have 2 Quantum Smoke "Speed Freak" spin reels SL50 XPTiA. I disassembled them to lubricate and check the bearings. When reassembling, I found that trying to tighten the bearing cap caused the reel to bind. The tighter the cap, the worse the binding. All the bearings are fine and the reels spin freely with the bearing caps just below finger tight. Can you comment?
@TSGReelService Ай бұрын
Answered wrong question previously.... my apologies. You're welcome and thanks for checking it out. To confirm we're on the same page, you can post a video on your channel demonstrating the exact steps you're taking with the cap and stack beneath... you may have replaced the stack incorrectly, maybe too much grease somewhere at the top... not really sure what steps you took, but you can try checking those. That being said, if the cap is snug, you should be fine. Spread the word about the channel.
@mikec2173 Ай бұрын
@@TSGReelService Thanks. I dont have a channel to post to. I did follow the schematic .jpg available online to reassembled the bearing stack. Perhaps the original factory pressing of the bearings is deeper than my manual effort. I disassembled/reassembled multiple times on both my reels. Tightening bearing cap grinds both reels. So I have left the bearing caps tightened to a degree way lower than the original factory setting, where I had to use your teflon tape method to loosen them for the disassembly. It could be the thickness of the grease I used, and I will retighten the caps after a good session of use. If they still grind I can loosen the cap and use Loctite. Or I can buy better grease. I use these speed freaks for high speed spinning of Australian pelagics from tuna to narrow-barred spanish mackerel. Marvellous little reels
@TSGReelService Ай бұрын
@@mikec2173 Sounds like a plan. Enjoy them!
@tonytony8 Ай бұрын
Great video! Helped me a ton!
@TSGReelService Ай бұрын
Thanks! Happy to hear it! Appreciate you taking the time to leave a comment. Spread the word about the channel.
@rambojones8711 Ай бұрын
Hello i just got done doing a service on my osprey 2500 but when puttjng back together my screws that hold in bail arnt tightening. Did i somehow mess both the threads? ...wasnt ruff on it so idk how this happened
@TSGReelService Ай бұрын
It may just be the wrong screw. Sometimes, they can be mixed up during reassembly. Take stock of all your external screws to see if anything sticks out when you look at them. Otherwise, I would try reaching out to FFP.... they posted a comment somewhere in the thread of this video.
@K_P236 Ай бұрын
Saved me from a bricked reel..
@TSGReelService Ай бұрын
Excellent! Thanks for taking the time to share. Spread the word about the channel.
@lg.1033 Ай бұрын
Hey brother where can i buy parts for this reel plz help
@TSGReelService Ай бұрын
Check out the video description and/or my community page. Spread the word about the channel.
@_N4te_ Ай бұрын
What ultrasonic do you use? Also do you have any experience with corrosion x grease?
@TSGReelService Ай бұрын
Thanks for checking out the video. Check out the video description for help. The CX grease is a bit too sticky for my taste, but it doesn't mean I would never use it. List of greases I prefer to use.... Penn, Cal's, Shimano. Spread the word about the channel.
@JeffreySmith-m3y Ай бұрын
Once the pins come out i quit and buy a new one
@TSGReelService Ай бұрын
🙂 thanks for taking the time to watch and post a comment. Spread the word about the channel.
@John_the_anglerr Ай бұрын
Hey brother I saw that you also worked on the Penn wrath 5000, would you know if the ball bearing in the wrath 5000 would fit in the battle 6000? I took my battle out one trip, rinsed it off I think with too much water and it squeaks now when I crank it and I the only thing I think it can be is the bearing.
@TSGReelService Ай бұрын
Not much, brother. Happy to answer, but not specific info for your question, though. Which Battle (i, ii, iii, etc), which wrath (i, ii)? Which bearing? Pinion, right/left side bearing, etc.
@Hendr5 Ай бұрын
Hey there. Thanks for your video, very informative. I bought a second hand Saragosa 10000F. (A hand down from original user, so I can't speak to him). When reeling, the spool doesn't move up/down. What could be wrong? And do you use any SW40 lubricant on your reels? Thank you. Paul- South Africa
@TSGReelService Ай бұрын
Hey Paul. Thanks! Good description of your specific reel and issue. Likely the pawl is the issue. You can use my community page for help sourcing it, if you need. Regarding the SW40, not sure what that is, sorry. Feel free to check the video description for items I use and places to get them. Spread the word about the channel. Barry
@gungadinn Ай бұрын
It appears that the same Shimano engineers that got the company sued for bicycle crank sets breaking and injuring hundreds of riders, have been moved over to the fishing reel group. Anything to save a gram of weight.
@TSGReelService Ай бұрын
🙂 thanks for watching and taking the time to comment.
@jamesgarland4990 Ай бұрын
Hey thanks for this video! It helped me repair my Diawa CG1000RD, which is a smaller but very similar reel.
@TSGReelService Ай бұрын
You're welcome and thanks for watching! Glad to hear it helped. Spread the word about the channel.
@jasonlopez4855 Ай бұрын
My reel is a real GX2 it doesn't say Shakespeare logo on it only GX2 markings. And my rods don't have the Shakespeare logo. What is better.
@TSGReelService Ай бұрын
Thanks for checking out the video. The one you have is better, since you already have it.... nothing else to purchase. Spread the word about the channel.
@ianb4801 Ай бұрын
Hooray! Oil on that anti-reverse bearing instead of a glob of grease!
@TSGReelService Ай бұрын
Thanks for watching and taking the time to comment. Spread the word about the channel.