chizel lo by harley davidson, don't know if they still make them or not.

Sorry, yes I just checked them..yes 6" rise

@@harrytinsley1199 thanks man, them look sweet I need then for my bike

I used a lay down plate frame from ebay for older sportsters, center it up and drilled some holes. Still working fine over a year and 9500 miles later.

@@harrytinsley1199 Did you wire it so it is lit up at night?

@Canaan Tinsley Thanx, sounds and looks real good

scale of 1 to 10 - 10 being crazy loud straight pipe, I would say this is 7- I have a indian scout with freedom radical radius and it would be a 8.5 to 9. My sportster with rsd tracker would be a 6.......oh I would say stock is 2.5 to 3 for a reference on the lower end.

Harry Tinsley awesome thank you for the fast reply

Just brake line...nothing else changed.

Two Brothers Racing Comp 2-1

They can be pulled back or forth, you can adjust however you like. Just the brake line should do it. Harry

I can't find a link - They are Harley Davidson brand, Diamond Black line - You have to buy a upper and lower line. email me direct at [email protected] and I can send you scan with all part numbers and sizes - instruction sheet that came with the brake lines.

No, these are about 5" rise only.

I guess to ask and see the wiring before they plug in the extension. With the Chizel Lo you will have plenty of slack in the OEM Handlebar harness and don't need any extensions. I did elect to put the extended front brake line, although I think you could get by without it for a while, it does not have the slack I think a front brake line really needs.

how about the clutch?

had them watch the vid

Stock clutch cable is fine, I have never replaced it and it fits great...throttle cables are also stock...and fit fine.

Do you think this looks like the the Bitwell Zed Bars? man this looks so good though.

www.harley-davidson.com/us/en/shop/chizeled-lo-handlebar-gloss-black/p/55800431

yes, you could put risers under them no problem. harry

Harry Tinsley, thanks. Awesome looking bike. Enjoy!

no, stock wires are plenty long enough.

No, you just flip the mirrors you have, if you want the nut to look like the ones on the 48 you have to buy that from harley - $5 each

Harry Tinsley thank you sir!!

These bars have a 6" rise.

@@harrytinsley1199 Harley site says 4"

Turn signal kit is 68643-09, it says put on the bottom bracket, but works on top too. Brake lines are black diamond from harley non abs is 41800256 upper and 41800228. Got all but the lower brake line from ebay and saved quite a bit there.....but got lucky I didn't have to wait too long.

Brake line was only thing I had to replace. It was out of caution, you might get away with stock but really should replace that.

@@harrytinsley1199 you don’t have to extend wires but what size bars???? Lol you literally made no mention in video, then you respond to the guy above who asked what size bars because that would be the most helpful piece of information with a video like this and you ignore his question and responded with something else that was mentioned in the video. Come on my guy!