I don't have an M1 so I can't say for sure, but I think that you'd have to connect with USB first and then go into machine settings and enter your wifi password. Once that's done, XCS should be able to find your wifi to connect.
@josephbeirne1003Ай бұрын
Great Video :) but when I right click the creat mask is blanked out and can not be clicked, why would this be?
@DarkMoonEmporiumАй бұрын
Do you have both objects (picture and shape) selected? If so I don't know why you wouldn't be able to activate the mask. Thanks for the kind words!
@josephbeirne1003Ай бұрын
@@DarkMoonEmporium My bad I didnt do that, thank you :)
@anniew9785Ай бұрын
Thank you for all the videos! How do I change the default font and default font size? I have 200 personalized ornaments to make and I need Lobster welded 36 pt. I do not want to spend all the time changing each one individually. Thank you for any help you can give me!
@DarkMoonEmporiumАй бұрын
@@anniew9785 Thank you for the kind words! I wish I could tell you how to change the default font but I don’t think it’s possible. Sorry I can’t be of more help
@richardjones8236Ай бұрын
I felt the length of tutorial was fine. I prefer one comprehensive review rather than several smaller ones.
@DarkMoonEmporiumАй бұрын
Thank you, I'm so pleased that you thought that it wasn't too long!
@kathymiller2163Ай бұрын
Super for this time of year! Does anyone know where the top tick marks go? TYFS
@elizabethagee4313Ай бұрын
THANKS AGAIN FOR ALL YOUR HELP
@DarkMoonEmporiumАй бұрын
You are very welcome!
@elizabethagee4313Ай бұрын
You have helped me so much THANK YOU 😊
@DarkMoonEmporiumАй бұрын
Glad I could help. Thank you for your kind comments!
@elizabethagee4313Ай бұрын
I finally got my ornament done,but I do have a question ⁉️ when you but the outline on the Star why do you do it two times, cause I can't figure out what you do with it!!? Help cause when I run it it keeps telling me that I haven't done all the perimeters and it wants me to set permeters for the second outline on the Star that we hid....
@DarkMoonEmporiumАй бұрын
Oops, it looks as if I edited out the bit where I deleted Layer 2 (the hidden layer!) . My mistake! Thanks for drawing my attention to it. I'll put a correction in the description.
@elizabethagee4313Ай бұрын
@@DarkMoonEmporium thank you I just love the ornament and the way you take ur time. The F1 is my first laser and I feel so proud of myself All Thanks To You 💗🙏💗
@josephpotterf9459Ай бұрын
Question what inserts your project into the cloud i've had a couple appear there but dont know how .. i want to make logos in my office then use my phone in my shop i turn wooden bowls This file movement is a real problem. xcs help as far as i can find fails to mention it other than they will sell more space.. So far i've not found one on this subject i'm missing some step.
@DarkMoonEmporiumАй бұрын
Thsnks for the question. I use File>Save As and then select a folder on my Cloud drive.
@josephpotterf9459Ай бұрын
@@DarkMoonEmporium Thanks turns out on the right top it says upload from computer with what is a cloud to the left and this is what moves it but it works in the background. And magically appears in the cloud when opened. I will try your way as well as i didn't know i had a cloud drive.
@naomivause26832 ай бұрын
You're a lifesaver I've just cut hundreds of hydrangeas petals which all stuck and needed poking out but my next one will be much easier, thankyou thankyou thankyou.
@DarkMoonEmporium2 ай бұрын
Happy to help!
@jacedddd2 ай бұрын
thanks for this, thinking of buying an f1, so this was good info
@DarkMoonEmporium2 ай бұрын
I love my F1! Thank you for taking the time to comment.
@Alexanderiii2 ай бұрын
Please can you tell me how you were able to change the text from HELLO. I have tried using my left mouse button and the right one but in both cases it just put squares and rectangles around the text and I couldn't change it at all.
@DarkMoonEmporium2 ай бұрын
Just left- click anywhere on the text. You should see a blinking vertical line. Once you see that you can go ahead and edit the text. It can be a bit fiddly so keep trying.
@Alexanderiii2 ай бұрын
@@DarkMoonEmporium I was left clicking on the text but there was no blinking vertical line only the squares and rectangles. I am using XCS v2 for the f1 Ultra. Maybe it is different for this machine. 😔
@jodiemeschke68893 ай бұрын
Wonderful informative video. As a beginner I learned so much. Thank you for sharing.
@DarkMoonEmporium3 ай бұрын
Thank you for your kind comment!
@mrjay5on3 ай бұрын
Great videos, I'm learning fast with these on my S1. Is it possible to select all text boxes and change the font style and text all at once?
@DarkMoonEmporium3 ай бұрын
I just tried selecting multiple text boxes and changing the font and yes, it worked! Thank you for your kind comment.
@mrjay5on3 ай бұрын
@@DarkMoonEmporium I'll give it another try. I created a pencil jig and trying to engrave the pencils Roboto font at 17pt looks good! :)
@linzijohnson4523 ай бұрын
This is so helpful!
@DarkMoonEmporium3 ай бұрын
Thank you, I'm so glad you found it useful!
@TheGpnanny3 ай бұрын
I just subscribed and will be watching all your videos. I just bought an F1 and thought the software looked so similar to Cricut design space that I would just pick Creative Space up no problem..NOT!!! Thank you so much for your slow detailed video, it helped me understand the tools and options available. I plan to binge watch your channel this weekend.
@DarkMoonEmporium3 ай бұрын
Thank you! I haven't been posting much lately as I'm in the middle of moving house but I hope to be back with my take on all the new features in XCS, so please do come back again sometime!
@mohnalisa1233 ай бұрын
Thank you for this great idea and the very well-made video. Although my English is not that good, I will be able to recreate this great box. I do have one comment though: why are you using the bone folder upside down? The tip is flattened so that you can stroke the paper with a wider surface. At the same time, you press the paper flat so that you don't have to correct it with your fingers, as you did at minute 2:01. Try it out and you will be amazed. Best wishes from Germany. J.
@DarkMoonEmporium3 ай бұрын
Thank you for the tip, I shall try it! And thank you for your kind comment.
@purespirittarot38454 ай бұрын
Thank you wonderful video ❤
@DarkMoonEmporium4 ай бұрын
Thank you for your kind comment!
@Cmott4264 ай бұрын
Will this work with a Diode Laser?
@DarkMoonEmporium4 ай бұрын
Yes! That's what I used!
@angiestewart99524 ай бұрын
Thank you for this! Do you know of a way to engrave each letter individually instead of it doing the whole word at one time? I want to ununite the letters:).
@DarkMoonEmporium4 ай бұрын
If you don't want to enter text one letter at a time, you can use Outline to make a vector and then use the vector editor to make changes. The vector tools are going to be my next video, but right now I'm in the middle of a house move so it may be a while before I can get to it. I'll try to post a quick video and put the link here - kzbin.info/www/bejne/oGqqpnljha-NnMU.
@yshahs64 ай бұрын
Thank you so much for your prompt reply ❤
@DarkMoonEmporium4 ай бұрын
You're welcome!
@NKHandcraftedGifts4 ай бұрын
what was that material that you put rubber stamp and sticky double sided tape on? Was it a foam you said?
@DarkMoonEmporium4 ай бұрын
Yes, craft foam! If you can get the slightly thicker kind (about 2mm) that seems to work best.
@grisselle19724 ай бұрын
Too much
@bernhardmahl59714 ай бұрын
As this is totally new to me, I found this and your other step by step video highly informative. Like to suggest you consider doing a practical follow up video such as changing the name on a name flower.
@DarkMoonEmporium4 ай бұрын
Thank you! And that's a good suggestion. Due to some personal stuff going on ( Life happens!) I've not been able to do much in the way of tutorials lately, but I'll be back soon and will give it a go!
@JanReeves-r2q4 ай бұрын
Thank you so much for these great tutorials. You present it so well. I look forward to more.❤
@DarkMoonEmporium4 ай бұрын
Thank you! I'm happy to help. I was working on a video about the vector editing tools and blow me down, XTool just released an update so I'll have to go back and redo it- but stay tuned!
@JanReeves-r2q4 ай бұрын
@@DarkMoonEmporium Definitely. I was just able to do a business card with graphics on aluminum using your tutorial. Thank you so much.
@teresasmal87274 ай бұрын
Hello! Thank you for making this video. Do you know what can be wrong? We got the S1 and the time for autoplanning and user defining is the same time. Kind regards
@DarkMoonEmporium29 күн бұрын
Sorry, I don't have an S1. I'd suggest contacting XTool. They are in China, so it can take some hours before they get back to you, but they are very helpful.
@myrlinlesikar4044 ай бұрын
Another great video.
@DarkMoonEmporium4 ай бұрын
Thank you! I'm so happt you liked it!
@myrlinlesikar4044 ай бұрын
Have watched and taken lots of notes on the Xtool XCS 2.0. Appreciate the fact that you split up the videos so you could give so much detail. Thank you.
@DarkMoonEmporium4 ай бұрын
Thank you ! I started out to make one quick video, but there are just so many features I had to split it up. I'm glad you found it helpful.
@myrlinlesikar4044 ай бұрын
Love the detail in all your videos. Have just finished watching my third on the Xtool Creative Space 2.0. I have the S1 40W and learning as much as I can so I can get started making things. Thank you for making such detailed videos.
@DarkMoonEmporium4 ай бұрын
I'm so pleased! Thank you for leaving such lovely comments!
@myrlinlesikar4044 ай бұрын
Another great video. I really like the fact that you made three because each are very detailed. Also like that you take your time. I am new to lasers and have been taking notes. Subscribed a few minutes ago.
@DarkMoonEmporium4 ай бұрын
Thank you - and there are more videos to come, so thanks for the subscribe!
@stegmater5 ай бұрын
I tried using this software but ending up using Lightburn. Missing an easy way to set kerf and doing measurment of line with tabs an slots, hope this will be there in the final version. But the machine is great, love my S1 40w.
@DarkMoonEmporium5 ай бұрын
Lightburn is great and the more advanced user will probably grow out of XCS at some point. I switched over to Lightburn almost immediately when I got my D1 because XCS was pretty limited at the start of 2023. I went back to XCS when I got my F1 because Lightburn doesn't really play nicely with the F1 and I was honestly very surprised at how far XCS has come - it's a nice balance of ease of use and design functions, and it's free - my favourite price! I'm also impressed at how XTool seem to be listening to their user requirements and iterating - they continually added features to V1. If there's a demand for more advanced features I'm sure they'll be working to develop them. BTW, I'm not connected with XTool in any way - just a granny with a laser!
@gustavov78005 ай бұрын
Hello, the screwdriver is a flat tip.
@sherylfalls6 ай бұрын
Thank you
@DarkMoonEmporium6 ай бұрын
I'm happy to help!
@mariomarquezsantiago92216 ай бұрын
hi, what parameters need?
@DarkMoonEmporium6 ай бұрын
I used blue laser, Power 100%, 30mm/s, 260 lpcm, and 2 passes. As always, you should run a test to be sure that your parameters are correct as so many factors can affect the outcome.
@shughes5996 ай бұрын
I downloaded yesterday 4/6 and it is v 2. So glad you made this timely video. Xtool has guide published but videos are better imo. Used lightburn for a year now, i got real confused on layers in this and controlling output, i like how lightburn dims art that isn’t set to output, just an opinion. Look forward to next video.
@DarkMoonEmporium6 ай бұрын
Thank you! I'm working on part 2, should be ready soon!
@ashleybass49077 ай бұрын
i’m getting an xtool f1 for my birthday in may and this is one of the crafts i want to do. your video was detailed and informative but not super long and dragged out for me for being a first time user. THANK YOU!
@DarkMoonEmporium7 ай бұрын
Thank you for the kind words - and welcome to the F1 family for May!
@everlastingmedia8 ай бұрын
"Title Text Here" at 5:30
@DarkMoonEmporium8 ай бұрын
Ooops! Thanks for telling me!
@PhilMorin-o6p9 ай бұрын
Thank you
@DarkMoonEmporium9 ай бұрын
Happy to help!
@lizzystitch48429 ай бұрын
Another idea: just use a piece of printer paper or scrsp mail. Works like a charm!
@DarkMoonEmporium9 ай бұрын
Great idea !
@dr-onestuffido9 ай бұрын
Another great video, very informative as always thank you 🤩
@DarkMoonEmporium9 ай бұрын
Thank you! I'm so glad you found it useful!
@dr-onestuffido9 ай бұрын
Exactly what I was looking for thank you 🙏 keep up the great work
@DarkMoonEmporium9 ай бұрын
Thank you! I'm happy I could help!
@dr-onestuffido9 ай бұрын
We have many things in common and iv'e just bought the Xtool M1 and was looking for exactly this :) Your tutorial was spot on and easy to follow so thanks again :)@@DarkMoonEmporium
@boomanh639 ай бұрын
I just recently got the F1 and noticed the dots did not line up with each other, parallel yes, but not on top of each other. XTool does not have anything about it on their site that I could find, thank you for this video! Now I know my machine arrive not truly setup to work out of the box!
@EvolvedSungod21 күн бұрын
Same for me, and I was also shocked I haven't seen this tip anywhere but in this video. Such an easy fix
@darlaporter25439 ай бұрын
Do you have the link for the paper?
@DarkMoonEmporium9 ай бұрын
This is what I used - www.amazon.co.uk/Uadme-Laser-Carved-Colored-Paper/dp/B0BML7D5WK/ref=sr_1_5_pp?crid=1SB23K9RVW9JL&dib=eyJ2IjoiMSJ9.nQUjjcH3pf74MngxSRA-oe6p-6h14TdYRRjZ-Jt7p-ba1w9Nw6UV872OR48Vfk4XsJglTyIejQ3rx4r_T3dVWi3mqasJJ3v0yNMg3vA8jLLpiANch1EvBauQ67MqyAWtKv-6DG0zX5ygIPH_hAZ_eQ.K87snPYvHeJUIGO8e151BBCYC87dcNa0cBl4ugy1LfI&dib_tag=se&keywords=laser+marking+paper&qid=1705216869&sprefix=laser+marking+paper%2Caps%2C91&sr=8-5
@Amberdogproductions9 ай бұрын
I have a 3d printer, but you make it look so easy to use the F1. I'm waiting on mine to show up and pretty nervous about all the programming and layers, settings, all of it.
@DarkMoonEmporium9 ай бұрын
Thank you ! I love my F1 and my D1, but I will admit that I was very nervous before I got going so I think I understand how you're feeling. The XCS software is very easy to use and a great place to start.
@Jacbean109 ай бұрын
Thank you!! I was struggling on where to find the curve.
@DarkMoonEmporium9 ай бұрын
Happy to help!
@sabinegrutzmacher563510 ай бұрын
schon anstrengend dieses Musik, hätte das Video lieber mit Erklärung gehört. Schade das Endergebnis ist aber toll
@jessafeig9010Ай бұрын
Den Ton kann man ja auch ausstellen :D
@GoldieLokz10 ай бұрын
Is this unavailable unless we do the update? I still haven't done it because I've heard such negative things. But I really want this feature.
@DarkMoonEmporium10 ай бұрын
Is it the most recent version as of December 2023 (1.7) that's causing you concern? This feature was released in V1.6 so you shouldn't need to update beyond that. (Just FYI, I updated firmware and software yesterday with no problems at all using USB - I've had issues with updates over wifi in the past).
@GoldieLokz10 ай бұрын
@@DarkMoonEmporium I'm not sure what update it was as I'm still pretty new to XCS. But I've heard a recent update changed the whole layout of XCS.
@davidconaway283010 ай бұрын
Two thumbs up for a short, to the point and comprehensive tutorial. Thank you, thank you, thank you!!!!!
@DarkMoonEmporium10 ай бұрын
I'm so glad you found it helpful!
@bayoudreams39511 ай бұрын
@DarkMoonEmporium Thank you very much for the template details. I have a question where you created (moved) to a new layer. I don't see how you did that. I have layer 1 completed up til after you combine/subtract. I added a layer 2 but can't see how to go past that point. When I select "move to" it just changes the color of the layer.
@DarkMoonEmporium11 ай бұрын
Could you tell me the point in time (e.g. 3 minutes 30 sec ) where you get stuck?
@bayoudreams39511 ай бұрын
@@DarkMoonEmporium Starting at 2:20. I'm running XCS on Windows. Downloaded from xTool website but I don't see any version info...2 days ago so I take it that's it's the latest version available. I haven't received my F1 yet as it's still in the mail, and at the top it says "D1 Pro". I grabbed everything, as you did, Then I see your pointer select "cut" then go to the Setting "Manual setting field". I clicked it, tried the pull down..nothing. Wonder if it's something on my end. Thank you for trying to help me out. I printed the screen if you wanted to see where I am in XCS. I think my F1 won't be here tll Dec 1. I'm trying to get up to speed before then. I've watched your video 4 times now and redid the project 3 times to see if I missed something. I also manuall created the 2nd layer.