The TV bracket should come with the anchors and screws. At least most do.
@yesidrive3 күн бұрын
Good ol fart bubble aka fart dust
@Amite-zg2ob3 күн бұрын
Absolutely horrible stuff do not use use on your rubber surfaces. You will be sorry.
@huss96293 күн бұрын
So just plastics?
@richclarke15233 күн бұрын
Just did this today. I think the applicators are too small...BUT.. the stuff evaporates very quickly, so work fast...it's evaporating on the cloth, not just the work area. I have a Sprinter, and it took 7 cloths for one application, might need second coat. It is a 2008, so almost 20 years of dry plastic, and lots of it. Looks great.
@Cornaynay5 күн бұрын
I’m not seeing a disconnected hose but my truck just did this. It was coolant poring out onto the road as well. I’m praying it’s not the radiator
@lllmmm35726 күн бұрын
I'm getting ready to put one of these in. I'm going to watch it in reverse.
@SayWhaaaaaaaaaaaaaaaaaaaaaaat11 күн бұрын
WHY DA FUKC FILM,ING WITH EMPTY BOTTLE?
@infernomaster270211 күн бұрын
just got my Camaro back today. It is a 2016, so GM did NOT cover the transmission fluid flush's with the new Mobil 1 blue label ATF fluid. I had to pay out of pocket, and it was pricey. Also got the rear differential changed while I was at it. The shudder is gone..... FOR NOW. I hope it really does not come back
@chcknmr13 күн бұрын
Who keeps breaking glass?! O_o
@cibonthesaint890315 күн бұрын
Dude, get to the point and stop walking around in circles or stop drinking one of the other
@SebastianBalos15 күн бұрын
@@cibonthesaint8903 sorry man! Not my greatest vid!
@christinepalomovideos15 күн бұрын
hahahaha!!!
@lynnnguyen796816 күн бұрын
Your “Pathetic life “ is a lot better than some of us dude 😅
@rickybryan639319 күн бұрын
Yeah 2 thumbs up on this fine video . keep up the good work .
@georgesontag219219 күн бұрын
Probably not a good idea to just toss the junction box and wiring in the back and push the washer in. If a leak occures, the junction box is not protected. An electrician would mount it correctly.
@MK-gz1xt23 күн бұрын
A friend of mine spray-painted it with matt black he did his trims bumpers everything and it came out great and it was 2 years ago. Just food for thought.
@JennySmiles25 күн бұрын
Impressive you did this with a beer in your hand the whole time hahhahaha My bad trait is believing I can do this now after watching LOL you did great
@SebastianBalos25 күн бұрын
Every DYI requires a beer and some swearing! Cheers!
@khanhle-vu2hh25 күн бұрын
Man your work to me is masterful
@cskipper6526 күн бұрын
That is a very lightly used garage. If you are a car guy meaning you do your own work this is a nightmare waiting to happen.
@garoldcounts877726 күн бұрын
I wouldn't put more gravel in, buy fire brick. measure 4.5 in below your cap stone and mease the thickness of the brick you choose and fill the difference with sand and dry set them. you may need to have a layer of garden cloth to keep the sand from settling. the floor will tuck under your cap stone . They will make for an easy cleanout. . It looks great, good design and build.
@geoffbernhardt13728 күн бұрын
I've been dealing with this issue since I bought my 2017 Camaro brand new. Took the car to two different dealerships and the said they found nothing wrong with the car that I just needed to drive it more and the issue should go away. Now my car is no longer under warranty and I'm afraid I'm going to be stuck with a $600 bill to have my transmission flushed. Thank you for the info on the GM bulletin.
@infernomaster270211 күн бұрын
got mine today, cost me over 600 bucks as well. NO one who owns one of these should have to pay for this shit regardless if you are out of warranty or not.
@GosWardHen9828 күн бұрын
Nice tutorial, solves my problem. Cheers!😅
@pwrshotsАй бұрын
Is it going into v4 mode??
@philindeblancАй бұрын
The DE powder is supposed to be there. but when it gets plugged up, it cant clean/filter any more. You can take the top manifold off and clean the grids individually. This is recommended at least 1x-more like 2-3 times a year. But your filter is big vs your pool, so. Another thing I have seen done, is taking the filter cap off, and doing backflush while you hose it. Can be messy if water can collect in the area. BTW, I too am no expert either, and I am at the point of getting algea back after shocking it out. What is the chemical levels you keep for your pool to stay algae free? I know running the pump is the #1 way to keep algea away as water remains being filtered and moving.
@philindeblancАй бұрын
Is it brighter or not? You missed one main point. Cheers!
@philindeblancАй бұрын
How do you have a 12v feed? How new is your pool? When did they start making pools with LED as a standard?
@SebastianBalosАй бұрын
@@philindeblanc the pool is 20 years old. 12V is considered “safe “. Seems like they have been doing this for a while.
@philindeblancАй бұрын
@@SebastianBalos Thanks for clearing that up. I didnt think those 250watt old school bulbs could run on 12v. thought it was for LED , as they are efficient. Oddly, today found a bit of very thin plaster, the size of a couple quarters flake off my step. My pool is pretty old as well! How are the winds in Kokomo? Looks beautiful! Cheers...but we gotta talk about this Miller beer your having! LOL...
@SebastianBalosАй бұрын
@@philindeblanc At 20 years my pool is due for an overhaul. a pretty big overhaul is in the mental works at this point.. ill likely make some vids on it.
@michaelsunderland6569Ай бұрын
Im not sure about the type of flooring America has but in the uk it is not a good idea to glue flooring down or grout it as the wood needs to able to expand and retract during cool and hot whether unless im missing something neat and tidy job just curious if its gunna last for 10 to 15 years as they should
@rhondabradfute8866Ай бұрын
how much was the counter top without the labor? Just for the bar side...avg?
@SebastianBalosАй бұрын
@@rhondabradfute8866 its to hard to say. The countertop company hides the costs really well. I will say that the installers were a third party hire. So there is a lot of middle man money involved. There are savings to be had on the instal but you would really need to dig.
@AanRomadoniАй бұрын
Hallo Sab, my question, I have MS6, and maximum pressure is 6 bar. But why ms6 only get 2,4 bar??? Happen after safety instruction fault. Any related with neca ?? Or you have comment? Please..
@AmericanDingo980Ай бұрын
How do you seal the stone around the sink faucet? Do you leave the faucet attached or does the sealer stain the faucet at all?
@SebastianBalosАй бұрын
You can leave the faucet on and wipe off any access that might touch it. Ive never had an issue where it left stains. Tape it off if you have concern as an extra caution. Cheers!
@andrewdavis2276Ай бұрын
A piece of green uni strut works great for removing those plugs
@samc7071Ай бұрын
I don’t think it was overkill to drop the pan n clean it. It helped you get it flushed out quicker, and a clean pan is better than a dirty pan. Glad it worked!
@montemagАй бұрын
Hey, thank you for your video. But I am hoping you can help me with a little different problem. I had a Briggs and Stratton surface cleaner that only works with machines of 2400 PSI and above. I used it with my old Gas machine of 2800 PSI(I am a homeowner and did not need a higher PSI for my small property.). I always had trouble starting the gas machine so I purchased an electric Craftsman 2100 PSI from a local hardware store and now that Briggs and Stratton surface cleaner will not turn with the lower PSI electric machine. So I bought a new surface cleaner from eBay and on the first outing it did a bad job. It was leaving circular marks. The seller said to clean the nozzles that it must have gotten dirt in them from the gun and wand. But it was the first time I was using it? How can that be? So he recommended I use that wire tool to clean out the jet nozzles. But when I squirt water after that the water does NOT come out the other end. I do not need it for a large project and I was hoping that this easy-to-use electric washer will work with this lower surface cleaner that is MADE for the PSI on this electric machine. Here is the item I purchased from eBay take a look--( 15" Pressure Washer Surface Cleaner Pressure Washer Extension Scrubber 3200PSI US $36.99 Sold by: interstatesuppliesandservicesuser ID I am frustrated. Can you advise? I also am looking at another machine with a higher PSI but I never heard of this product- maybe you can advise on this one- if it is better than my craftsman I will be able to use my BRIGGS and Stratton surface cleaner because it works with the higher PSI machine. ( (PowRyte Electric Pressure Washer Foam Cannon 4 Different Pressure Tips)-- Is this a solid machine that will be better than my Craftsman electric. OR can you tell me if Craftsman Electric is a good machine as is and just to get a better surface cleaner that will work with a low PSI machine.. here is my Craftsman unit---(CRAFTSMAN Electric Pressure Washer, Cold Water, 2100-PSI, 1.2 GPM, Corded (CMEPW2100) Thank you for listening. I am frustrated.
@SebastianBalosАй бұрын
There is no question that I higher PSI pressure washer will work better. If this was my situation, at this point I would try to bend nozzles on the cheap surface cleaner to more of an angle to see if it helps rotate it. mind you, if you have the confidence to try to bend them you might lose cleaning pressure at the expense of "spinning". I have both an electric and gas power washer. In my situation I know the limitations of the electric and use the gas when I need more power.
@michaelcrabtree3370Ай бұрын
Love it Dude. Fucking Awesome. I am going to do the same.
@SebastianBalosАй бұрын
Appreciate the comment! Cheers to you!
@user-wf8je6up2iАй бұрын
so if i decide to buy a used Nissan frontier 2004 -2010 i need to make sure i bypass the Trans Cooler and buy after market like this ? Tru-Cool LPD 4588 Automatic Transmission Cooler 19,000 GVW LPD4588 Fluid Oil True-Cool OC
@SebastianBalosАй бұрын
You can buy an aftermarket transmission cooler if you wish. There are people that have just left it bypassed with no issue. Your call. Cheers!
@smcad2000Ай бұрын
Using a Vette as a worktable??
@SebastianBalosАй бұрын
The Xterra is my baby!
@SmokeeeTreeesАй бұрын
Did you prep it?
@SebastianBalosАй бұрын
Just a regular wash. thats it. Cheers!
@carolinaaguilera4221Ай бұрын
Potty mouth!!
@furrykidz2 ай бұрын
Any idea what the size of the snap rings are? Ours were so rusty they snapped before they came out.
@SebastianBalosАй бұрын
I dont know the exact size but perhaps this will help with your issue. amzn.to/45t1mtH
@dwightgoodman21162 ай бұрын
I have a 2016 (base) Stingray automatic. Had been experiencing the transmission "shutter" as you call it. In actuality, in cruise control "D' mode (not manual) at road speed (60-70), you would see the tach jump up and then back down about 200 rpm every 7 or 8 seconds...and yes, it felt like you were hitting construction joints in the roadway. No noises...no violent car moves. When put in "manual" mode it will not do this. What I have found is that GM in their wisdom to make all the gas mileage from the LT1 that they could, caused issues with the trans. It cycles in and out from 8-cylinder...to 4-cylinder mode. My fix...I had a mechanic update the firm ware to "cut-off" the 4-cylinder mode totally. Mine stays in 8-cylinder all the time now and I no longer have the shutter issue. I do not use "eco" mode at all...never did. Next thing to do....I'm having the transmission flushed and filter changed to Mibil 1. That should help the trans overall.
@SebastianBalos2 ай бұрын
What you are describing is also a common issue but different from the one I described. Most GM V8's seem to be prone to AFM/DFM issues as you describe. They have been for years. This issue is more specific to the lifter deactivation. The one I describe is narrowed down to transmission fluid. The cylinder deactivation has been a long lasting issue that GM refuses to admit and there are a lot of ways to get around it. Most people (me as well) have resorted to purchasing a AFM disabler device. Go on Amazon and search "GM cylinder deactivation" and you will find plug ins to get around this concern. Cheers!
@parlaypaul4052 ай бұрын
im dizzy watching this
@SebastianBalos2 ай бұрын
It a new way to get high!
@robertbass9742 ай бұрын
I bought my 2016 Z06 new in September 2015 and have never had any issues! My seventh vette and by far the best. I do have the new trans fluid because my dealer called me and said to do it at no charge.
@krishdasgupta73132 ай бұрын
Please stop spinning.
@brianmontgomery10762 ай бұрын
Great video, super helpful and much appreciated! 👍
@SebastianBalos2 ай бұрын
Cheers!
@Danielxperez142 ай бұрын
Hey man is it still going strong?
@SebastianBalos2 ай бұрын
I have a 1 year update pinned in the comments. As i write this its still roughly in the same situation. It will fade overtime. I dont see it as a big deal. Just reapply. Cheers!
@TheBourbonFarmer2 ай бұрын
Your first clue should have been when you blew up your 12v bulb in the house.
@cassandrabauerle52622 ай бұрын
THANK YOU so much for this. We are trying to decide to remove ours. Perfect and great job !!!!
@royt78572 ай бұрын
Dude, don't film when your buzzed.... Could not watch this as we kept spinning and spinning... and spinning...Thank you for the buzz!
@SebastianBalos2 ай бұрын
Its the only time i make KZbin vids!
@GODofDeeStruction2 ай бұрын
I really enjoyed the cursing. As a Paratrooper Combat Veteran, I needed to hear some cursing today and it felt good lol
@sagefi12 ай бұрын
Yam - aha 😂 I never knew so many people pronounce these major brand names incorrectly.