Alejandro Martinez

Пікірлер

@TS_Tasteless 10 күн бұрын

My yukon xl 2500 is 8 lug. The brakes gonna be different for me?

@Alejandromtz20 10 күн бұрын

I’ve not worked on any 2500 besides my 2013 Silverado. It will be a similar process. The best thing about GM products is they don’t change a whole lot. You could watch a video on a Silverado 2500 since the Yukon and suburbans are on truck chassis.

@MrFullcount13 13 күн бұрын

Great video! I have a 2005 Sport trac and probably need to do this for mine as well. Have you tackled changing the rubber body bushings that are between the body and frame of the vehicle? Mine are pretty much dust and I just assumed since yours was around the same age, yours were too. I watched a video on changing those and tried but couldn't get the first bolt out. I think it's really effecting the ride and suspension of the vehicle. Thanks again!

@Alejandromtz20 13 күн бұрын

@@MrFullcount13 I have done mine. I used prothane ones from Amazon. Look up munnday 86. I used his video on how to replace them. Just heat those bolts up and take an impact wrench to the bolt and they come right out. The locktight from the factory is a pain but the heat works well.

@stevenlittle8317 13 күн бұрын

@@Alejandromtz20 ⁠I’ll definitely look those up! Did it help the ride out a whole lot to replace them?

@Alejandromtz20 13 күн бұрын

Yes, it was a night and day difference! I actually too both front seats out to have more room in the cab.

@stevenlittle8317 13 күн бұрын

@@Alejandromtz20 Awesome! I’m going to have to try that! Have you by any chance had any issues with your dash cluster? There seems to be a short somewhere in mine. All the gauges stopped working but every now and then I’ll hit a bump and they start back. 😒

@Alejandromtz20 11 күн бұрын

@@stevenlittle8317 yes, I got mine with 170k and around 240k miles it started acting up. I just left it as is since I use a mileage tracker for work I just fill up every 300 miles or so. I think I looked up a company called circuit board medics that would rebuild the cluster for a pretty fair price. Just have to ship it to them and they ship it back.

@mikes6252 28 күн бұрын

Waste of my time

@vibinwithvince6579 Ай бұрын

RIP rubber gloves 🙏

@jasonbaker8325 Ай бұрын

This video is trash, dude says he'll show you and the actual work isn't shown

@Alejandromtz20 Ай бұрын

Thanks for your comment 😂

@JR-kr1lv Ай бұрын

Can't follow when it's off already, how ? I understand with kids and all, maybe don't make KZbin video if can't, I always helped my family to, no money and they thank you then, but later, they just screw you over on something, I can't even watch this, I have to watch another KZbin video to figure out. Thanks for trying!!! Also on 10mm bolts at bottom of bumper, well if hit a curb in parking lots, it catches it and loosen it up, i know because it happened to mine, then ran over bolt causing tire o trip light on dash for TPMS, each side has that plus the door i think in order to change light bulb if needed. It helps keep that door closed, I almost bought the kit to add Fog Lights. I ended watching at 6:30 seconds, gonna show people, then show each piece, i seen another video just almost 7 minutes, he didn't put back together. But I found out how to take bumper off, also another push clip inner well, that's to hold bumper up tight to top piece. Never showed that, I sen many with missing parts/bolts, to me, i looked at many, and out of 9, almost each 1 was missing 1 if those bolts. Most was EX-L which stands for leather. And different center console. Rest is extra. Also you must make sure its from Japan if not, then America built, parts are a bit different on some things. So to all, check if what ever fixing. Just make sure its correct, just like looking at lights before ripping apart, nothing broke, then match up to see if all the same. Best of luck

@adamwilburn6253 Ай бұрын

I cant find the brackets that bolt to the 4 holes to the bed. Do you have a link to those?

@Alejandromtz20 Ай бұрын

@adamwulburn6253 they were included in the kit. If you order the cover then I’m sure you can call and have them send you some.

@williammurray7499 Ай бұрын

I dug and put inspection pit in garage 12 feetlongx44 inches wide (lots of rebar)

@karditzas 2 ай бұрын

This was exactly what I needed. Great job!

@wiseGuy255 3 ай бұрын

Go get a breaker bar

@AndreaDanforth-gc6lr 5 ай бұрын

I didn’t need the tool tips. I needed to see putting the brake pads on which you skipped because you had trouble. Change the name of the video if you are going to do and talk about different projects than the one listed

@Alejandromtz20 5 ай бұрын

Skip to 15:27 and you can clearly see me putting brake pads on. Maybe don’t skip through video and watch it through. Also just for future reference everything goes back on the way it comes off.

@richardtrahan2659 5 ай бұрын

Part # on bedcover please?

@Alejandromtz20 5 ай бұрын

shockerhitch.com/product/gooseneck-rollup-tonneau-cover/v/Ford/Explorer%20Sport%20Trac/2004/

@JoseMedina-mh6qw 6 ай бұрын

Ya vi el link donde lo compraste.

@JoseMedina-mh6qw 6 ай бұрын

Te felicito muy buena demonstracion. Donde compraste el cover?

@Alejandromtz20 5 ай бұрын

shockerhitch.com/product/gooseneck-rollup-tonneau-cover/v/Ford/Explorer%20Sport%20Trac/2004/

@monstrositygarage 8 ай бұрын

The "teeth" that the pcv valve threads onto in the valve cover on my explorer have broken off previously. How would I keep it in without those locking teeth?

@Alejandromtz20 8 ай бұрын

Honestly the right way would be to replace the valve cover since the threads are built into the valve cover. The quick and dirty way to do it would be to put some oil resistant rtv on the new valve near the oring and push it into the hole in the valve cover and let it fully dry. Once it’s dry then put it all back together. This should work for a while at least until it can be fixed properly.

@joemartinez6182 Жыл бұрын

watching your video sure helped in replacing the pvc valve on my ranger, thanks.

@Alejandromtz20 Жыл бұрын

Glad it helped! That’s why I make these videos!

@cjrivera04 Жыл бұрын

Do they not make this cover anymore? I heard red headed rebel and the link takes me to shocker hitch. Looking for a cover as well.

@Alejandromtz20 Жыл бұрын

Thanks for letting me know. I’ll have to take the link down. I went directly to the website and I looks like they are only selling shocker hitch products. Go to that website and go to towing accessories, then go to gooseneck roll up tonneau cover. After that type in your vehicle info and it should come up. I’ll up date the link as well shockerhitch.com/product/gooseneck-rollup-tonneau-cover/v/Ford/Explorer%20Sport%20Trac/2004/

@marcusglover9639 Жыл бұрын

Did this fix your idle issues

@Alejandromtz20 Жыл бұрын

Yes it did fix my idle issues and the light smoking from the tailpipe.

@JSTX9216 Жыл бұрын

Thanks for the tip on the tools there. That will come in very handy for later to get this done.

@Alejandromtz20 Жыл бұрын

Thanks for watching! I hope it helped!

@musicchaos7342 Жыл бұрын

Which go pro do you have?

@Alejandromtz20 Жыл бұрын

I’m using the hero 8 black. That’s what I fill all my videos with.

@punam_hansda Жыл бұрын

Bs lge rho😎 Apki kosis ek din Kamyabi me jrur bdlegi

@hondaslave-kd6hi Жыл бұрын

Nice in depth video. I always use motorcraft filter, anti drain valve, very important on these engines because they're dependent on oil pressure for the timing components. Thanks

@Alejandromtz20 Жыл бұрын

I usually do to but they have become harder to find around me. I ordered one on Amazon and compared it to one I had on hand and there were enough differences between the two that I don’t order any oil filters online.

@hondaslave-kd6hi Жыл бұрын

@@Alejandromtz20 I ordered by the case on RockAuto come out to be little bit more than $3. Probably change though nowadays that was a couple years. Thanks for your video it was very helpful.

@marcorosas4198 Ай бұрын

Great videos I have a sport Trac also. And I need some recommendations on getting the spark plugs changed. There is two that are very difficult to do.

@Alejandromtz20 Ай бұрын

If your talking about the back 2 spark plugs no the passenger side then you have to go in through the wheel well. No other way that I found to do them. Hopefully you figure it out. Just take the wheel off and use a universal joint adapter to get in there.

@marcorosas4198 Ай бұрын

@@Alejandromtz20 that's the ones I'm talking about. Wish they would of done those too a little easier to do then having to take the wheel off. Thank you very much for your reply. Be blessed 🙏

@ss2link Жыл бұрын

Nice! Doing my rears soon in my 03 extended cab.

@Alejandromtz20 Жыл бұрын

Thanks man! Hope it helps.

@shawner8 2 жыл бұрын

I have the exact same 2004 Sport Trac. I've been having a hard time finding a tonneau cover that fits. Which model/brand tonneau cover is this exactly?

@Alejandromtz20 2 жыл бұрын

It’s from red headed rebel. It’s the only tonneau cover they have for the sport trac. It’s been holding up pretty good for the last few months I’ve had it.

@shawner8 2 жыл бұрын

@@Alejandromtz20 Thank you very much!!!!!

@shawner8 2 жыл бұрын

@@Alejandromtz20 Do you recommend this tonneau cover? Has it held up well for you?

@Alejandromtz20 2 жыл бұрын

Yes, I’ve had it on for about 4 months and has held up well so far. Definitely try to get the foam on the side rails to meet flush with the bed sides or water will probably get in. I keep all my power tools in the bed of my truck and trust they won’t get wet.

@FranciscoLopez-ef5ey Жыл бұрын

Dónde puedo conseguir esa cubierta .???