Northeastern Dirt and Property Maintenance

Пікірлер

@timchambers9775 2 сағат бұрын

85 k in north west NC

@gregpace4676 3 күн бұрын

6 minuets of absolute BS repeating that the Kobota is better without showing us anything.I can't listen to your BS

@northeasterndirtandpropert7974 2 күн бұрын

Well,besides being extremely sensetive and hugely butt hurt,the facts are in the KIOTI manual,so you have to contact the engineers and tell them there full of shit.I can't help the facts,there just there.Do your research,Also make sure you like and subscribe,I invite all kinds.

@sudsnsoda4397 5 күн бұрын

On my previous JD 3720 Cab, and my current JD 3046R Cab… I have a selector at the base of my joystick. It can Lock the joystick. It can make it 4 direction only… and it can make it regen-hydraulics. So I always keep the selector on Regen. The bucket is kind of gravity assisted in its dump routine while this function is selected. Do you have a lock switch on the base of yours? It’s an easy thing to not even notice on mine…. But if you do, it may help. So my will do these mixed motions with ease as well.

@northeasterndirtandpropert7974 5 күн бұрын

No regen that I am aware of.4 pressure and 1 float function.As it stated in the KIOTI manual,its not designed for an efficient 2 function system.It will do it,but its a struggle and its slow.Thanks for watching

@mylifebymusic 6 күн бұрын

first snow and things are already getting cagey around there!

@MyLife109-is4hh 8 күн бұрын

I have a Kioti CK4010SE just made a warranty issue video yesterday may put it up soon. The 3pt lift Hydraulic valve failed with only 220 Hrs on the tractor and was still within the time limit of the warranty. Kioti did not cover this repair. The proble was the 3 pt lift would surge up and down with any load on it. After the vale was replaced, it worked fine. You can click on the icon to see more details on this

@beautifullogger2614 8 күн бұрын

The difference could be a couple things, the Kubota could have a more advanced Hydraulic system with a sort of load sense (more expensive, more expensive to maintain) or it could be in the profile of the hydraulic spool of the joystick... An ubrupt edge on the spool profile creates an on/off action where as a notched or angle profile allows for a smooth transition or blending. Im curious if kioti will pickup on this and get it improved for future models.

@gregwanner2543 16 күн бұрын

My old JD wouldn’t do 2 functions either. Not a big deal.

@northeasterndirtandpropert7974 15 күн бұрын

Well,look at the comments,there's some unhappy KIOTI owners in denial out there.Meanwhile,they make a nice product,i just showed what I did'nt like.

@GIANTDIGGER 16 күн бұрын

I love this machine so much, it can help us a lot

@mattparr995 17 күн бұрын

I love your setup, and great videos! I am looking at and ASV RC30 with 1500hrs on it, if you have any advice about it, your experience and knowledge would be much appreciated!,keep the good work and videos coming! Matt from Amherstburg

@northeasterndirtandpropert7974 17 күн бұрын

My advice would be,be very careful at the purchase of an older ASV.The rubber idlers and undercarriage is very prone to wear if not taken care of.There just downright expensive to rebuild and the undercarriage life will not match a cast idler style undercarriage.They ride great,go thru a lot of soft ground,but really need undercarriage care.You may want to look at the GEHL's at home depot,RT 105,even an older bobcat in the smaller machines.Also,the older ASV's dont have the ungraded front and rear idlers,that do most of the work,they were a failure point.Don't buy just on price point,sometimes it pays to just get a bit more money and a more solid purchase.All my experience in life.Thanks for watching.

@jeffmayeux1692 17 күн бұрын

Wow! That required a lot of work. So nice and organized.

@northeasterndirtandpropert7974 17 күн бұрын

yes,allows access to attachments without moving other items,thanks for watching.

@countyofficer 17 күн бұрын

Are you going to build a sea can car port?? Looks like the perfect spot to do so!!!

@northeasterndirtandpropert7974 17 күн бұрын

I really don't know yet,we'll see what happens next year.

@mylifebymusic 18 күн бұрын

Wow I can’t believe someone would give totes away. Great use of them. Keep the videos coming!

@northeasterndirtandpropert7974 18 күн бұрын

Trust me,it will come with a price.Nothing free is ever easy.

@dalepete2854 18 күн бұрын

First time viewer yes I did subscribe. I feel the pain on the Chinese carburetor.

@jimarcher7665 20 күн бұрын

you didnt curl the Kubota back you only dumped, come on man

@northeasterndirtandpropert7974 19 күн бұрын

Showing the true facts between KIOTI and KUBOTA,and presenting from KIOTI manual as they engineered it.You don't have to like it,any operator whose honest will notice the difference right away.

@jimarcher7665 19 күн бұрын

@@northeasterndirtandpropert7974 but you didnt operate them the same

@user-mm4je1sb9b 21 күн бұрын

Big difference…excellent video

@northeasterndirtandpropert7974 20 күн бұрын

Its a difference thats easily overcome.I just showed it based on facts.kioti owners still think im full of shite.Both are good,kubota excels in the area of hydraulics.Thanks for watching.

@michaelhrivnak1719 28 күн бұрын

Great bike! Great video. Tasteful accessories. Any concerns with the dreaded do-hickey, or thermo bob? Love the EFI, lower seat, large gas tank. I'm getting ready to go out the door to look at one (again!) now. Enjoy the ride!

@northeasterndirtandpropert7974 20 күн бұрын

I am somewhat concerned and may dive deeper into the issue in the off season.Thanks for watching.

@reallythough4591 Ай бұрын

It takes some getting used to, but i just got my ck2620hst with backhoe, and its so much better suited for lifting heavier trees when they fall. Lifted a full red cedar overhead to move to the back, and biggest issue was getting it to the back as i couldnt clear the trees in the driveway. Ended up carrying it to the road and driving down embankment to drop over fence on side thats cleared off fence. Machine is an absolute beast.

@northeasterndirtandpropert7974 Ай бұрын

I agree.Its all about the feeling of the controls.Kioti makes a nice tractor.Thanks for watching

@reallythough4591 Ай бұрын

Way to start with an eww! Had to show the dodge, didn't you? Love the vid, dodge the ram.

@northeasterndirtandpropert7974 Ай бұрын

When you get a diesel,that holds together like a old school cummins,bring it up here.we'll do a test.I don't discriminate.The only other diesel that will run with it,7.3 powerstroke.Thanks for commenting.You must not own a KIOTI,your not whining

@TinCanCampers Ай бұрын

Cool collection I just got a 91 ski doo tundra that is exactly like the bravo

@Peter-od7op Ай бұрын

Coyote is a better deal

@northeasterndirtandpropert7974 Ай бұрын

Certainly is,if all your looking at is price.

@christhomas9837 Ай бұрын

Both the Ford and Dodge would be rare finds and worth a pretty penny. I had a 1998 Dodge dually but I thought it was a 12 valve.

@mylifebymusic Ай бұрын

Nice neighbourly find. Now all you need is a coverall between two 40ft containers for parts storage.

@northeasterndirtandpropert7974 Ай бұрын

You never know what lies ahead.

@ryanc7929 Ай бұрын

Awesome find brother! Let me know if you decide you want to sell the front bumper. I've been looking for one.

@northeasterndirtandpropert7974 Ай бұрын

If you are within driving distance come and get it.Thanks for watching

@ryanc7929 Ай бұрын

@northeasterndirtandpropert7974 Man, thats awesome of you but I'm down in the states unfortunately 😕

@ronaldphelps2085 Ай бұрын

WTF talk talk talk

@northeasterndirtandpropert7974 Ай бұрын

Don't whine.just change the channel.

@johnnywishbone1349 Ай бұрын

I’m looking to do mostly front end loader work so may go with Kubota and hydrostatic transmission

@Vermont_EarthWork Ай бұрын

I have two major complaints on the hydraulics on my Kioti DK6020 is the 3 pt hitch lift speed. My Kubota had a slow speed for small adjustments up with the 3 point arms, the Kioti jumps and shakes the whole tractor when trying to make a small lift adjustment. It drive me crazy. The biggest issue though, and Kioti is trying to fix it is the introduction of air and as a result, cavitation. In the pump. The loader jumps as it's lifting heavy loads and when it's gets really hot gets really bad. My tractor had a first of a kind experimental electric fees pump installed on the suction side of the pump and it has made a big improvement but when I work the tractor hard, like brush hogging or a lot of grapple work, it still shudders. It's a known issue and drives me crazy. There are a lot of little things I don't like on the new Kioti too. Cheap designs that just shouldn't be there. For instance the 3 point hitch lowering adjustable hard stop. It's so cheap that even when I use pliers to try and tighten the screw it still will move if you put any force on the handle when lowering the arms. I bought this because the price was less than the comparable Kubota but I'm now wishing I had stayed with what I knew was a good product and paid the extra money. It's a typical case of you get what you pay for.

@northeasterndirtandpropert7974 Ай бұрын

I'm pretty satisfied with the features of the KIOTI,but,as stated my biggest complaint is the multi-function sweetspot on the loader control.It always amazes me the number of people who never ran a KUBOTA but still have an opinion on the issue because they bought a KIOTI.There both good tractors,one just has more advanced and refined hydraulics.Thanks for watching.

@reallythough4591 29 күн бұрын

@@Vermont_EarthWork turn down the rpm. Put it in neutral and throttle down. I work with large equipment everyday. When using an 80ft boom extension on a Lull, I put down stabilizers and throttle up to lift faster. Same on my kioti. If I want to go slower, lower rpm, pump will move slower.

@Vermont_EarthWork 29 күн бұрын

@@reallythough4591 I have tried throttling down and it makes little to no difference on the lift on the 3 point issue. It’s just a cheap tractor and to get the tractors lower in price there are things it won’t be able to do as well as the more expensive ones. If you only put 50 hours a year on your tractor its not a big deal but if you use it as much as I do, spending the extra money to get the performance and refinement is well worth that extra cost in my opinion. Kioti just installed a larger electric pump on the suction side of my main pump in hopes it will fix the cavitation issue. I’ll never know as now that the latest fix is in place I am selling it and going back to Kubota and not deal with these cheap tractors ever again.

@reallythough4591 28 күн бұрын

@Vermont_EarthWork good luck with that. Cavitation is caused by a couple of issues. Clogged filtration, or dead heading, or air in the system. If it's leaking, fix it. If not, and filter is clean, lift less, it's still more than Kubota in capacity. I got 7.5 hours in this week, and that's after working 65+ hours and rebuilding fence, taking care of girl who had chainsaw mishap, etc... I checked Kubota and Mahindra, but for my needs, kioti has worked well. Just got off an 80ft Loll, and the caterpillar hydraulics are smoother, but not so much to justify the the 130k price tag, and kioti makes bobcat, so it's preference and patience.

@Vermont_EarthWork 28 күн бұрын

@ the problem is Kioti hasn't been able to fix it. Now more and more of them are having the same problem. It's not a simple problem and they haven't identified root cause but have installed a kit on a few, including mine, which has an electric pump that is installed on the suction side of the main pump. This pump is supposed to prevent air from entering the main pump. I'm not comfortable with this as a solution as it's not fixing the root cause. Only minimizing the symptoms. I have had 3 Kubota tractors over the last 4 decades and never had any problems with any of them. That's just my experience but that is enough for me to stay with I have had the best luck operating. There are also many things on the Kioti that are sub par and don't work well. You get what you pay for I guess. I'm glad you like your Kioti but it's just not up to my standards.

@PhilemonMortimer-q6o Ай бұрын

Gonzalez Betty Moore Daniel Anderson Karen

@OBravo24 2 ай бұрын

Could you please post link to whereuou purchase your oil

@northeasterndirtandpropert7974 Ай бұрын

Kimpex oil,also available in Synthetic,wet clutch.Amazon

@leeinwis 2 ай бұрын

The Pig, shorty version .

@brycetoups6431 2 ай бұрын

Why would you try to do that kind of work at 1800 RMP?????

@northeasterndirtandpropert7974 2 ай бұрын

Because I match the job to the machine.No need to scream a diesel needlessly,contrary to the commentors opinions.premature wear on oil,engine.No need to lug it,but no need to scream it either.KUBOTA hydraulics work just fine at 1800 RPM,what KIOTI does in the engineering end is lacking,RPM aint gonna change how oil flows thru an orifice in a manifold,just make it more jumpy.KIOTI needs to design there flow path more effectively in there system,not try to create high flow thru RPM,thats not gonna change anything.look into it.Its all about oil passage.KIOTI ,unless they redesign,will NEVER match KUBOTA hydraulics.BUT,the tractor works just fine if you are not put off by this.Some guys just get butt hurt when the facts come out.

@brycetoups6431 2 ай бұрын

@@northeasterndirtandpropert7974 guess the minimum mph sign on the interstate is for people like you.

@jordancardinale6634 2 ай бұрын

Wondering what u think of your b26 power wise and size wise vs the LA 47

@northeasterndirtandpropert7974 2 ай бұрын

Personally,all depends on application.B-26,smaller,lighter,trailers easily,great around yards and small lots.Power wise,everything you can expect from 25 hp tractor.A bit better flow,lifting capacity and heavy built compared to other models.L-47,everything just more enhanced.Thanks for watching.

@jordancardinale6634 2 ай бұрын

Hey bud u keep your stuff clean.nice Cummins I’ve been driving them for past 21 years

@northeasterndirtandpropert7974 2 ай бұрын

I just find it too expensive anymore to not keep things in good shape.Plus,when I sell,i want to give a customer exactly how i described it,clean.

@TheMonkdad 2 ай бұрын

I own both. Piss away.

@TexasRiverRat31254 2 ай бұрын

OK...I don't need to have a multifunction FEL as I'm only using it around my property, not in an industrial environment. Isn't worth about $10K for a Kubota with a "treadle pedal". This seems like clickbait.

@northeasterndirtandpropert7974 Ай бұрын

No clickbait here.just facts showed between 2 tractors.BTW,I speak for both tractors saying,they are both good machines,except kubota always seems to be one step ahead.just like toyota,honda.Kioti will work awesome for everything except hard,repetetive loader work all day long.Just say'in it could become tiring.thanks for watching.

@countyofficer 2 ай бұрын

😂 Not sure why, but I can picture you walking away, electric weed eater cord bouncing behind, you carrying the conversation all the way back to the truck!!!! Now, just add in my drama skills to act out this skit!!!! 😂😂 Oh boy, always have it in writing and with the invention of phone cameras, you were playing it Willy nilly!!!! 😂 Always something new to learn!!! Cheers

@dkhill27 2 ай бұрын

Used motor oil and diesel works great. Just did my trailer with it

@ralphkrahn7440 2 ай бұрын

Dbl boiled linseed oil on spruce ,7 rs and going Once on both sides

@jeffvanderveen2890 2 ай бұрын

I'd probably build something simple to follow the valleys . Took 30 seconds to figure , this guy's losing the battle

@eneeland 2 ай бұрын

Hello. Your videos have really helped my build. Thank you. Quick question. Did you drill holes for bolts at the top of the panels in the back? I can't see any but I can't believe the top of the panels just rattle around in the C channel. Please let me know what you did there. Thanks again.

@northeasterndirtandpropert7974 2 ай бұрын

I believe you are required to drill and bolt thru the rear panels.

@bondjames652 3 ай бұрын

Motul 7100 10 40. That's what my TW likes.

@northeasterndirtandpropert7974 3 ай бұрын

Good oil.

@brandonpaul42 3 ай бұрын

Is it something that can be fixed or replaced to make the 2 functions work a little better?

@northeasterndirtandpropert7974 3 ай бұрын

This all comes back to oil flow design.And that all stems from the manifold that the oil passes thru to get to the control valve,to in turn get to the work area being the cylinders or attachments.This system is a BASIC,cost effective hydraulic system,no doubt designed to keep price down by using symplistic components and old school technology.I would say,not at all trying to redesign what Kioti already has.Just not cost effective.I have heard from viewers that the newer systems are better?I don't know.You just live with it,and go a bit slower.Thanks for commenting.

@kjy29 3 ай бұрын

Good thing it's an opinion video. Anyone who knows anything knows you don't know how to operate nor how to adjust the settings on the Kioti. You probably don't know because Kubota doesn't have hydraulic adjustments...

@northeasterndirtandpropert7974 3 ай бұрын

LOL.The video is based on two stock,factory setups comparing KUBOTA to KIOTI hydraulics.Also,you are not adjustng anything on a KIOTI that will allow you to double up on functions at once.What would allow the KIOTI to double function smoothly is the flow of the oil,and which valve or valves get the flow from the stack in a priority fashion.You can adjust all day long,you can't change the path of oil in that circuit,its all path of flow.Its a valving and manifold issue.Now,go and drink one of those SMART water drinks and get back to me.Also,I have to admit,you probably are a cracker jack operator,but your hydraulic theory is subpar.

@davevandervelde4799 3 ай бұрын

Love to know what you paid. I am in Canada too so it would be comparable. I am looking at a 2021 with 50 hrs on it.

@northeasterndirtandpropert7974 3 ай бұрын

I priced one new,about high 60's taxes in.You should be a ble to pick up a low hr machine,year does not matter,its about hours and condition,around the mid to higher 30's for a good,clean low hr machine.That a substancial savings from new,especially private home owner,no tax.Thanks for commenting.

@tuffteddy1446 3 ай бұрын

Used motor oil mixed 50/50 with diesel works well. 👍

@ryanc7929 3 ай бұрын

I have a 95 I just bought. Just took it up on the mountain for a ride. These things are like a German Tank! Yours is in great shape man!

@A..n..d..y 3 ай бұрын

Tire was only on backwards if you drive forward more then in reverse.

@alanskinner7031 3 ай бұрын

Back in the old days there was a valve below the seat on tractors that would adjust the flow rate to the front hydrlics. the HST tractors are a bad design to begin with. they do not build backhoes as HST for a reason.

@northeasterndirtandpropert7974 3 ай бұрын

I ran an M-62 KUBOTA backhoe yesterday.All hystat,well designed,proven technology,lots of power.Not a 580 case by any means,but a commercial backhoe and nice,dependable unit.Kubota's full line commercial backhoes,all hystat,Proven track record.Thanks for commenting.

@davefreeman1499 3 ай бұрын

creosote and diesel fuel is my guess.

@Dadnatron 3 ай бұрын

I just purchased one today. I was looking at this one or a Cat 308CR. I went with the Kubota 80 -4 with angle blade but rubber tracks. And I made the same diesel tank, but I put on an electric transfer pump. I did 'Raptor' liner paint on the outside, as it is incredibly tough. Widened out the base and welded on angle iron 'skids' to move it easily.

@cerysek11 4 ай бұрын

oilust changes in Engine and in Gear?or this ist the same?

Ең жақсы KZbin

Пікірлер