We certainly need safety with guns but if a person's eyes are that bad they should stick their finger in the barrel after looking to see it's clear, then they dont need to be handling a gun. Can also say there is no use in looking down the barrel to see if its clear when youre just going to stick your finger in it anyways

Im having issues with my bolt not catching the round when chambering another round. I have the mid SA (4-5 rounds) chambered in a 6.5 creedmore. My bolt is unable to catch rounds 3-5, what is the issue here? What do you recommend?

try a 223 aic case

@1:03 keep your finger off the trigger until your sights are aligned and you’ve made the decision to shoot

Are all barrels threaded for suppressor use?

He did as he should I wanted to know about the tighten and the side screws so I can adjust the triger pull

Will this work on a Remington 700 Sendero SF2 with the HS Precision stock?

Tatum Lodge

I've shot that range before with ny grandpa. That's awesome!

He sure made 65 lbs look easy

1:21 While I already knew that the stock on my .270 is too long, I can barely bend my arm to 90° with the stock like that. Does length of pull affect how much recoil you feel? My 12 gauge fits me better and I can handle the recoil, but my .270 packs a punch.

I’m seriously considering one of these in 30-06 as I’ve always found the ‘06 to be a great choice!

Git one. Doesnt fit. What do i do about it. Fits my stock (after major inleting) but the mag hits the "upper" idk what to call it but its right infront of the trigger assembly. Mag hits it, wont lock in place.

will this fit in a r700 vtr

My length of pool is about 19 feet 😂

I need a stock like this for a Winchester model 70 7 mm WSM how can i go about purchasing one without getting the wrong one

$369 for bottom metal and a mag? holy highway robbery, batman.

Thank you Sir

That weight question that I asked is for a short action.

What is the weight of your VAR with a 24 inch barrel and a 26 inch barrel?

You guys really need to build a hybrid tactical/hunter stock. As a rifle builder and LE Officer, it would be advantageous to have a tactical rifle stock with some hunting rifle features. If you were to add the adjustable butt and check piece from your PST025 and add it to your SPR, bingo! There is currently no manufacturer doing this. From an operational standpoint a compact and light as possible stocked gun will be lighter and easier to shoot from unsupported positions, so there is no need for beaver tail forends and palm swells, which add this weight and extra dimensions. For support, most will use a bipod, tripod, or Arca setup anyway. I’d be more than happy to test a prototype. Thank you for building quality products!

Does the varmint barrel fit without modification?

Can this be used on a .270 ADL Mtn Rifle with the 700 DMB

will the PST006 - Remington 700 BDL Short Action Rifle Stock fit a .308 sps varmint?

I really enjoy my HS 6.5 creedmoor in the model 7 from Remington. Keep up the great work!

My bolt handle rubs a little in the inlet is this normal on a rem 700 I was told by a gun smith just to sand it out a little

If I were remington I would save my customers the headache and sell them a rifle with HS Stock.

I am interested in a chassis style stock for the HTR, Can that be made available. Is there a reason you don't offer this style of stock?

The NRL website really sucks. It's virtually impossible to find the information you seek.

Would the PST011 fit on a .300 win mag sps?

Do you guys have anything for adjusting the feed lips on a SKS magazine and how to fit it to the rifle? I recently bought one in a private sale through a mutual friend and the magazine that came with it isn't feeding. The lips have to be open to far since the rounds will occasionally pop out while loading it. And it's a double stacked magazine and appear to be feeding off till the side of the chamber. Not to mention the tip of the round isn't angled up to feed into the chamber and instead strikes the flat surface below and off to the side causing it to stop rather than being angled toward the chamber so the tip of the Round can assist in feeding it into the chamber. It's an old magazine and my buddy admitted to opening the feed lips and just eyeballing it. Before I go making any adjustments I would like to get the specs and hopefully an adjustment tool that was actually created to do the job instead of a flat head screwdriver like he used. Also from what I can find new magazines have to be fitted to the gun and since there are so many different manufacturers and many coming from China that there are slight variations making it impossible to manufacturer a direct fit replacement. I'm hoping that means simply filing a little of the edges, rounding them a little and something like that and not adjusting the feed lips etc. I mean the chamber sits in the center above the magazine so it makes sense that the round should be angled up and feed be stripped of the mag from the center in an upwards motion towards the chamber. The one I have the lips are separated wider than a round and I'm not even sure what keeps them from just all popping out of the mag when I take my thumb off the top they fit in there so loosely due to the unprofessional adjustment and lack of due care. And from someone who is generally very good at fixing guns and components. He has fixed several of mine and we have built several together. Apparently he needs to rethink his approach to magazines.

Is it compatible with AICS magazines?

That was awesome shooting. The movement of gases out of your muzzle spoke to how bad the wind conditions were. I have not seen a torture test on youtube that challenging on any other rifle.

The price is insanely high.

U have a very great product. I've got alot of your stock. I think about a dozen. Your customers service is stellar. I have got one stock I bought on a 300 win mag sendero rifle. Bought it used. Looks like a chip around the sling holder. I'm going to send it to u. Hopefully u can fix it. Thanks again. Awsome video.

Lets build some RIFLES!!!

Does anyone know how thick the stock needs to be?

Excellent explanation

that damn chevy suburban in the back ground got me stuck....

Hey..... I know that guy! boomshakalchashhabang🤣🤣🤣🤣

Why do you begin by telling us how tall you are when a person’s LOP is more closely related to arm length than height?

I got a Remington 700 SA BDL with a beautiful HS Precision stock in 270WSM. I currently load the rifle from the top but want to convert it to a detachable magazine. I'm going to order your Detachable Magazine Assembly Convertion Kit with the mediam and high capacity magazine and hopefully it will fit perfectly without the need a gunsmith o mayor adjustments.

No filing or sanding on the stock around the action screw area? I have a 1992 HS Precision Remington 700 PSS stock, will it work?

Why they went with coloured dots and not numbers is beyond my capacity to understand. I think I’m just a dummy, actually, plus I’m colour blind. Definitely someone far smarter than me came up with the idea that coloured dots are more meaningful than silly numbers like 2,3,4,5… Numbers are just part of the patriarchy… they say… Because I’m not smart enough for a swanky swarovski… I think I will have to get a Leupold VX-5HD with the CDS turret… Its way less sophisticated in that the turret has numbers that actually mean something… and lines at each click… which is for dolts like me. Plus I don’t have any matching accessories like a watch with no numbers or ticks or a fretless base guitar.

Do y’all make any stocks for savage 110 ultralite short action

Do you build a model around the .22hornet cartridge?

What Tripod is that in the Video

Will this work on a 700 sps tactical with the hogue overmolded stock? Thx

Will these work with an older Rem 700 internal magazine ?

Why are smaller calibers more accurate?