I love you and you are my hero! Had a big dumpster blow right into my wife’s door and dented it to where it blocked the metal piece from moving up! This video helped me flip it up enough to open the door and push the dent to free up the switch! Thanks for saving me hundreds!

There’s a lever on the motor. You push it down to put it in gear.

Will this work if child lock is on?

FYI I have a model built in 1999 and those two middle pulleys are not the same the pivoting pulley is the same diameter but it is wider/thicker. I believe the first guy had it for the entire 25 years and I'm the first one to do work on it which included actually patching the deck...

I've rebuilt a 16 year old traeger with rust inside and currently on a 7 year old. I watched your video for tips. The 7 year old ill keep since no rust. Looks like you did it right. For the inside, I'd do the oil and torch method to season it. And the buckets are cheap. i use one for my Blackstone and traeger. I also completely take apart the smoker, but that's my preference.

Good job

Chris: I literally have been at it for hours. The new pump module is in (Carter), and it just WON'T thread. It keeps jumping off the track. Is this the issue you had, or just the fuel lines being so short and the harness getting in the way? All I can think of is that the pump module is not compressing correctly or there is something on the track stopping it from threading, but I have been able to put the broken OEM part back in before so I think the issue is with the new pump. Mitsi no longer makes that OEM part. Thanks! BTW its frickin hot in a Phx garage now. 🔥

How did you get the screws out?

Did you ever do a part two i need to pull a 4.3 out of a vary similar boat

pulley that engages the belt is the same diameter but the pulley is deeper... just saying their not the same depth

Damn Chris this walk through is fantastic. I just busted mine and now I know how to fix it. Thanks!

hi chris, what is the part number of this kit? i did not see HiPa 360 on there site. mine is a stihl fs80

Which exact one did you get off amazon so I can order it

Hi Chris, how long did it take you to pull out the engine?

Looking forward to part 2 currently anticipating doing the same project very soon so I plan on referencing your content. Thanks!

Great help me a lot

Excellent Video - just what I needed. Both actuator and handle needed repair on my Nissan. I taped window in place, but still had to haggle with the metal brackets to set in exact spot to screw in. Pulling harness out of actuator was also hassle - had to squeeze plastic lock super hard to pull out. Could not have gotten it done without video. Thanks so much!!!!

Excellent job & definitely well done my friend. You should be able to run the life of the car now. I definitely agree 💯 percent with the better parts & xtra things changed. Keep up the super GR8 videos & congratulations Sir on a job well done.......⭐⭐⭐⭐⭐

Thank you, will be the first time I change my own oil!

For anyone with a 2013 Ford Escape Titanium series, make sure you get the one that has the "With Satellite radio option." The Part number Used was DS7Z-18936-D.

Okay I made it about 2 minutes into your video and realize you're just making this video for entertainment. I am a woman wanting to change my own carburetor and when you start saying real simple just remove this this and this and then show me how to do it in fast motion you lost me. A lot of us who don't know how to remove our carburetor don't know what all we need to unhook that's the part I needed to see so maybe for your future videos if you're really wanting to teach instruction do it in real time and teach us with instruction.

Thanks! I believe, I bought the same kit😂, very helpful

Thank you for this. It was exactly the tutorial I needed its helped a lot

Is the machine two-stroke or pure gasoline?

Again on the FS110 R, my inner air filter housing comes off WITH the carb when I take the carb off, and they feel as if bolted or screwed together. I hunted for what's holding them together with no luck, but from this video, it seems that maybe only the old gasket is what's got them stuck together. Is that the case?

On the FS110 R, those two nuts on the inside of the inner air filter housing are recessed in tight spaces, and no socket I have would go on them. I had to use needle-nose pliers.

Supposed to take 6 quarts of plus 2. Believe you put 10w 30 in it.

You have help me so much today I got this old reel mower I bought off facebook marketplace running I followed you step by step I got it running thank you 🙏🏼

Super Fantastic video. I'm thinking about doing my 92 Toyota pickup. Thanks for the info!!

Thanks for the help, just helped replace the bushing, however do lube the bushing before trying to install it. The hardest part of this fix was putting that bushing in place

HAPPY FATHER’S DAY to all the handy men out there! ❤ Thank you so much for this video.

You fast forwarded on the only part I needed

great info vid! but, do you NEED to use the part that adjusts steering effort, or can you just run it at a constant ?

What about a 2010 it's not the same?

Just did this repair and my experience was pretty much the same. But it helped me to have another person keep the window up and in its track while I put the 4 retaining bolts back in

What kit did you use? Having difficulty finding one that seam like a quality product

Omg ty I just gir the same one having the same issues gonna do this carb clean tomorrow ty great video!

7/8 deep socket and 9/16 deep socket and 1/2 deep socket

Great video and very helpful. Aligning the regulator and window is the hardest part as Chris mentioned. I tried using card board to keep the window in place while switching the actuator out. I think taping the window to the door would save time.

Great solution for Power Steering! thanks, might go this route instead!

I realize this video is two years old. It very much like others I have watched. The camera seems to cut away when doing the difficult maneuvers of assemble.

So, you are just going to let it keep rusting?... Ok...

I have a 2008 Pontiac Torrent GXP with the identical 3.6L engine. I did not know how to work the purge valve connections, thank you very much.

Thanks. Great video. My son has a 2013 Ford Focus EV hatchback that I was driving when the antenna got crunched. So it's on me to fix it and every other video took out the whole headliner (not!) or didn't make clear what they were doing. Even though your car wasn't exactly the same, I feel like it's close enough that I have the confidence to tackle the project. It's got to be easier than swapping out the lower high voltage battery, right? That was the last project I took on with his car, and it runs so this should be a piece of cake.🎉

The LARGE line had the nipple, it is the return line, small line it the one filter goes on, but very informative thank you.

Thanks for the video. We can’t get ethanol free gas in Canada anymore 😢

Hey Chris, you mentioned a deuce and a half, do you think this would work for that application? I’m about to try myself which is how I found your channel. Let me know your thoughts on this! Thanks I appreciate any insight you can give.

How do you get the belt off 💁‍♀️🤦‍♀️

Hello friend, hey, my Suzuki intruder 800 motorcycle doesn't want to start, it doesn't start, it doesn't turn on, it doesn't turn on any lights, do you think it's the same thing that's happening to my motorcycle?

Someone gave me one a said it was unleaded gas only no mix. Is this true ?