How to replace brakes on a 2000-2006 Yukon XL (Tahoe, Suburban,Silverado)

Welcome back to the channel! On this video I'm replacing the brakes on my parents 2005 GMC Yukon XL. This installation should be the same for most of your NBS GM trucks (1999-2006) this includes Chevy Silverado, Tahoes, and the GMC sierra and Yukons. This installation may differ for the 2500 or 3/4 ton or 1 ton trucks but would be a similar process.
Links down below for everything I used in the video and other useful tools for the job.
Dayton 3 ton jack: www.harborfreight.com/3-ton-p...
Home depot M12 ratchet: www.homedepot.com/p/Milwaukee...
Amazon M12 ratchet: a.co/d/hVSmXiI
Lisle caliper piston tool: a.co/d/2ItfEH4
Caliper hooks: a.co/d/dJfP3sZ
Lexivon Torx bit set: a.co/d/aH8uTtc
Lexivon Hex bit set: a.co/d/7ojT4KC
Venom steel wipes: a.co/d/63MOoD4
Venom steel gloves: a.co/d/8OVByNQ
Scott shop towels: a.co/d/iizE2bp
Lucas brake parts cleaner: a.co/d/cufNuuJ

[@JSTX9216]

Thanks for the tip on the tools there. That will come in very handy for later to get this done.

[@Alejandromtz20]

Thanks for watching! I hope it helped!

[@ss2link]

Nice! Doing my rears soon in my 03 extended cab.

[@Alejandromtz20]

Thanks man! Hope it helps.

[@wiseGuy255]

Go get a breaker bar

[@AndreaDanforth-gc6lr]

I didn’t need the tool tips. I needed to see putting the brake pads on which you skipped because you had trouble. Change the name of the video if you are going to do and talk about different projects than the one listed

[@Alejandromtz20]

Skip to 15:27 and you can clearly see me putting brake pads on. Maybe don’t skip through video and watch it through. Also just for future reference everything goes back on the way it comes off.